{"product_id":"carbonx-ezpc-polycarbonate-3d-printer-filament-by-3dxtech-made-in-usa-750g","title":"CarbonX ezPC Polycarbonate 3D Printer Filament by 3DXTech Made in USA 750g","description":"\u003ch2\u003e3DXTech ezPC Polycarbonate Filament — 1.75mm, 750g, Tg 118°C \/ HDT 112°C, No Enclosure Required, AMS Compatible, No-Odor Engineering PC, Made in USA\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e3DXTech ezPC Polycarbonate\u003c\/strong\u003e is the polycarbonate filament engineered for the real world — not the industrial oven. Where standard polycarbonate requires a heated chamber, extreme temperatures, and extensive bed preparation, ezPC was formulated specifically to print on a wide array of open-frame desktop printers without a heated chamber, without hazardous fumes, and without the warping behavior that makes conventional PC impractical outside of professional enclosures. The result is a material that sits precisely between the commodity tier (PLA, PETG, ABS, ASA) and the ultra-performance tier (Ultem, PEEK) — delivering \u003cstrong\u003eTg of 118°C and HDT of 112°C\u003c\/strong\u003e, outstanding impact resistance, and low warpage, at a price and printability level that puts true engineering-grade PC within reach on any capable FDM machine. Manufactured in 3DXTech's 68,000 ft² facility in Grand Rapids, Michigan. ISO 9001:2015 certified.\u003c\/p\u003e\n\u003cp\u003e⚠️ \u003cstrong\u003eNo cooling fan.\u003c\/strong\u003e Run 0% part cooling fan throughout the entire print. Fan cooling causes PC to warp and delaminate — this is the single most common cause of ezPC print failures.\u003cbr\u003e⚠️ \u003cstrong\u003eDry before printing: 80°C for 4+ hours.\u003c\/strong\u003e Polycarbonate is highly hygroscopic. Moisture causes bubbling, stringing, and poor layer adhesion. Use a filament dryer or oven and keep the spool in a dry box while printing.\u003cbr\u003e⚠️ \u003cstrong\u003eAll-metal hotend required\u003c\/strong\u003e — 255–275°C exceeds the safe operating range of PTFE-lined hotends. Verify your hotend is all-metal before your first print.\u003cbr\u003e⚠️ \u003cstrong\u003eAdhesive recommended on print bed.\u003c\/strong\u003e Despite ezPC's improved adhesion vs. standard PC, a thin layer of adhesive (glue stick, Magigoo PC, or equivalent) on a PEI or glass surface is strongly recommended to prevent warping on large prints.\u003cbr\u003e✅ \u003cstrong\u003eNo enclosure required\u003c\/strong\u003e — ezPC's low-warp formulation prints successfully on open-frame printers where standard PC would fail.\u003cbr\u003e✅ \u003cstrong\u003e750g spool fits Bambu AMS, Creality CFS, and Anycubic ACE Pro\u003c\/strong\u003e for multi-material setups.\u003c\/p\u003e\n\u003ch3\u003eTg 118°C \/ HDT 112°C — Where This Sits in the Material Hierarchy\u003c\/h3\u003e\n\u003cp\u003eThe two numbers that define ezPC's thermal ceiling are \u003cstrong\u003eglass transition temperature (Tg) of 118°C\u003c\/strong\u003e and \u003cstrong\u003eheat deflection temperature (HDT) of 112°C\u003c\/strong\u003e. To put this in practical context: standard PLA begins deforming around 55–60°C. PETG around 70–80°C. ABS around 95–100°C. ASA around 95–100°C. ezPC holds its geometry at 112°C under load — covering automotive interior temperatures, industrial enclosures, outdoor electronics housings, and any environment where the materials below it on this list have failed. This is not a theoretical spec: it is the operating range that makes polycarbonate the default choice for automotive lighting, riot shields, and aircraft interior panels in injection-molded form, now accessible in an FDM-printable formulation that doesn't require a $10,000 industrial printer to run.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead style=\"background-color: #000000; color: #ffffff;\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTg \/ HDT (approximate)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure required?\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eOdor \/ fumes?\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePLA\u003c\/td\u003e\n\u003ctd\u003e~55–60°C\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eMinimal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePETG\u003c\/td\u003e\n\u003ctd\u003e~70–80°C\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eLow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003ctd\u003e~95–100°C\u003c\/td\u003e\n\u003ctd\u003eYes (recommended)\u003c\/td\u003e\n\u003ctd\u003eModerate — styrene fumes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eASA\u003c\/td\u003e\n\u003ctd\u003e~95–100°C\u003c\/td\u003e\n\u003ctd\u003eYes (recommended)\u003c\/td\u003e\n\u003ctd\u003eModerate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eezPC (this product)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTg 118°C \/ HDT 112°C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNone \/ no hazardous fumes\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltem \/ PEEK\u003c\/td\u003e\n\u003ctd\u003e170–250°C+\u003c\/td\u003e\n\u003ctd\u003eYes — required\u003c\/td\u003e\n\u003ctd\u003eLow but printer-intensive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eezPC delivers ABS-surpassing thermal performance without ABS's enclosure requirement and styrene fume output — making it the correct upgrade path for home and office environments where ABS is impractical but PLA\/PETG are thermally insufficient.\u003c\/p\u003e\n\u003ch3\u003eLow Warp + No Enclosure — Why ezPC Prints Differently From Standard PC\u003c\/h3\u003e\n\u003cp\u003eStandard polycarbonate's printability problems are well-documented: extreme warping, layer delamination, stringent enclosure and temperature requirements, and sensitivity to any deviation from optimal settings. ezPC addresses these at the formulation level — the polymer was developed specifically for 3D printing, not adapted from an injection molding grade. The result is a PC that prints successfully on open-frame printers at 255–275°C hotend \/ 90–110°C bed with no enclosure required and no hazardous fumes. The key operational difference from standard PC: \u003cstrong\u003eno part cooling fan\u003c\/strong\u003e. PC requires slow, controlled cooling to maintain layer adhesion — any forced airflow from a part cooling fan causes warping and delamination. Zero fan, every layer.\u003c\/p\u003e\n\u003ch3\u003eAquaTek X1 USM Water-Soluble Support Compatibility\u003c\/h3\u003e\n\u003cp\u003eezPC adheres exceptionally well to \u003cstrong\u003e3DXTech AquaTek X1 USM\u003c\/strong\u003e water-soluble support filament, enabling dual-extrusion prints with complex overhangs, internal channels, and interlocking geometry that would be impossible or impractical to support with breakaway materials. AquaTek X1 dissolves in warm water and is bio-safe for home or office drain disposal — making support removal for engineering-grade PC parts as simple as a water soak.\u003c\/p\u003e\n\u003ch3\u003ePrint Settings\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilament diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiameter tolerance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e±0.05mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHotend temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e255–275°C (all-metal hotend required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e90–110°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart cooling fan\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e⚠️ NO FAN — 0% at all times\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrint speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40–60 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBed preparation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAdhesive recommended (glue stick, Magigoo PC, or PEI + adhesive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeated chamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot required — open-frame compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupport material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAquaTek X1 USM (water-soluble, dual extrusion)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDrying before printing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80°C for 4+ hours — required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGlass transition temperature (Tg)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e118°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeat deflection temperature (HDT)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e112°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpool weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e750g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAMS \/ CFS \/ ACE Pro compatible\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes — 750g spool fits all three systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of manufacture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA — Grand Rapids, Michigan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuality certification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eISO 9001:2015\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eezPC is the correct material when your functional parts are operating in thermal or mechanical conditions that PLA, PETG, ABS, or ASA cannot sustain — and you don't want or need the complexity of Ultem or PEEK. Specific applications where ezPC outperforms every commodity filament: automotive interior brackets and housings that see direct sunlight through glass (80–110°C surface temperatures), outdoor electronics enclosures in summer climates, industrial tooling jigs in heated environments, sterilizable medical device prototypes, electrical components near heat sources, and any structural part that has previously failed from heat deformation in a vehicle or warm enclosure. If you've been tolerating ABS to get heat resistance and fighting the enclosure and fume requirements — ezPC gives you better thermal performance on an open-frame printer with no hazardous fumes.\u003c\/p\u003e\n\u003ch3\u003eTechnical Documents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0625\/4185\/6821\/files\/ezpc_tds_UN_ezPC_v01.pdf?v=1728334785\" target=\"_blank\"\u003e Download Technical Data Sheet (TDS) — ezPC Polycarbonate \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0625\/4185\/6821\/files\/ezpc_sds_ezPC_SDS_v1.1.pdf?v=1728334784\" target=\"_blank\"\u003e Download Safety Data Sheet (SDS) — ezPC Polycarbonate \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/github.com\/3dxtech\/slicer-profiles\" target=\"_blank\"\u003e 3DXTech Slicer Profiles on GitHub — community-maintained profiles by printer model \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"position: relative; width: 100%; aspect-ratio: 16\/9;\"\u003e\u003ciframe title=\"3DXTech ezPC Polycarbonate — printing guide\" src=\"https:\/\/www.youtube.com\/embed\/KFLW48B5NQU?si=kunHDYRvdqBV132j\" style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\"\u003e\n  \u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eBrowse all engineering-grade filaments at \u003ca href=\"\/collections\/3d-printer-filament\"\u003e3D Printer Filament\u003c\/a\u003e.\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Black","offer_id":52735673336102,"sku":"PC005UN100750BK01","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/carbonx-ezpc-polycarbonate-3d-printer-filament-by-3dxtech-made-in-usa-750g-west3d-3d-printing-supplies-3dxtech-573659.webp?v=1773259452","url":"https:\/\/supplies3d.shop\/products\/carbonx-ezpc-polycarbonate-3d-printer-filament-by-3dxtech-made-in-usa-750g","provider":"SUPPLIES3D","version":"1.0","type":"link"}