Shining 3D Accufab-D1s Printer

Shining 3D AccuFab-D1s — Professional DLP Dental 3D Printer | 1080p Projector | Chairside & Lab

The Shining 3D AccuFab-D1s is a professional DLP dental 3D printer built on years of clinical workflow expertise. Powered by a Full HD 1080p DLP projector and a patented pixel-to-pixel distortion correction algorithm, it delivers the fine surface detail and dimensional accuracy that restorative, implant, and orthodontic applications demand — all within a compact, lab-ready footprint.

With a build volume of 144 × 81 × 160 mm and a print speed of up to 50 mm/h, the AccuFab-D1s can produce 4 arch models in under an hour and multiple surgical guides in less than 30 minutes. It is designed for dental professionals who need a dependable, high-throughput system that fits seamlessly into a digital clinical or laboratory workflow.

⚠️ Important — Read Before Printing

• Ventilation required: Operate in a well-ventilated area at all times. Photopolymer resins emit VOCs during printing.
• PPE mandatory: Always wear nitrile gloves and UV-protective eyewear when handling uncured resin.
• UV sensitivity: Shield resin bottles and the build platform from direct sunlight and ambient UV sources.
• Post-processing is required: All prints must be washed (IPA or dedicated wash station) and post-cured before any clinical use.
• Biocompatible applications: Verify that your chosen resin holds appropriate certifications (e.g., ISO 10993) for intraoral or patient contact. Resin certification is the responsibility of the user.
• Resin volume limits: Minimum 100 ml — Maximum 350 ml per tank fill. Operating outside this range may affect print quality and tank lifespan.

Patented Accuracy — Not Just High Resolution

Most DLP dental printers specify projector resolution and stop there. The AccuFab-D1s goes further with a patented pixel-to-pixel distortion correction algorithm that compensates for the optical distortion inherent in DLP projection systems — particularly at the edges of the build area where keystoning and perspective distortion are most pronounced.

The result is a print where dimensional accuracy is consistent across the entire build plate, not just at its center. For dental applications — where a margin line off by even 50 microns can compromise fit — this is the difference between a usable restoration and a remake.

Print Throughput That Matches Clinical Demand

• 4 arch models in under 1 hour — batch production for busy orthodontic and aligner workflows
• Multiple surgical guides in under 30 minutes — same-day implant planning support
• Build volume: 144 × 81 × 160 mm — sized to maximize yield per print job for the most common dental geometries
• Print speed: up to 50 mm/h — optimized for dental resin materials without sacrificing surface quality

Long-Life Resin Tank — Lower Cost Per Print

The AccuFab-D1s ships with a ceramic build platform and a resin tank rated for 100,000 layers of printing — a significant upgrade over standard FEP-film tanks that typically degrade after 15,000–20,000 layers. The ceramic platform also resists resin adhesion buildup, making cleanup faster and reducing the risk of mid-print failures caused by residue accumulation.

For high-volume labs, this translates directly to lower consumable costs and fewer workflow interruptions from tank replacements.

Intelligent Workflow — AccuWare Software

The AccuFab-D1s is powered by AccuWare, Shining 3D's purpose-built dental print preparation software. Key workflow features include:

• Intelligent support creation — automatically generates optimized supports for complex dental geometries, reducing manual setup time
• "Magic Click" one-click printing — prepares and sends the job to the printer with minimal user input, ideal for chairside environments where technician time is limited
• Wi-Fi connectivity — wireless file transfer from scanner or design workstation directly to the printer; no USB handling required
• Z-axis auto-calibration — eliminates manual bed leveling as a source of print failure

Open Material System — Shining Dent & Third-Party Resins

The AccuFab-D1s operates as an open resin system, giving dental professionals the flexibility to choose the material best suited to each clinical application. Shining 3D's own Shining Dent material line covers a broad range of dental indications, and the printer is compatible with validated third-party 405nm photopolymer resins from leading material partners.

Clinical Applications

• Dental working models and diagnostic models
• Implant surgical guides and try-in components
• Crown & bridge temporaries and try-ins
• Wax-up patterns for casting workflows
• Gingiva masks and soft tissue models
• Customized impression trays
• Indirect bonding trays and bracket transfer trays
• Orthodontic models for clear aligner thermoforming
• Splints and night guards

Technical Specifications

Print Settings Reference

Who Is This For?

The Shining 3D AccuFab-D1s is the right choice for dental professionals who need a proven, workflow-integrated DLP system with a low learning curve and a low cost of ownership over time:

• Dental labs entering digital production — a complete, ready-to-run DLP system with proprietary software, validated materials, and manufacturer support; no trial-and-error hardware tuning required
• Chairside clinics running same-day workflows — fast batch printing of arch models and surgical guides means patients get results faster without outsourcing to an external lab
• Orthodontic practices printing aligner models and indirect bonding trays in-house, where throughput and model accuracy are equally critical
• Implantologists who need consistent surgical guide accuracy and the confidence of a patented distortion-correction system behind every print
• Labs evaluating their first dental 3D printer — the AccuWare software, auto-calibration, and Magic Click one-touch printing minimize the technical barrier to entry without limiting professional capability

Ready to build a complete digital dental workflow? Explore our full resin 3D printer collection or browse all professional 3D printers available at Supplies 3D.