{"product_id":"pro-pctg-lulzbot-green-1-75mm","title":"Pro PCTG, LulzBot Green, 1.75mm","description":"\u003ch2\u003e3D-Fuel Pro PCTG Filament — LulzBot Green (#C8CB18), 1.75mm, Up to 30× Tougher Than PETG, Chartreuse Yellow-Green, Superior Chemical Resistance, Bambu AMS Compatible, Made in USA\u003c\/h2\u003e\n\n\u003cp\u003e\n  \u003cstrong\u003e3D-Fuel Pro PCTG in LulzBot Green\u003c\/strong\u003e brings the full\n  mechanical and chemical performance of Pro PCTG in a\n  \u003cstrong\u003esaturated chartreuse yellow-green\u003c\/strong\u003e at Pantone®\n  14-0443 TPG (#C8CB18) — the same iconic color used on LulzBot\n  3D printers, bold enough to read clearly across a room and\n  distinctive enough to identify a part instantly in a mixed-color\n  build. On the Pro PCTG platform, that color comes with\n  \u003cstrong\u003eup to 30× the impact toughness of standard PETG\u003c\/strong\u003e,\n  significantly better chemical resistance across alcohols,\n  hydrocarbons, oils, and cleaning agents, lower moisture absorption\n  for easier printing in humid environments, and greater optical\n  clarity than PETG — all without requiring an enclosure.\n  If you're printing functional parts, drone components, tool\n  housings, or any build where LulzBot Green is the right color\n  and standard PETG has failed under impact or chemical exposure,\n  Pro PCTG LulzBot Green is the direct answer.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  ⚠️ \u003cstrong\u003ePrint temp is 260–280°C\u003c\/strong\u003e — higher than PETG.\n  All-metal hotend required. Verify your hotend is rated for sustained\n  use at this range before your first print.\u003cbr\u003e\n  ⚠️ \u003cstrong\u003eBed temp 70–80°C required.\u003c\/strong\u003e PEI strongly\n  recommended — PCTG bonds aggressively to bare glass and can\n  damage the surface on removal.\u003cbr\u003e\n  ✅ \u003cstrong\u003eNo enclosure needed.\u003c\/strong\u003e Near-zero warping on\n  open-frame printers.\u003cbr\u003e\n  ✅ \u003cstrong\u003eBambu AMS compatible.\u003c\/strong\u003e AMS-compliant spool\n  (Oct 2023 and later). Older warehouse stock fits AMS with\n  lid cracked a few mm.\n\u003c\/p\u003e\n\n\u003ch3\u003eLulzBot Green in the Pro PCTG Color Spectrum\u003c\/h3\u003e\n\u003cp\u003e\n  LulzBot Green occupies a unique position in the 25-color Pro PCTG\n  lineup — it is the only high-saturation yellow-green in the range,\n  sitting between the muted Olive Green and the brighter LulzBot\n  Green-adjacent tones. At #C8CB18 it reads as a warm, almost\n  acid-green chartreuse under daylight — distinctly different from\n  standard grass or forest greens, and with enough yellow in the\n  tone to contrast sharply against dark neutrals, blacks, and\n  dark grays in multi-color AMS prints.\n\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead style=\"background-color:#000000;color:#ffffff;\"\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003eHex\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003ePantone®\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003eCharacter\u003c\/strong\u003e\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGrass Green\u003c\/td\u003e\n      \u003ctd style=\"background-color:#4D9D5A;color:#fff;\"\u003e #4D9D5A\u003c\/td\u003e\n      \u003ctd\u003eP 139-8 U\u003c\/td\u003e\n      \u003ctd\u003eMid-tone natural green — cool and muted\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOlive Green\u003c\/td\u003e\n      \u003ctd style=\"background-color:#545746;color:#fff;\"\u003e #545746\u003c\/td\u003e\n      \u003ctd\u003e176-15 C\u003c\/td\u003e\n      \u003ctd\u003eDark desaturated green — military\/tactical tone\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eLulzBot Green ← this product\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd style=\"background-color:#C8CB18;color:#333;\"\u003e #C8CB18\u003c\/td\u003e\n      \u003ctd\u003e14-0443 TPG\u003c\/td\u003e\n      \u003ctd\u003eSaturated chartreuse yellow-green — bold, high-visibility\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\n  LulzBot Green in Pro PCTG is particularly effective as a\n  \u003cstrong\u003ehigh-visibility functional color\u003c\/strong\u003e — for safety\n  markings on printed tooling, identification labels on parts in\n  complex assemblies, or any application where a part needs to be\n  found quickly in a cluttered environment. It also pairs cleanly\n  with Midnight Black and Charcoal Gray in the Pro PCTG range for\n  high-contrast two-color AMS prints where the green reads as\n  the accent against a dark structural base.\n\u003c\/p\u003e\n\n\u003ch3\u003ePro PCTG Performance — Up to 30× Tougher Than PETG\u003c\/h3\u003e\n\u003cp\u003e\n  LulzBot Green carries the full Pro PCTG performance profile.\n  The toughness advantage comes from\n  \u003cstrong\u003ecyclohexane dimethanol (CHDM)\u003c\/strong\u003e in the polymer\n  backbone — a ring structure that makes the material ductile\n  under impact rather than brittle. Where standard PETG transfers\n  impact energy as crack propagation, Pro PCTG absorbs and\n  distributes it. The result is \u003cstrong\u003e20–50% higher impact\n  resistance than PETG in standard testing\u003c\/strong\u003e, and up to\n  30× improvement in drop\/shock scenarios. Combined with better\n  inter-layer bonding than PETG, Pro PCTG LulzBot Green is\n  the correct material for any functional part in this color\n  that needs to survive drops, repeated flex cycles, or\n  sustained mechanical stress.\n\u003c\/p\u003e\n\n\u003ch3\u003eChemical Resistance — Where LulzBot Green Pro PCTG Outlasts PETG\u003c\/h3\u003e\n\u003cp\u003e\n  Colored functional parts in high-visibility colors often end up\n  in environments where they see chemical exposure — IPA cleaning,\n  degreaser wipedowns, oil contact in mechanical assemblies.\n  Pro PCTG's CHDM-modified structure provides measurably better\n  resistance than PETG across all common industrial chemicals,\n  while preserving the color integrity of the LulzBot Green\n  pigment under prolonged exposure.\n\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead style=\"background-color:#000000;color:#ffffff;\"\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eChemical Type\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003eExamples\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003ePCTG Advantage\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003ePETG Limitation\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003eResistance Ratio\u003c\/strong\u003e\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAlcohols\u003c\/td\u003e\n      \u003ctd\u003eIPA, ethanol, methanol\u003c\/td\u003e\n      \u003ctd\u003eResists prolonged exposure without stress cracking\u003c\/td\u003e\n      \u003ctd\u003eStress cracks at high alcohol concentrations over time\u003c\/td\u003e\n      \u003ctd style=\"text-align:center;\"\u003e1.8×\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHydrocarbons\u003c\/td\u003e\n      \u003ctd\u003eHexane, gasoline, mineral spirits\u003c\/td\u003e\n      \u003ctd\u003eBetter resistance to hydrocarbon-based solvents\u003c\/td\u003e\n      \u003ctd\u003eSoftens or weakens on hydrocarbon exposure\u003c\/td\u003e\n      \u003ctd style=\"text-align:center;\"\u003e2.0×\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAcids\u003c\/td\u003e\n      \u003ctd\u003eAcetic acid, citric acid, phosphoric acid\u003c\/td\u003e\n      \u003ctd\u003eMaintains integrity in mild to moderate acid concentrations\u003c\/td\u003e\n      \u003ctd\u003eDegrades faster in acidic environments\u003c\/td\u003e\n      \u003ctd style=\"text-align:center;\"\u003e1.4×\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBases \/ Alkalis\u003c\/td\u003e\n      \u003ctd\u003eNaOH, KOH, ammonium hydroxide\u003c\/td\u003e\n      \u003ctd\u003eBetter resistance to strong alkalis\u003c\/td\u003e\n      \u003ctd\u003eMay crack or degrade under strong base exposure\u003c\/td\u003e\n      \u003ctd style=\"text-align:center;\"\u003e1.33×\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCleaning agents\u003c\/td\u003e\n      \u003ctd\u003eBleach, industrial degreasers, detergents\u003c\/td\u003e\n      \u003ctd\u003eWithstands harsh cleaning without discoloration or damage\u003c\/td\u003e\n      \u003ctd\u003eDiscolors or loses properties with repeated harsh cleaning\u003c\/td\u003e\n      \u003ctd style=\"text-align:center;\"\u003e1.5×\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOils and lubricants\u003c\/td\u003e\n      \u003ctd\u003eEngine oil, hydraulic fluid, cutting oil\u003c\/td\u003e\n      \u003ctd\u003eResists degradation from prolonged oil exposure\u003c\/td\u003e\n      \u003ctd\u003eAbsorbs oils over time — swelling and weakening\u003c\/td\u003e\n      \u003ctd style=\"text-align:center;\"\u003e1.6×\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eKetones\u003c\/td\u003e\n      \u003ctd\u003eAcetone, MEK\u003c\/td\u003e\n      \u003ctd\u003ePerforms better in low-concentration ketone environments\u003c\/td\u003e\n      \u003ctd\u003eSoftens or dissolves in ketone-rich environments\u003c\/td\u003e\n      \u003ctd style=\"text-align:center;\"\u003e1.2×\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eLower Moisture Absorption — More Forgiving to Print and Store\u003c\/h3\u003e\n\u003cp\u003e\n  Pro PCTG absorbs approximately \u003cstrong\u003e0.1–0.2% moisture by\n  weight\u003c\/strong\u003e — lower than PETG's ~0.2–0.3%. In practice this\n  means LulzBot Green Pro PCTG is more forgiving if you open a\n  spool and don't print immediately, more stable in humid workshop\n  environments, and less likely to produce the stringing, bubbling,\n  and surface defects that moisture causes in PETG. When drying\n  is needed: \u003cstrong\u003e60–70°C for 4–8 hours\u003c\/strong\u003e.\n\u003c\/p\u003e\n\n\u003ch3\u003ePrint Settings\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilament diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLulzBot Green — #C8CB18 \/ Pantone® 14-0443 TPG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHotend temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e260–280°C (all-metal hotend required)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70–80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended bed surface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePEI (preferred), BuildTak, WhamBam — avoid bare glass without release agent\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended print speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60–250 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo — near-zero warping on open-frame printers\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrying (when needed)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60–70°C for 4–8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMoisture absorption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~0.1–0.2% by weight (lower than PETG's ~0.2–0.3%)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpact toughness vs PETG\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20–50% higher (up to 30× in drop\/shock scenarios)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColors available in Pro PCTG\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25 Pantone®-referenced + Natural (clear)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpool weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 kg (2.2 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpool format\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAMS-compatible (Oct 2023 and later)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePackaging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVacuum sealed with desiccant packet\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of manufacture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003e\n  Pro PCTG LulzBot Green is the right choice when you need the\n  performance of Pro PCTG — impact toughness, chemical resistance,\n  low moisture absorption — in a high-visibility chartreuse\n  yellow-green that standard PETG in this color cannot match\n  mechanically. It's the correct material for safety-marked tooling\n  jigs, high-visibility drone and RC components, color-coded\n  functional parts in assemblies where green means something\n  specific, and any print where LulzBot Green needs to survive\n  the same environments that have failed standard PETG parts.\n  For multi-color AMS builds, LulzBot Green Pro PCTG pairs\n  directly with the other 24 colors in the Pro PCTG range on\n  a single shared print profile.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Documents\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n    \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/22046343945495-Pro-PCTG-Print-Profiles\" target=\"_blank\" rel=\"noopener\"\u003e\n      Pro PCTG Print Profiles — Bambu Lab and more\n    \u003c\/a\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/TDS-Essentium-PCTG.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\n      Download Technical Data Sheet (TDS) — Pro PCTG\n    \u003c\/a\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/SDS-Essentium-PCTG.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\n      Download Safety Data Sheet (SDS) — Pro PCTG\n    \u003c\/a\u003e\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\n  Browse all Pro PCTG colors at\n  \u003ca href=\"\/collections\/pctg-filament\"\u003ePCTG Filament\u003c\/a\u003e, compare\n  with \u003ca href=\"\/collections\/petg-filament\"\u003ePro PETG\u003c\/a\u003e, or explore\n  the full material catalog at\n  \u003ca href=\"\/collections\/3d-printer-filament\"\u003e3D Printer Filament\u003c\/a\u003e.\n\u003c\/p\u003e","brand":"3D-Fuel","offers":[{"title":"Pro PCTG \/ 1kg 1.75mm Spool \/ LulzBot Green","offer_id":52735619498278,"sku":"E45E7","price":29.95,"currency_code":"USD","in_stock":true},{"title":"Pro PCTG \/ 4kg 1.75mm Spool \/ LulzBot Green","offer_id":52735619531046,"sku":"E47E7","price":115.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/pro-pctg-lulzbot-green-175mm-762362.jpg?v=1773259209","url":"https:\/\/supplies3d.shop\/products\/pro-pctg-lulzbot-green-1-75mm","provider":"SUPPLIES3D","version":"1.0","type":"link"}