High Speed PETG Filament 10-Pack

10kg at $14.99/kg | 37% Off | Pick Any 10 Colors, Free USA Shipping

Ten kilograms of High Speed PETG. Any 10 colors from our full range. Vacuum-sealed per spool. Free shipping across the USA. At $14.99/kg — 37% off individual pricing — this is the PETG production entry point: enough volume for weeks of multi-machine runtime on the most capable everyday functional filament, with the flexibility to focus on your 10 highest-output colors before scaling to a larger order.

High Speed PETG delivers the full functional profile of standard PETG — impact resistance, UV stability, heat tolerance to ~85°C, no enclosure required — with a reformulated melt flow that supports speeds up to 300mm/s on capable setups. No warping headaches, no fumes, no complex setup. The workhorse material for functional parts, at production volume.

Which PETG Pack Is Right for Your Operation?

Why PETG for Functional Parts — Plain Language

Think of a water bottle. It's made of PET — the same base polymer as PETG. It flexes without cracking, survives drops, resists moisture and UV, and doesn't deform when it gets warm. PETG (glycol-modified for printability) brings those same properties to your printer without the warping and fumes of ABS.

The practical case: PETG is what you reach for when PLA isn't tough enough but ABS is more complexity than the job requires. Parts that get handled daily, live outdoors, sit near electronics, or need to survive an impact — that's PETG territory.

• Impact resistant without shattering — PETG bends under sudden force and absorbs energy before failing. PLA is stiffer but snaps under the same stress. Enclosures, brackets, clips, anything that gets knocked around belongs in PETG.
• Heat tolerance to ~85°C — PLA softens around 60°C. Florida car interior in July, near electronics, direct summer sun — PLA fails, PETG holds. Not as heat-resistant as ABS, but dramatically better than PLA for real-world warm environments.
• UV and moisture resistant — outdoor signs, garden fixtures, marine-adjacent hardware, anything exposed to weather. PETG handles prolonged UV and moisture exposure without significant degradation.
• No enclosure required — PETG has very low shrinkage during cooling. Large flat parts stay flat. Open-frame printers print PETG without the thermal management ABS demands.

Pack Contents & Value Breakdown

Print Settings for High Speed PETG

3 Common PETG Problems — Fast Fixes

Stringing between parts
Fix in order: (1) enable Wipe Before Travel and Combing mode in slicer — resolves most PETG stringing before touching hardware; (2) lower nozzle temp 5°C; (3) increase retraction 0.5mm; (4) dry the filament. Moisture is often the hidden cause of persistent stringing on an otherwise well-tuned profile.

Print bonding to bed too aggressively
PETG bonds very strongly to bare PEI and glass. Fix: apply a thin glue stick layer as a release agent before each run, drop bed temp to 80°C, and always let the bed cool fully to room temperature before attempting removal. Never pry PETG off a warm surface.

Bubbles or foamy surface texture
Wet filament — almost always. Fix: dry at 55–65°C for 6 hours, then load immediately into a dry box or filament dryer while printing. In coastal or high-humidity environments, an open PETG spool can degrade noticeably within hours.

Storing 10 PETG Spools

• Keep sealed until the spool goes on the printer — every spool ships vacuum-sealed with desiccant. PETG is the most moisture-sensitive common filament. Don't break the seal until you're loading the machine.
• Use a filament dry box while printing in coastal or humid climates. An open PETG spool on the printer in high humidity can degrade within a single print session.
• Airtight bins with rechargeable desiccant for any open spools not actively printing. Recharge silica gel packs at 120°C for 2 hours when saturated.
• Batch consistency: all 10 spools ship from the same manufacturing batch — matched color tone and print behavior across every spool. A dialed-in profile on spool 1 runs identically on spool 10.

Who Is This 10-Pack For?

• Workshops adding PETG to an existing catalog — if you've been running PLA+ as your functional material and want to add heat-resistant and outdoor-capable parts to your lineup, the 10-pack lets you stock 10 colors and assess demand before committing to 16 or 32 spools.
• Print farms validating their PETG color mix — 10 colors at production volume is enough to discover which PETG colors move fastest in your market before scaling to the 16 or 32-pack.
• Functional part producers running 2–4 machines — enclosures, brackets, outdoor components, mechanical housings — where PETG's toughness and UV resistance outperform PLA and 10kg covers weeks of production runtime.
• High-speed printer operators on Bambu Lab, Voron, or RatRig who need a PETG formulation that performs at 150–300mm/s without stringing or layer adhesion failures, at meaningful production volume.
• Etsy sellers with a functional parts catalog — drone components, plant hangers, outdoor signage, mechanical accessories — where PETG's material properties justify a premium over standard PLA items and 10kg supports weeks of batch production.

Browse individual spools in our PETG Filament collection. Explore everything in our 3D Printing Filaments guide.