{"product_id":"20-x-1kg-premium-pla-mix-and-match","title":"PLA+ Filament 20-Pack Mix and Match","description":"\u003ch2\u003ePLA+ Filament 20-Pack — 20kg at $11.48\/kg | 42% Off | Pick Your 20 Best Colors, Free USA Shipping\u003c\/h2\u003e\n\n\u003cp\u003e\n  Twenty kilograms of premium PLA+. Any 20 colors from our full range of 30+\n  options. Vacuum-sealed per spool. Free shipping across the USA. At $11.48\/kg —\n  42% off individual pricing — this is the workshop-scale pack: enough volume\n  to keep multiple machines running for weeks, with the flexibility to focus\n  on the 20 colors that actually move in your operation.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  This is standard PLA+ — not a high-speed formulation. It's the right choice\n  for workshops, makerspaces, schools, and production operations running at\n  standard speeds (40–80mm\/s) that want deep bulk pricing without committing\n  to a full 30-color catalog order. Pick your best-sellers, stock them deep,\n  and reorder what runs out.\n\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhy 20 Spools — The Strategic Middle Ground\u003c\/h3\u003e\n\n\u003cp\u003e\n  The 30-pack is for stocking the entire color range. The 20-pack is for\n  something different: \u003cstrong\u003estocking deep on the colors that drive\n  your revenue.\u003c\/strong\u003e\n\u003c\/p\u003e\n\n\u003cp\u003e\n  Most print operations follow a pattern — a handful of colors (black, white,\n  gray, a few accent colors) account for 70–80% of print volume. Stocking\n  5 spools each of your top 4 colors and 1 spool each of 10 secondary colors\n  is smarter than spreading 30 spools evenly across a catalog you don't fully\n  use. The 20-pack gives you the volume and the pricing to build that strategy.\n\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eGo deep on your core colors\u003c\/strong\u003e — order 3–5 spools of black,\n    white, and your two best-selling accent colors. Never run out of a revenue\n    driver mid-production.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eSample new colors without full commitment\u003c\/strong\u003e — use 5–8 of\n    your 20 slots to try colors you haven't stocked before, at bulk pricing\n    rather than individual spool cost.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eSeasonal flexibility\u003c\/strong\u003e — rotate your 20-slot selection\n    order to order based on what's selling. Holiday colors in Q4, pastels\n    in spring, back-to-school in August.\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhat PLA+ Is — and Why It's the Default for Production\u003c\/h3\u003e\n\n\u003cp\u003e\n  Standard PLA is the easiest filament to print but has a mechanical ceiling —\n  it can be brittle, cracks under sudden impact, and degrades in toughness over\n  months. PLA+ addresses those limits with a tougher formulation while keeping\n  everything that makes PLA the default choice for high-volume operations.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  Think of it like the difference between a styrofoam cup and a polypropylene\n  cup. Same basic category — \"a cup\" — but one crumbles the moment you grip\n  it too hard and the other flexes, holds, and survives being dropped. PLA+\n  is the polypropylene cup.\n\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eImpact resistant\u003c\/strong\u003e — flexes under force instead of snapping.\n    Parts survive handling, shipping, and customer use without cracking.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eStronger layer bonding\u003c\/strong\u003e — tighter interlayer adhesion means\n    stronger parts at the same infill settings, without increasing print time.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eLonger shelf life in use\u003c\/strong\u003e — maintains toughness better than\n    standard PLA, which becomes brittle over months of display or use.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eSame ease of printing\u003c\/strong\u003e — same temperatures, same settings,\n    no enclosure, no special hardware. Drop standard PLA profiles in and go.\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003ePack Contents \u0026amp; Value Breakdown\u003c\/h3\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpec\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePack size\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e20 × 1kg spools (20kg total \/ 44.0 lbs)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003ePLA+ (standard formulation)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eFilament diameter\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1.75mm ±0.02mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eColor selection\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eAny 20 colors from our full PLA+ range (30+ options)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePrice per kg\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e$11.48 (42% off individual spool pricing)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePackaging\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eVacuum-sealed with desiccant — each spool individually sealed\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eShipping\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFree across the USA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003ePrint Settings for PLA+\u003c\/h3\u003e\n\n\u003cp\u003e\n  PLA+ is the most forgiving material in FDM. These settings work as a\n  reliable production baseline across virtually all printers and operators —\n  beginner or experienced.\n\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSetting\u003c\/th\u003e\n      \u003cth\u003eRecommended Range\u003c\/th\u003e\n      \u003cth\u003eNotes\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eNozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e200–230°C\u003c\/td\u003e\n      \u003ctd\u003e\n        Start at 210–215°C. Drop 5°C for stringing,\n        raise 5°C for under-extrusion or poor layer bonding.\n      \u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eBed temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e50–65°C\u003c\/td\u003e\n      \u003ctd\u003e\n        60°C on PEI is the standard. No heated bed?\n        Glue stick on glass works for small and medium prints.\n      \u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eNot required\u003c\/td\u003e\n      \u003ctd\u003e\n        Open-frame printers print PLA+ perfectly. If using an enclosure,\n        keep internal ambient below 30°C to prevent heat creep.\n      \u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePart cooling fan\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e0% first 2 layers → 100%\u003c\/td\u003e\n      \u003ctd\u003e\n        Full cooling after the first two layers. Critical for overhang\n        quality, bridging, and locking in surface detail.\n      \u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePrint speed\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e40–80mm\/s\u003c\/td\u003e\n      \u003ctd\u003e\n        The reliable production range. Slower = better surface finish.\n        Faster = more throughput at slight quality trade-off.\n      \u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eFirst layer speed\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e15–25mm\/s\u003c\/td\u003e\n      \u003ctd\u003e\n        Always slow the first layer. It's the foundation —\n        get it right and the rest of the print follows.\n      \u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eRetraction — Direct Drive\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e1–3mm at 30–50mm\/s\u003c\/td\u003e\n      \u003ctd\u003eStart at 2mm. Increase only if stringing persists after temp adjustment.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eRetraction — Bowden\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e4–6mm at 40–60mm\/s\u003c\/td\u003e\n      \u003ctd\u003eRun a retraction tower on each new color — pigment load affects behavior.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eLayer height\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e0.1–0.28mm\u003c\/td\u003e\n      \u003ctd\u003e\n        0.2mm for general production. 0.15mm for display items.\n        0.28mm for fast structural prints where finish isn't critical.\n      \u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eDrying (if needed)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e50–55°C for 4–6 hours\u003c\/td\u003e\n      \u003ctd\u003e\n        Sudden stringing on a dialed-in profile = wet filament.\n        Dry and the problem disappears.\n      \u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e3 Common PLA+ Problems — Fast Fixes\u003c\/h3\u003e\n\n\u003cp\u003e\n  \u003cstrong\u003eStringing between parts\u003c\/strong\u003e\u003cbr\u003e\n  Lower nozzle temp 5°C first. If it persists, increase retraction 0.5mm.\n  Still stringing? Dry the filament — moisture is the most common hidden\n  cause on a previously well-tuned profile.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  \u003cstrong\u003eFirst layer won't stick\u003c\/strong\u003e\u003cbr\u003e\n  Three checks in order: bed level, Z offset (lower it in 0.05mm steps\n  until you see a slight squish on the first layer), and bed surface cleanliness\n  (wipe PEI with IPA before every session). Raise bed to 65°C if marginal.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  \u003cstrong\u003eHeat creep jams after 10–20 minutes\u003c\/strong\u003e\u003cbr\u003e\n  The heatsink fan is undersized, the enclosure is too warm, or the PTFE\n  tube has a gap at the nozzle. Check all three. For enclosures, keep ambient\n  below 30°C — PLA+'s low glass transition temperature makes it uniquely\n  sensitive to warm chambers.\n\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eBatch Consistency — The Bulk Ordering Advantage\u003c\/h3\u003e\n\n\u003cp\u003e\n  All 20 spools ship from the same manufacturing batch. That means:\n\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eMatched color throughout the order\u003c\/strong\u003e — no shade drift\n    between spool 1 and spool 20. Critical when producing multiple units\n    of the same product that need to match.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eConsistent print behavior\u003c\/strong\u003e — same batch, same melt\n    characteristics. A profile dialed in on spool 1 works on spool 20\n    without re-tuning.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eFewer reorder interruptions\u003c\/strong\u003e — 20kg covers weeks of\n    production. Less time managing inventory, more time running prints.\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eStoring 20 Spools\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eKeep sealed until the spool goes on the printer\u003c\/strong\u003e —\n    the vacuum seal is the best moisture barrier. Don't open stock spools\n    in advance.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eOpen spools go in airtight bins with desiccant\u003c\/strong\u003e —\n    a large storage bin handles 3–4 open spools with room for silica gel packs.\n    Recharge packs at 120°C for 2 hours when they're saturated.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eFirst in, first out\u003c\/strong\u003e — rotate so older spools print\n    before newer ones. Vacuum-sealed PLA+ stays fresh for months; the\n    clock starts when you break the seal.\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWho Is This 20-Pack For?\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eWorkshops and small print farms\u003c\/strong\u003e that run 3–8 machines\n    and want bulk pricing on their core color set without committing to a\n    30-spool order. Stock your five highest-volume colors deep and sample\n    the rest.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eEtsy and print-on-demand sellers\u003c\/strong\u003e building a color\n    catalog strategically — not stocking everything, but making sure the\n    20 colors that drive 80% of orders are always on hand.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eMakerspaces and school labs\u003c\/strong\u003e with 4–8 printers where\n    PLA+ is the standard material. 20kg is a semester's worth of stock\n    at most institutions without needing a dedicated storage system.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eProduction operations scaling up\u003c\/strong\u003e — if you've been\n    buying 3–5 spools at a time and restocking constantly, the 20-pack\n    is the natural next step. Same material, same quality, 42% better\n    per-kg economics.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eSeasonal and event-based producers\u003c\/strong\u003e — photographers,\n    event planners, prop makers — who need 20 specific colors for an\n    upcoming project and want to lock in bulk pricing rather than paying\n    per-spool for each color separately.\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\n  Browse individual spools in our\n  \u003ca href=\"\/collections\/pla-filament\"\u003ePLA Filament collection\u003c\/a\u003e.\n  Explore everything in our\n  \u003ca href=\"\/pages\/3d-printing-filaments\"\u003e3D Printing Filaments guide\u003c\/a\u003e.\n\u003c\/p\u003e\n","brand":"IIID MAX","offers":[{"title":"Default Title","offer_id":52846165721382,"sku":"PLA-PACK-20","price":229.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/PLA-PACK-20.webp?v=1772755204","url":"https:\/\/supplies3d.shop\/products\/20-x-1kg-premium-pla-mix-and-match","provider":"SUPPLIES3D","version":"1.0","type":"link"}