{"product_id":"panda-revo-hot-end-for-bambu-lab-printers-x1-and-p1-high-flow-high-speed-replaceable-nozzles","title":"Panda Revo Hot End for Bambu Lab Printers (X1 and P1) - High flow \/ High Speed \/ Replaceable Nozzles","description":"\u003ch2\u003eBIQU Panda Revo Hotend for Bambu Lab X1C, P1P and P1S — E3D RapidChange Revo Ecosystem, 40 mm³\/s, Tool-Free Nozzle Swaps\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBIQU Panda Revo\u003c\/strong\u003e is the hotend upgrade Bambu Lab X1 and P1 owners have been waiting for. Co-developed by BIQU and E3D, it replaces the stock hotend with a drop-in assembly that integrates the full \u003cstrong\u003eE3D RapidChange Revo™ ecosystem\u003c\/strong\u003e — giving you tool-free, 30-second nozzle swaps at room temperature, a high-flow rate of up to \u003cstrong\u003e40 mm³\/s\u003c\/strong\u003e, and access to the widest nozzle selection available for Bambu platform printers. No soldering. No adapters. Reuse your stock screws.\u003c\/p\u003e\n\u003cp\u003eCompatible with: \u003cstrong\u003eBambu Lab X1C, P1P, P1S.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e⚠️ \u003cstrong\u003eNot compatible with Bambu Lab X1E.\u003c\/strong\u003e The X1E uses a different hotend interface — see the E3D HTA hotend for X1E compatibility.\u003cbr\u003e⚠️ \u003cstrong\u003eNot compatible with the Revo Belt Nozzle.\u003c\/strong\u003e All other Revo™ nozzles are supported.\u003cbr\u003e⚠️ \u003cstrong\u003eHot tightening is NOT required.\u003c\/strong\u003e Nozzle changes are performed at room temperature with fingers only — do not hot tighten Revo nozzles.\u003cbr\u003e⚠️ \u003cstrong\u003eAllow hotend to cool below 50°C and power off the printer before installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 100%; height: auto;\" alt=\"BIQU Panda Revo hotend for Bambu Lab X1C P1P P1S — E3D RapidChange Revo ecosystem, ultra-high flow rate drop-in upgrade\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaRevoprductpage_1.png?v=1706864894\"\u003e\u003c\/p\u003e\n\u003ch3\u003e30-Second Tool-Free Nozzle Changes — The Core Advantage of the Revo Ecosystem\u003c\/h3\u003e\n\u003cp\u003eThe stock Bambu hotend is a sealed unit. When you need to change nozzle size, switch to a hardened nozzle for abrasive filaments, or deal with a clog, you're replacing the entire assembly. The Panda Revo eliminates this entirely. E3D's \u003cstrong\u003eRapidChange Revo™ system integrates the nozzle and heatbreak into a single sealed, self-aligning unit\u003c\/strong\u003e that twists in and out with two fingers — at room temperature, no tools, no hot tightening required. A nozzle swap that used to mean downtime and a replacement hotend order now takes 30 seconds between prints.\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 100%; height: auto;\" alt=\"BIQU Panda Revo tool-free nozzle swap — E3D RapidChange Revo nozzle system, 30 second change at room temperature\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaRevoprductpage_2.png?v=1706865143\"\u003e\u003c\/p\u003e\n\u003ch3\u003e60W E3D HeaterCore — Faster Heating, Higher Flow, PTC Safety\u003c\/h3\u003e\n\u003cp\u003eThe Panda Revo ships with a \u003cstrong\u003ecustom 60W E3D HeaterCore\u003c\/strong\u003e — significantly more powerful than the stock Bambu heater — which enables the hotend to sustain high temperatures during fast, high-flow printing without thermal sagging or lag. The HeaterCore uses a \u003cstrong\u003ePositive Temperature Coefficient (PTC) design\u003c\/strong\u003e, meaning it self-regulates: as it approaches its target temperature, resistance increases and power draw drops naturally, reducing the risk of thermal runaway. Combined with the included \u003cstrong\u003eNTC100k thermistor\u003c\/strong\u003e, the Panda Revo delivers faster heat-up times and more stable extrusion temperatures across the full print session.\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 100%; height: auto;\" alt=\"BIQU Panda Revo 60W E3D HeaterCore with NTC100k thermistor — faster heat-up and stable extrusion for Bambu Lab X1C P1P P1S\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaRevoprductpage_3.png?v=1706865298\"\u003e\u003c\/p\u003e\n\u003ch3\u003e40 mm³\/s Flow Rate — Unlock the True Speed of Your Bambu Printer\u003c\/h3\u003e\n\u003cp\u003eThe included \u003cstrong\u003e0.4mm Revo™ High Flow (HF) nozzle\u003c\/strong\u003e is rated for up to \u003cstrong\u003e40 mm³\/s\u003c\/strong\u003e — a significant jump over the stock hotend's volumetric ceiling. For slicer configuration, set \u003cem\u003eMax Volumetric Speed\u003c\/em\u003e under Filament settings to \u003cstrong\u003e35–40 mm³\/s\u003c\/strong\u003e depending on your material. If you see signs of under-extrusion, lower the value incrementally until quality is restored. This headroom is what allows your Bambu's CoreXY motion system to run at its rated speeds without the hotend becoming the bottleneck on demanding prints.\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 100%; height: auto;\" alt=\"BIQU Panda Revo flow rate chart — up to 40mm³\/s with 0.4mm E3D Revo HF nozzle on Bambu Lab X1C P1P\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaRevoprductpage_4.png?v=1706865318\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFactory-Sealed Revo Nozzles — Zero Leaks by Design\u003c\/h3\u003e\n\u003cp\u003eStandard hotends rely on tight torque between nozzle and heatblock to create a leak-free seal — which is exactly why hot tightening exists and why leaks happen when it's skipped or over-torqued. Revo nozzles work differently. The nozzle and heatbreak form a \u003cstrong\u003efactory-sealed, self-aligning assembly\u003c\/strong\u003e where the seal is created by the geometry of the parts, not by torque. The result is a consistently leak-proof joint every time, regardless of who installs it or how many times it's been swapped.\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 100%; height: auto;\" alt=\"E3D Revo nozzle factory-sealed leak-proof design — self-aligning nozzle heatbreak assembly for BIQU Panda Revo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaRevoprductpage_5.png?v=1706865334\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFull Revo™ Nozzle Ecosystem Compatibility\u003c\/h3\u003e\n\u003cp\u003eOnce you're on the Panda Revo, your nozzle choices expand dramatically. The entire \u003cstrong\u003eE3D RapidChange Revo™ nozzle lineup\u003c\/strong\u003e is directly compatible — brass, hardened steel, ObXidian high-flow, and more — all swappable in 30 seconds without tools. Switch from a 0.4mm brass nozzle for PLA to a hardened 0.6mm for carbon fiber-filled materials between prints. The only exception is the Revo Belt Nozzle, which is not compatible with this hotend.\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 100%; height: auto;\" alt=\"E3D RapidChange Revo nozzle ecosystem — brass, hardened steel, ObXidian nozzles compatible with BIQU Panda Revo Bambu hotend\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaRevoprductpage_6.png?v=1706865357\"\u003e\u003c\/p\u003e\n\u003ch3\u003eDrop-In Installation — No Adapters, No Mounts, No Modifications\u003c\/h3\u003e\n\u003cp\u003eThe Panda Revo is designed to be a direct replacement for the stock Bambu hotend assembly. It reuses your existing printer screws — no additional mounting hardware, no 3D printed adapters, no wiring modifications. Installation takes a few minutes following the included QR code instructions or the video guide below. The heatsink fan from your stock hotend transfers directly to the Panda Revo.\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 100%; height: auto;\" alt=\"BIQU Panda Revo drop-in installation for Bambu Lab X1C P1P P1S — no adapters, reuse stock screws\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/PandaRevoprductpage_7.png?v=1706865381\"\u003e\u003c\/p\u003e\n\u003ch3\u003eInstallation Guide\u003c\/h3\u003e\n\u003cp\u003e\u003cimg style=\"width: 100%; height: auto;\" alt=\"BIQU Panda Revo installation steps for Bambu Lab X1C — hotend removal and mounting procedure\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/lALPGT5jK1fc1yHNAyHNAaQ_420_801_480x480.png?v=1707212765\"\u003e \u003cimg style=\"width: 100%; height: auto;\" alt=\"BIQU Panda Revo wiring and cable routing guide for Bambu Lab P1P P1S installation\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1619\/4791\/files\/lALPGSyfsh_3MDDNAb7M-w_251_446.png?v=1707212802\"\u003e\u003c\/p\u003e\n\u003cp\u003eFull installation video by LeeMerie3D:\u003c\/p\u003e\n\u003cp\u003e\u003ciframe style=\"width: 100%; height: auto; aspect-ratio: 16\/9;\" height=\"480\" width=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/KVnLgYRYKtg?si=jcUtuEZGewAzPjeH\" title=\"BIQU Panda Revo hotend install on Bambu Lab X1 and P1 — by LeeMerie3D\"\u003e\n\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBIQU × E3D (co-developed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePanda Revo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible printers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBambu Lab X1C, P1P, P1S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNOT compatible with\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBambu Lab X1E, A1, A1 Mini\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax flow rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 40 mm³\/s (with 0.4mm Revo HF nozzle, HS PLA at 260°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIncluded nozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4mm E3D Revo™ High Flow (HF) — brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle system\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eE3D RapidChange Revo™ — tool-free, room temperature swap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll Revo™ nozzles except Revo Belt Nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeater\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eE3D HeaterCore — 60W, 24V, PTC design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThermistor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNTC100k\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHotend length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e47.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDrop-in, reuse stock screws — no adapters required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHot tightening\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot required — never hot tighten Revo nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e✅\u003c\/td\u003e\n\u003ctd\u003ePanda Revo hotend assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e✅\u003c\/td\u003e\n\u003ctd\u003e1× 0.4mm E3D Revo™ High Flow nozzle (pre-installed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e✅\u003c\/td\u003e\n\u003ctd\u003e60W E3D HeaterCore (installed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e✅\u003c\/td\u003e\n\u003ctd\u003eNTC100k thermistor (installed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e✅\u003c\/td\u003e\n\u003ctd\u003eQR code installation instruction card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's NOT Included\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e❌\u003c\/td\u003e\n\u003ctd\u003eHeatsink cooling fan — transfer from your stock Bambu hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e❌\u003c\/td\u003e\n\u003ctd\u003eAdditional Revo nozzles — purchased separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhen Do You Need This?\u003c\/h3\u003e\n\u003cp\u003eThe Panda Revo is the right upgrade if you're regularly swapping nozzles — or wish you could without a 20-minute teardown. It's also the correct move when you've pushed your Bambu to its speed limits and the stock hotend is throttling your volumetric output. And if you've ever had a stock hotend clog force a full replacement, the Panda Revo pays for itself the first time a nozzle swap saves you a hotend order. For anyone printing a variety of materials — standard PLA one day, abrasive CF-nylon the next — the Revo nozzle ecosystem makes material-specific nozzle management practical for the first time on a Bambu platform.\u003c\/p\u003e\n\u003ch3\u003eSlicer Configuration Note\u003c\/h3\u003e\n\u003cp\u003eIn Bambu Studio or Orca Slicer, navigate to \u003cstrong\u003eFilament settings → Max Volumetric Speed\u003c\/strong\u003e and set it to \u003cstrong\u003e35–40 mm³\/s\u003c\/strong\u003e depending on your filament. Start at 35 mm³\/s and increase if quality allows. For detailed per-filament settings, refer to the \u003ca rel=\"noopener\" href=\"https:\/\/e3d-online.zendesk.com\/hc\/en-us\/articles\/4777443097757-Filament-Starter-Settings\" target=\"_blank\"\u003e E3D filament starter settings guide \u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eBrowse our full hotend selection at \u003ca href=\"\/collections\/3d-printer-hotends\"\u003e3D Printer Hotends\u003c\/a\u003e, or explore all Bambu Lab compatible upgrades at \u003ca href=\"\/collections\/3d-printer-upgrades\"\u003e3D Printer Upgrades\u003c\/a\u003e.\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"X1","offer_id":52735673270566,"sku":"BTT2252X1","price":99.99,"currency_code":"USD","in_stock":true},{"title":"P1","offer_id":52735673303334,"sku":"BTT2253P1","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/panda-revo-hot-end-for-bambu-lab-printers-x1-and-p1-high-flow-high-speed-replaceable-nozzles-west3d-3d-printing-supplies-btt-993626.webp?v=1773259452","url":"https:\/\/supplies3d.shop\/products\/panda-revo-hot-end-for-bambu-lab-printers-x1-and-p1-high-flow-high-speed-replaceable-nozzles","provider":"SUPPLIES3D","version":"1.0","type":"link"}