{"product_id":"jabberwocky-complete-toolhead-with-filament-cutter-and-extruder-for-3d-printers-and-multi-filament-setups","title":"Jabberwocky Complete Toolhead with Filament Cutter and Extruder for 3D printers and Multi-Filament setups","description":"\u003ch2\u003eJabberwocky Complete Toolhead — Filament Cutter, Bondtech Extruder, Phaetus Conch 35 mm³\/s, Nitehawk 36, for Multi-Material FCU Systems\u003c\/h2\u003e\n\n\u003cp\u003e\n  The \u003cstrong\u003eJabberwocky\u003c\/strong\u003e is a purpose-engineered toolhead for\n  \u003cstrong\u003eFilament Changing Units (FCUs) and multi-material 3D printing\u003c\/strong\u003e —\n  designed from the ground up to handle the mechanical demands that destroy\n  conventional toolheads in multi-color setups: thousands of load\/unload cycles,\n  precise filament positioning for clean cuts, and consistent high-flow extrusion\n  through rapid material transitions. It integrates a\n  \u003cstrong\u003eBondtech compound drive extruder\u003c\/strong\u003e, \u003cstrong\u003ePhaetus Conch hotend\n  at 35 mm³\/s\u003c\/strong\u003e, \u003cstrong\u003eintegrated filament cutter with full-length blades\u003c\/strong\u003e,\n  \u003cstrong\u003edual sensor filament detection\u003c\/strong\u003e, \u003cstrong\u003eNitehawk 36 toolboard\u003c\/strong\u003e,\n  and \u003cstrong\u003ehigh-static-pressure dual 3010 cooling fans\u003c\/strong\u003e — all in a single\n  toolhead designed by kinematicdigit with LDO Motors backing.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  Available in three configurations — \u003cstrong\u003eAssembled\u003c\/strong\u003e, \u003cstrong\u003eKit\n  (Standard\/DIY)\u003c\/strong\u003e, and \u003cstrong\u003eBasic\u003c\/strong\u003e.\n  Choose based on your preference and what you already have.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  ⚠️ \u003cstrong\u003ePrinted mounting plate required for all versions.\u003c\/strong\u003e\n  The Jabberwocky mounts to your printer via a printed adapter plate specific to\n  your machine. Print this before installation. STL files on the\n  \u003ca href=\"https:\/\/github.com\/kinematicdigit\/Jabberwocky\" target=\"_blank\" rel=\"noopener\"\u003e\n    Jabberwocky GitHub\n  \u003c\/a\u003e.\u003cbr\u003e\n  ⚠️ \u003cstrong\u003eBasic version does NOT include Nitehawk 36 or Phaetus Conch hotend.\u003c\/strong\u003e\n  It includes hardware, BMG kit, motor, cutter, LEDs, and fans only.\u003cbr\u003e\n  ⚠️ \u003cstrong\u003ePrinted parts are NOT included with Kit or Basic versions.\u003c\/strong\u003e\n  Only the fully Assembled version ships with printed parts. Download STLs from GitHub\n  and print before building.\u003cbr\u003e\n  ⚠️ \u003cstrong\u003eStand not included\u003c\/strong\u003e in any version.\n\u003c\/p\u003e\n\n\u003ch3\u003eBuilt for FCUs — Why Standard Toolheads Fail at Multi-Material\u003c\/h3\u003e\n\u003cp\u003e\n  A standard extruder and toolhead is designed around the assumption that filament\n  loads once and runs to completion. Filament Changing Units break that assumption\n  violently: the extruder loads, drives, reverses, unloads, and reloads on every\n  color change — potentially hundreds of times in a single print. Conventional\n  gear designs weren't optimized for this cycle pattern and develop inconsistency\n  over time. The Jabberwocky addresses FCU demands at the design level:\n  a \u003cstrong\u003eBondtech compound drive gear in an offset configuration\u003c\/strong\u003e paired\n  with \u003cstrong\u003edual LDO non-threaded Orbiter gears\u003c\/strong\u003e maximizes filament\n  surface contact and distributes load across the gear set — delivering the torque\n  needed for reliable loading and the speed needed for fast unloading without\n  the slip or grinding that accelerates wear on conventional designs.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated Filament Cutter — Clean Cuts for Clean Transitions\u003c\/h3\u003e\n\u003cp\u003e\n  The filament cutter is not an add-on — it's integrated into the Jabberwocky's\n  architecture from the start. \u003cstrong\u003eFull-length blades with support bearings\u003c\/strong\u003e\n  ensure the cut is clean and consistent every time, which matters enormously\n  for multi-material print quality: a ragged filament tip entering the hotend\n  during a load sequence causes jams, color contamination, and failed transitions.\n  The integrated \u003cstrong\u003ecable strain relief\u003c\/strong\u003e keeps the cutter's wiring\n  managed cleanly through the toolhead's cable routing.\n\u003c\/p\u003e\n\n\u003ch3\u003ePhaetus Conch Hotend — 35 mm³\/s High Flow\u003c\/h3\u003e\n\u003cp\u003e\n  The Phaetus Conch is the hotend that ships in the Jabberwocky Standard and\n  Assembled versions — a high-flow hotend rated to \u003cstrong\u003e35 mm³\/s\u003c\/strong\u003e\n  that maintains consistent extrusion through the rapid temperature changes and\n  varying material properties that multi-material printing demands. The Conch's\n  high-flow geometry means the melt zone keeps up with fast print speeds\n  between color changes, not just during them — so the time you save on fast\n  transitions doesn't get lost to under-extrusion in the print itself.\n\u003c\/p\u003e\n\n\u003ch3\u003eNitehawk 36 Toolboard — USB Klipper, No CAN Complexity\u003c\/h3\u003e\n\u003cp\u003e\n  The Nitehawk 36 manages all toolhead electronics: \u003cstrong\u003eRP2040 MCU,\n  TMC2209 stepper driver, ADXL345 accelerometer\u003c\/strong\u003e for input shaper\n  calibration, and \u003cstrong\u003eUSB communication\u003c\/strong\u003e to your Klipper host.\n  No CAN setup, no additional software, no bus configuration — just 24V power\n  and a USB cable from the host. The onboard accelerometer means you can run\n  input shaper directly from the toolhead without any additional hardware,\n  and the secondary USB port lets you connect a nozzle camera or eddy current\n  probe without adding another umbilical run.\n\u003c\/p\u003e\n\n\u003ch3\u003eDual Sensor Filament Array — Two-Point Detection\u003c\/h3\u003e\n\u003cp\u003e\n  Two independent filament sensors give the Jabberwocky positional awareness\n  of the filament at two points in the feed path. This is more than a simple\n  runout sensor — dual detection enables more reliable positioning feedback\n  during the load\/unload cycles that define FCU operation. The status LED\n  provides visual confirmation of filament state at the toolhead without\n  needing to check a screen.\n\u003c\/p\u003e\n\n\u003ch3\u003eTool-Free Hinged Extruder — Service Without Disassembly\u003c\/h3\u003e\n\u003cp\u003e\n  Multi-material printing is hard on extruders. When you need to clear a jam,\n  inspect the gears, or access the filament path, a conventional extruder\n  requires partial disassembly. The Jabberwocky's \u003cstrong\u003ehinged extruder\n  mechanism opens tool-free\u003c\/strong\u003e — no screws to remove, no parts to set\n  aside. Open, clear, close. This design choice directly reduces the time\n  cost of maintenance in a printing workflow that requires more of it than\n  single-material printing.\n\u003c\/p\u003e\n\n\u003ch3\u003eDual High-Static-Pressure 3010 Fans — Cooling That Reaches the Print\u003c\/h3\u003e\n\u003cp\u003e\n  The Jabberwocky uses \u003cstrong\u003edual 3010 high-static-pressure part cooling\n  fans\u003c\/strong\u003e rather than a single large blower — directing airflow precisely\n  to the print zone from two sides. High static pressure ensures the airflow\n  penetrates to the layer surface even at high print speeds and through complex\n  geometry where a standard fan's airflow would stall. A dedicated\n  \u003cstrong\u003ehigh-static-pressure 2510 hotend fan\u003c\/strong\u003e handles heatsink\n  cooling independently.\n\u003c\/p\u003e\n\n\u003ch3\u003eWhich Version Is Right for You?\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003eAssembled\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003eKit (Standard\/DIY)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003eBasic\u003c\/strong\u003e\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eAssembly required\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eNone — ready to mount\u003c\/td\u003e\n      \u003ctd\u003eFull build\u003c\/td\u003e\n      \u003ctd\u003eFull build\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePrinted parts included\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e✅ Yes\u003c\/td\u003e\n      \u003ctd\u003e❌ Print from GitHub\u003c\/td\u003e\n      \u003ctd\u003e❌ Print from GitHub\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePhaetus Conch hotend\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e✅ Included\u003c\/td\u003e\n      \u003ctd\u003e✅ Included\u003c\/td\u003e\n      \u003ctd\u003e❌ Not included\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eNitehawk 36 toolboard\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e✅ Included\u003c\/td\u003e\n      \u003ctd\u003e✅ Included\u003c\/td\u003e\n      \u003ctd\u003e❌ Not included\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMotor, gears, cutter, fans, LEDs\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e✅\u003c\/td\u003e\n      \u003ctd\u003e✅\u003c\/td\u003e\n      \u003ctd\u003e✅\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eBest for\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFastest path to printing\u003c\/td\u003e\n      \u003ctd\u003eBuilders who want to assemble\u003c\/td\u003e\n      \u003ctd\u003eUsers sourcing own hotend\/PCB\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesigned by\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ekinematicdigit × LDO Motors\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrimary application\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFilament Changing Units (FCUs), multi-material printing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePhaetus Conch — up to 35 mm³\/s (Standard and Assembled)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtruder drive\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBondtech compound drive gear, offset config + dual LDO non-threaded Orbiter gears\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtruder motor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLDO NEMA14 8T 36mm stepper\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eToolboard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNitehawk 36 (RP2040, TMC2209, ADXL345, USB) — Standard and Assembled\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart cooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2× 3010 high-static-pressure fans\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHotend cooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1× 2510 high-static-pressure fan\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilament cutter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIntegrated — full-length blades, support bearings, cable strain relief\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilament detection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual sensor array\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStatus indicators\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStatus LED + dual nozzle LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtruder access\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTool-free hinged mechanism\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eKlipper connection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB (via Nitehawk 36 + umbilical cable)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrinter-specific printed plate required — STLs on GitHub\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n    \u003ca href=\"https:\/\/github.com\/kinematicdigit\/Jabberwocky\" target=\"_blank\" rel=\"noopener\"\u003e\n      Jabberwocky GitHub — STLs, assembly wiki, BOM, compatibility list, Discord\n    \u003c\/a\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003ca href=\"https:\/\/docs.ldomotors.com\/en\/Toolboard\/nitehawk-36\" target=\"_blank\" rel=\"noopener\"\u003e\n      LDO Nitehawk 36 Documentation — Klipper config, wiring, firmware\n    \u003c\/a\u003e\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\n  Browse our full toolhead and extruder selection at\n  \u003ca href=\"\/collections\/3d-printer-extruders\"\u003e3D Printer Extruders\u003c\/a\u003e, or explore all\n  Nitehawk-compatible electronics at\n  \u003ca href=\"\/collections\/3d-printer-electronics\"\u003e3D Printer Electronics\u003c\/a\u003e.\n\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Non-Assembled (you print your own parts and build)","offer_id":52735668093222,"sku":"LDO2803NON-1","price":139.99,"currency_code":"USD","in_stock":true},{"title":"Assembled","offer_id":52735668125990,"sku":"LDO2803NON-2","price":153.99,"currency_code":"USD","in_stock":false},{"title":"Basic","offer_id":52735668158758,"sku":"LDO2874BASBAT","price":63.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/jabberwocky-complete-toolhead-with-filament-cutter-and-extruder-for-3d-printers-and-multi-filament-setups-west3d-3d-printing-supplies-ldo-systems-850376.jpg?v=1773259447","url":"https:\/\/supplies3d.shop\/products\/jabberwocky-complete-toolhead-with-filament-cutter-and-extruder-for-3d-printers-and-multi-filament-setups","provider":"SUPPLIES3D","version":"1.0","type":"link"}