High Speed PETG Filament 3-Pack

3kg at $17.22/kg | 27% Off | Pick Any 3 Colors, Free USA Shipping

Three kilograms of High Speed PETG. Any 3 colors from our full range — Black, White, Crystal, and 15+ more. Vacuum-sealed per spool. Free shipping across the USA. At $17.22/kg — 27% off individual pricing — this is the smallest PETG bulk pack we offer: the lowest-commitment entry into PETG batch pricing, with enough volume to cover a focused functional parts production run in your 3 most-used colors.

High Speed PETG delivers the full functional profile of standard PETG — impact resistance, UV stability, heat tolerance to ~85°C, no enclosure required — with a reformulated melt flow that supports speeds up to 300mm/s on capable setups. Three kilograms covers weeks of production on 1–2 machines at standard speeds, or a focused high-speed run on a fast printer without restocking mid-project.

Which PETG Pack Is Right for Your Operation?

Why PETG for Functional Parts — Plain Language

Think of a water bottle. It's made of PET — the same base polymer as PETG. It flexes without cracking, survives drops, resists moisture and UV, and doesn't deform when it gets warm. PETG (glycol-modified for printability) brings those same properties to your printer without the warping and fumes of ABS.

The practical decision: PETG is what you reach for when PLA isn't tough enough but ABS is more complexity than the job requires. Parts that get handled daily, live outdoors, sit near electronics, or need to survive impact without shattering — that's PETG.

• Impact resistant without shattering — PETG bends under force and absorbs energy before failing. PLA snaps under the same stress. Enclosures, brackets, clips, outdoor hardware — PETG survives where PLA doesn't.
• Heat tolerance to ~85°C — PLA softens around 60°C. A car interior in summer, near electronics, direct sun in Florida — PLA fails, PETG holds.
• UV and moisture resistant — outdoor signage, garden fixtures, marine-adjacent components. PETG handles prolonged exposure without significant degradation.
• No enclosure required — very low shrinkage during cooling. Large flat parts stay flat. Open-frame printers print PETG reliably without the thermal management ABS demands.

Pack Contents & Value Breakdown

Print Settings for High Speed PETG

3 Common PETG Problems — Fast Fixes

Stringing between parts
Fix in order: (1) enable Wipe Before Travel and Combing mode — resolves most PETG stringing before touching hardware; (2) lower nozzle temp 5°C; (3) increase retraction 0.5mm; (4) dry the filament. Moisture is often the hidden cause of persistent stringing on a previously well-tuned profile.

Print bonding too aggressively to bed
Apply a thin glue stick layer as a release agent, drop bed temp to 80°C, and always let the bed cool fully before removal. Never pry PETG off a warm surface — you'll damage the coating.

Bubbles or foamy surface texture
Wet filament — almost always. Dry at 55–65°C for 6 hours, then load immediately into a dry box or filament dryer while printing. In humid climates, an open PETG spool can degrade noticeably within a single print session.

Storing 3 PETG Spools

• Keep sealed until the spool goes on the printer — PETG is the most moisture-sensitive common filament. Don't break the vacuum seal until you're loading the machine.
• One airtight container handles all 3 spools comfortably with room for a silica gel pack. Recharge at 120°C for 2 hours when saturated.
• Use a filament dry box while printing in coastal or humid climates — open PETG degrades faster than PLA or ABS when exposed to humidity.
• Batch consistency: all 3 spools ship from the same manufacturing batch — matched color tone and print behavior across every spool in the pack.

Who Is This 3-Pack For?

• Makers buying PETG bulk for the first time — 3kg at 27% off is the lowest-risk way to experience PETG batch pricing and confirm which colors perform best in your operation before scaling to the 6 or 10-pack.
• Makers with exactly 3 core PETG colors — if your functional parts catalog runs on black, white, and one accent (or any specific trio), this pack stocks all three in one order, one free shipping label, one manufacturing batch.
• Operations adding PETG to an existing PLA+ catalog — 3kg is a low-risk entry into functional filament production without committing to 6kg+ before knowing how much PETG demand your market generates.
• Project-specific functional part runs — a bracket series for a client build, outdoor fixtures for a specific installation, enclosures for a product launch. Three kilograms in three colors covers a focused project without overstocking a material you may not run continuously.
• High-speed printer operators on Bambu Lab, Voron, or RatRig who want HS PETG at their 3 most-used functional colors with free shipping before deciding whether to commit to a larger pack.

Browse individual spools in our PETG Filament collection. Explore everything in our 3D Printing Filaments guide.