xTool MetalFab Laser Welder/ CNC Cutter

1200W / 1200W Welder

$7,999.00

$7,999.00 $7,999.00

1/20

xTool MetalFab Laser Welder/ CNC Cutter

$7,999.00

$7,999.00 $7,999.00

Machine Power

Package

World's First Smart Metal Fabrication System

xTool MetalFab —
Weld. Cut. Clean.
Your Entire Metal Shop in One Machine.

The world's first all-in-one laser welding and CNC cutting system. Weld up to 5mm steel, cut up to 10mm metal, and remove rust and surface oxidation — all with one fiber laser head that detaches from the CNC table to become a handheld welding gun.

1200W fiber laser power

5mm max weld thickness

10mm max cut thickness

10,000h laser lifespan

All-in-One Metal Workshop

One Machine. Five Metal Processes.

Traditional metal fabrication means five different machines, five different skillsets, and five times the floor space. The MetalFab consolidates everything into one system — the fiber laser head detaches from the CNC table in seconds and becomes a handheld tool for welding, cleaning, and handheld cutting. No other machine works this way.

CNC Cutting

Automated precision cuts up to 10mm at 400mm/s with ±0.1mm accuracy.

Laser Welding

Continuous, spot, and pulse welding. Up to 5mm thick. Cleaner than TIG/MIG.

Handheld Cutting

Cut metal in tight spaces and odd angles where a CNC table can't reach.

Rust Removal

Non-contact laser cleaning removes rust, oxidation, and surface coatings precisely.

Surface Cleaning

Prep metal surfaces before welding or finishing — no chemicals, no abrasives.

Industrial-Grade Performance

Welds That Beat TIG. Cuts Thinner Than a Human Hair.

The MetalFab uses a fiber laser — the same technology found in industrial shop floors — to deliver heat-affected zones of just 0.002 inches. No warping, no distortion, no grinding required to clean the weld. SGS-certified and AWS-validated for professional-grade output on every job.

Stainless Steel Weld up to 5mm · Cut up to 10mm · Clean rust and oxidation with zero contact.

Carbon Steel Deep single-pass welds. Clean kerf cuts — width as thin as a human hair.

Aluminum High-reflection metal handled with precision. No warping on thin sheets.

Brass · Titanium · Nickel Alloy Dissimilar metals, specialty alloys, galvanized sheet, and magnesium — all supported.

Exclusive Technology

Three Technologies No Other Machine Has.

xTool built three proprietary systems specifically to solve the biggest pain points in small-shop metal fabrication — vibration, gas cost, and material waste.

VibeFreeCut™

Eliminates vibration interference during CNC cutting. Delivers razor-sharp edges on every pass — no chatter, no rework.

FlexiTrack™

Maintains perfect focus and center deviation below 0.008" even on warped or uneven material. Consistent results from edge to edge.

SaveGas™

Proprietary ceramic ring seal nozzle cuts gas consumption by 50%. Burr-free cuts on 4mm stainless steel at just 87 PSI — half the pressure of traditional systems.

Smart Dual Camera System

98.7% Material Utilization. Zero Wasted Sheet.

The dual 16MP camera system powers AI Smart Nesting — one click analyzes your sheet, generates optimal cut layouts, and maximizes material usage to 98.7%. The close-range camera maintains 10-micron alignment precision on the cutting head. Every inch of your metal stock works for you.

Low Learning Curve

108+ Built-In Parameters. One Click to Start.

No welding experience required. The MetalFab ships with 108+ pre-configured parameters covering every common metal, thickness, and process. Select your material, select your process, and the machine sets itself up. First-time users are laying clean beads within minutes — as reviewed by Make: Magazine and confirmed by users with 40+ years of welding experience.

Technical Specifications

Everything You Need to Know.

Laser type	Fiber Laser · 800W or 1200W
Processing modes	CNC Cutting · Laser Welding · Handheld Cutting · Rust Removal · Surface Cleaning
Max weld thickness (1200W)	5mm stainless steel / carbon steel
Max weld thickness (800W)	4mm stainless steel / carbon steel
Max CNC cut thickness (1200W)	10mm (0.39")
CNC working area	24.02" × 24.02" (610 × 610mm)
CNC max speed	400 mm/s (15.75 ips)
Motion accuracy	±0.1mm (±0.0039")
Supported materials	Stainless steel · Carbon steel · Aluminum · Brass · Titanium · Nickel alloy · Galvanized sheet · Magnesium
Camera system	Dual 16MP · AI Smart Nesting · 98.7% material utilization · 10-micron alignment
Laser lifespan	10,000+ hours · 24/7 stable output
Operating temperature	14°F to 104°F (-10°C to 40°C)
Power (1200W model)	200–240V · 21A circuit required · Max output 4,200W
Safety	Class 4 Fiber Laser · 10 safety features · SGS certified · AWS validated
Warranty	12 months

Who Is the xTool MetalFab For?

Built for Every Metal Shop. Big or Small.

Small fabrication shops Cut parts in-house instead of outsourcing. Reduce lead time from weeks to hours and cut parts costs 30–50%.

Auto body & repair shops Weld and cut panels, brackets, and custom parts with zero distortion. Faster than TIG, cleaner than MIG.

Metal artists & fabricators Create intricate art, signage, and sculptural pieces with CNC precision and laser-clean welds.

Prototyping & R&D teams From CAD to finished metal part in-house, in hours. No supplier wait times, no minimum order quantities.

DIYers & serious makers Industrial capability at a fraction of industrial cost. First clean weld in minutes — no prior training needed.

Custom product businesses Build and sell high-margin metal products — lures, parts, fixtures, signs — without outsourcing a single piece.

Replace Your Entire Metal Shop.

Weld. Cut. Clean. One fiber laser system. Built for 10,000+ hours of production.

Add to Cart →

Your cart is empty

xTool MetalFab Laser Welder/ CNC Cutter

xTool MetalFab —
Weld. Cut. Clean.
Your Entire Metal Shop in One Machine.