{"title":"High Speed 3D Printers","description":"\u003ch2\u003ePrint Faster Without Sacrificing Quality\u003c\/h2\u003e\n\u003cp\u003eThe new generation of high speed 3D printers has changed everything. Machines that once took 6–8 hours to complete a large print now finish in under 90 minutes. With print speeds ranging from 300mm\/s to 700mm\/s, these printers are built for users who need volume, efficiency, and professional results — without waiting all day.\u003c\/p\u003e\n\u003cp\u003eHigh speed printing is no longer just about raw velocity. Modern machines combine advanced input shaping algorithms, reinforced motion systems, and hardened hotends to maintain dimensional accuracy even at extreme speeds. The result: fast prints that look great and perform reliably.\u003c\/p\u003e\n\u003ch3\u003eWho Needs a High Speed 3D Printer?\u003c\/h3\u003e\n\u003cp\u003eHigh speed printers are ideal for small businesses producing end-use parts, designers iterating quickly through prototypes, makers running print farms, and anyone who has outgrown standard print speeds. If you're printing more than 2–3 hours per day, upgrading to high speed hardware pays for itself quickly in time savings.\u003c\/p\u003e\n\u003ch3\u003eHigh Speed Filaments for Maximum Performance\u003c\/h3\u003e\n\u003cp\u003eTo take full advantage of these machines, pair them with high speed optimized filaments. Our High Speed PETG and High Speed PLA+ from IIID MAX are engineered specifically for 300mm\/s+ speeds — consistent diameter, optimized melt flow, and reliable layer adhesion at high velocity.\u003c\/p\u003e\n\u003cp\u003e← Back to all \u003ca href=\"\/collections\/fdm-3d-printers\"\u003eFDM 3D Printers\u003c\/a\u003e | \u003ca href=\"\/pages\/3d-printers\"\u003eView all 3D Printers\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"qidi-plus4-3d-printer-unleash-your-creativity-with-precision-and-versatility","title":"QIDI Plus4 3D Printer: Unleash Your Creativity with Precision and Versatility","description":"\u003ch2\u003eQIDI Plus4 — Enclosed CoreXY 3D Printer, 370°C Hotend, 65°C Active Chamber, 600mm\/s\u003c\/h2\u003e\n\n\u003cp\u003eThe QIDI Plus4 is a fully enclosed, actively heated CoreXY 3D printer built for engineering-grade filaments. With a 370°C bimetal hotend, a 400W chamber heater that reaches 65°C in under 8 minutes, a 305×305×280mm build volume, 600mm\/s print speed at 20,000mm\/s² acceleration, and Klipper firmware — it handles PPS-CF, PPA-CF, PA-CF, PC, ABS, ASA, and other demanding materials that open-frame or passively enclosed printers simply cannot manage reliably. \u003cstrong\u003eThis listing includes the updated solid state relay installed from the factory.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eActive Chamber Heating — 65°C in 8 Minutes\u003c\/h3\u003e\n\u003cp\u003eThe Plus4's 400W independent chamber heater maintains internal temperature up to 65°C with dual-layer insulation and active air circulation — not passive heat retention from the bed. This is the thermal environment that engineering filaments like ABS, ASA, PC, PA, and fiber-reinforced variants require to print without warping or layer separation. The chamber reaches 65°C in approximately 8 minutes and holds it consistently throughout the print. For materials like PPS-CF and PPA-CF\/GF, this level of chamber temperature control is not optional — it's the difference between a successful print and a failed one.\u003c\/p\u003e\n\n\u003ch3\u003e370°C Hotend — 80W Bimetal Design\u003c\/h3\u003e\n\u003cp\u003eThe second-generation 80W bimetal hotend reaches 370°C with ceramic plate heating and a thermocouple temperature sensor for precise measurement. The bimetal nozzle tip is hardened against abrasive fiber-reinforced filaments. Hardened steel gears with an 8.9:1 transmission ratio in the direct drive extruder maintain consistent grip and feed rate at high speeds and with stiff engineering filaments. An improved air duct design with a larger hotend fan reduces clogging risk and makes jam clearance and maintenance significantly faster.\u003c\/p\u003e\n\n\u003ch3\u003e600mm\/s CoreXY — Dual Z Motors, 10mm Linear Shafts\u003c\/h3\u003e\n\u003cp\u003eThe Plus4's CoreXY motion system uses 10mm high-hardness linear hollow steel shafts on X and Y with automatic belt tensioning. The Z-axis runs dual independent lead screw motors on 10mm linear shafts for flat, reliable bed positioning across the full 305mm platform — underpinned by a 6mm aluminum bed for exceptional flatness. Peak print speed hits 600mm\/s with 20,000mm\/s² acceleration. Klipper's VFA compensation, Input Shaping, and Pressure Advance manage print quality at these speeds.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotion System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCoreXY — 10mm linear hollow steel shafts, auto belt tensioning\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild Volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e305 × 305 × 280 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Print Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAcceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHotend Max Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e370°C — 80W ceramic plate, bimetal nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtruder\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDirect drive — hardened steel gears, 8.9:1 ratio\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4mm bimetal (0.2 \/ 0.6 \/ 0.8mm optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBed Max Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120°C — 6mm aluminum, double-sided textured PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber Heating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eActive — 400W, up to 65°C, reaches 65°C in ~8 min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZ-Axis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual independent lead screw motors — 10mm shafts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFirmware\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKlipper V0.12.0 — VFA compensation, Input Shaping, Pressure Advance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCamera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBuilt-in 1080p — real-time monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTouchscreen\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5-inch HD\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAuto Leveling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes — full auto calibration\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilament Detection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRunout + tangle detection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWi-Fi 2.4G | Ethernet | USB — remote cloud or LAN-only\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQIDI Box Compatible\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes — multi-filament automatic feeding\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSlicing Software\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOrcaSlicer | QIDI Studio | PrusaSlicer | Cura | Simplify3D\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMachine Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e505 × 487 × 550 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e27 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–240VAC | 450W printing + 400W chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolid State Relay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUpdated — installed from factory on this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSupported Filaments\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEngineering\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eABS, ASA, PC, PA (Nylon)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHigh-Performance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePA-CF\/GF, PET-CF\/GF, PPA-CF\/GF, PPS-CF, ABS-GF\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eQIDI Box — Multi-Filament Ready\u003c\/h3\u003e\n\u003cp\u003eThe Plus4 is fully compatible with the QIDI Box multi-filament automatic feeding system. The QIDI Box enables multi-color and multi-material printing, automatic spool switching for uninterrupted long runs, snap-away or dissolvable support strategies, and automatic filament settings matching for QIDI filaments. The Plus4 includes an integrated filament cutter for seamless material changes.\u003c\/p\u003e\n\n\u003ch3\u003eSolid State Relay — Factory Updated\u003c\/h3\u003e\n\u003cp\u003eEarly Plus4 units shipped with a chamber heater control board that caused issues for users in 120V regions. QIDI resolved this with a solid state relay upgrade. This listing specifically features the updated solid state relay installed from the factory — not an aftermarket fix.\u003c\/p\u003e\n\n\u003cp\u003e→ Browse all \u003ca href=\"\/collections\/high-speed-3d-printers\"\u003eHigh Speed 3D Printers\u003c\/a\u003e, explore \u003ca href=\"\/collections\/professional-3d-printers\"\u003eProfessional 3D Printers\u003c\/a\u003e, or shop the full \u003ca href=\"\/collections\/fdm-3d-printers\"\u003eFDM 3D Printers\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":52735645122854,"sku":"QID2449","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/qidi-plus4-3d-printer-unleash-your-creativity-with-precision-and-versatility-west3d-3d-printing-supplies-qidi-tech-463726.webp?v=1773259410"},{"product_id":"sovol-sv08-high-performance-core-xy-3d-printer-with-open-source-flexibility","title":"SOVOL SV08 High-Performance Core-XY 3D Printer with Open-Source Flexibility","description":"\u003ch2\u003eVoron V2.4-Inspired CoreXY 3D Printer, 350×350×300mm, 700mm\/s, Klipper\u003c\/h2\u003e\n\u003cp\u003eThe Sovol SV08 is a large-format CoreXY 3D printer engineered around the Voron V2.4 architecture — Quad-Gantry Leveling with 4 independent Z motors, all-axis linear rails, a 350×350×300mm build volume, 700mm\/s peak print speed, ceramic heating block, AC heated bed, and Klipper firmware with a built-in camera. It's the closest thing to a Voron V2.4 you can buy pre-assembled, at a fraction of the self-source cost and build time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed an enclosure?\u003c\/strong\u003e We have it \u003ca href=\"https:\/\/west3d.com\/products\/sovol-metal-glass-enclosure-kit-for-sv08\"\u003ehere\u003c\/a\u003e. \u003cstrong\u003eNeed nozzles?\u003c\/strong\u003e We have them \u003ca href=\"https:\/\/west3d.com\/products\/sovol-sv08-nozzles\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/CoreXY_3d_printer_80df3dc2-3070-4282-beac-6880443ea059_1000x1000_crop_center.jpg?v=1718442365\" alt=\"Sovol SV08 CoreXY 3D printer full view Voron V2.4 inspired\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eQuad-Gantry Leveling — 4 Independent Z Motors\u003c\/h3\u003e\n\u003cp\u003eThe SV08 uses the same Quad-Gantry Leveling (QGL) system that defines the Voron V2.4. Four independent Z motors continuously compensate for gantry tilt, thermal expansion, and surface variation across the full 350mm build plate. QGL is the reason Voron V2.4 builds are trusted for high-precision, large-format work — the SV08 brings that same architecture to a pre-built machine. Combined with Klipper's adaptive bed mesh and Z-offset compensation, first layers are consistent and reliable regardless of bed temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/X4_Print_Volume_258b192a-3cb7-461e-bba7-32399ecd0141_1000x1000_crop_center.jpg?v=1718444696\" alt=\"Sovol SV08 350x350x300mm build volume quad gantry leveling 4 Z motors\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eAll-Axis Linear Rails + 700mm\/s CoreXY\u003c\/h3\u003e\n\u003cp\u003eLinear rails on all axes eliminate the flex and play that rod or wheel-based systems develop over time. At 700mm\/s peak speed, the SV08's CoreXY motion system needs that rigidity to maintain dimensional accuracy. Klipper's Input Shaping and Pressure Advance algorithms handle the high-speed motion control, compensating for resonance and extrusion lag to maintain print quality at aggressive speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/All-axes_Linear_Rails_4374e1b0-2178-423c-83be-54ced530014f_1000x1000_crop_center.jpg?v=1718444888\" alt=\"Sovol SV08 all-axis linear rails XY and Z axes\" style=\"width: 100%; height: auto;\"\u003e \u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Klipper_d464add6-3c98-4ccb-8cbf-386e3fceec77_1150x365_crop_center.jpg?v=1718444451\" alt=\"Sovol SV08 Klipper firmware with OrcaSlicer compatibility\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eCeramic Heating Block + AC Heated Bed\u003c\/h3\u003e\n\u003cp\u003eThe SV08's ceramic heating block reaches 300°C rapidly — faster than standard aluminum blocks — with better temperature stability at sustained high speeds. The AC-powered heated bed reaches operating temperature significantly faster than DC beds and maintains consistent temperature across the full 350mm surface. For large prints where bed temperature uniformity directly affects warp behavior, the AC bed is a meaningful advantage.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Ceramic_Heating_Block_AC_Power_Heated_Bed_7aec442a-a3c4-4d33-9797-e1d8e29f8bbe_1000x1000_crop_center.jpg?v=1718445737\" alt=\"Sovol SV08 ceramic heating block 300C and AC powered heated bed\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003ePlanetary Gear Extruder + Integrated Hotend\u003c\/h3\u003e\n\u003cp\u003eThe SV08 uses a planetary gear extruder for high torque and consistent filament grip — the gear reduction allows the motor to deliver more force with less mass on the toolhead. The integrated hotend design minimizes the distance between the extruder drive and the melt zone, reducing flex and improving retraction performance at high speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/sv08_planetary_Gear_Extruder_sovol3d.com_407x_crop_center.jpg?v=1718701889\" alt=\"Sovol SV08 planetary gear extruder for high torque filament feeding\" style=\"width: 100%; height: auto;\"\u003e \u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/sv08_integrated_hotend_sovol3d.com_407x_crop_center.jpg?v=1718702062\" alt=\"Sovol SV08 integrated hotend design for high speed printing\" style=\"width: 100%; height: auto;\"\u003e \u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/sv08_rapid_filament_cooling_sovol3d.com_407x_crop_center.jpg?v=1718701993\" alt=\"Sovol SV08 rapid filament cooling system\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eKlipper Features — Full Suite Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuad-Gantry Leveling (QGL)\u003c\/strong\u003e — automatic, runs before every print\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdaptive bed mesh\u003c\/strong\u003e — leveling grid matched to actual model footprint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZ-offset compensation\u003c\/strong\u003e — automatic first layer calibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFall-free flying gantry\u003c\/strong\u003e — gantry stays level when power is cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Shaping\u003c\/strong\u003e — resonance compensation for clean prints at high speed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Advance\u003c\/strong\u003e — precise extrusion at corners and speed transitions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote monitoring\u003c\/strong\u003e — built-in camera with real-time viewing and time-lapse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/sv08_fall-free_flying_gantry_sovol3d.com_407x_crop_center.jpg?v=1718701569\" alt=\"Sovol SV08 fall-free flying gantry safety feature\" style=\"width: 100%; height: auto;\"\u003e \u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/sv08_z-offset_compensation_sovol3d.com_407x_crop_center.jpg?v=1718701705\" alt=\"Sovol SV08 automatic Z-offset compensation Klipper\" style=\"width: 100%; height: auto;\"\u003e \u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/sv08_adaptive_bed_mesh_sovol3d.com_407x_crop_center.jpg?v=1718701793\" alt=\"Sovol SV08 adaptive bed mesh leveling Klipper\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotion System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCoreXY — all-axis linear rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild Volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350 × 350 × 300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Print Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e700 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZ-Axis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 independent motors — Quad-Gantry Leveling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHotend Max Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300°C — ceramic heating block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeated Bed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAC powered — fast heat-up, uniform temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtruder\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlanetary gear — high torque, lightweight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFirmware\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKlipper — open source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSlicing Software\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOrcaSlicer (recommended)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCamera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBuilt-in — real-time monitoring + time-lapse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAssembly Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~1 hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOpen Source\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes — fully open\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Orcaslicer_slice_64a4a8c7-2c8c-494f-b86e-a521a8e5a136_1919x1026_crop_center.png?v=1718445110\" alt=\"Sovol SV08 OrcaSlicer profile and slicing interface\" style=\"width: 100%; height: auto;\"\u003e \u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Fully_Open-source_SV08_Printer_1606bf8f-2e1a-4fa4-8042-f156c02b0ed1_1000x1000_crop_center.jpg?v=1718445270\" alt=\"Sovol SV08 fully open source printer Klipper community\" style=\"width: 100%; height: auto;\"\u003e \u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Remote_Control_SV08_Printer_8648499a-aa61-4923-9991-3b337f00df4f_1000x1000_crop_center.jpg?v=1718445853\" alt=\"Sovol SV08 built-in camera remote monitoring and time-lapse\" style=\"width: 100%; height: auto;\"\u003e \u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/sv08_printer_specification_1150x1002_crop_center.png?v=1718765651\" alt=\"Sovol SV08 full technical specifications sheet\" style=\"width: 100%; height: auto;\"\u003e \u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/SV08_PACKAGE_1150x2960_crop_center.png?v=1718765686\" alt=\"Sovol SV08 package contents and included accessories\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e→ Browse all \u003ca href=\"\/collections\/high-speed-3d-printers\"\u003eHigh Speed 3D Printers\u003c\/a\u003e, explore \u003ca href=\"\/collections\/professional-3d-printers\"\u003eProfessional 3D Printers\u003c\/a\u003e, or shop the full \u003ca href=\"\/collections\/fdm-3d-printers\"\u003eFDM 3D Printers\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":52735649775910,"sku":"SOV2025","price":479.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/sovol-sv08-3d-printer-inspired-by-the-voron-v24-west3d-3d-printing-supplies-sovol-662983.webp?v=1773259425"},{"product_id":"sovol-sv08-max-large-500x500x500mm-high-performance-core-xy-3d-printer-with-open-source-flexibility","title":"SOVOL SV08 MAX - Large 500x500x500mm High-Performance Core-XY 3D Printer with Open-Source Flexibility","description":"\u003c!-- ============================================================\n     SOVOL SV08 MAX — Product Description for Shopify\n     Clean HTML for product description field\n     No section tags. No theme classes. No external links.\n     H1 handled by Shopify product title.\n     ============================================================ --\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- INTRO --\u003e\n\u003cp\u003eThe \u003cstrong\u003eSOVOL SV08 MAX\u003c\/strong\u003e is a professional-grade \u003cstrong\u003elarge-format 3D printer\u003c\/strong\u003e that redefines what's possible on the desktop. Combining a colossal \u003cstrong\u003e500×500×500mm³ build volume\u003c\/strong\u003e with blazing-fast speeds of up to \u003cstrong\u003e700mm\/s\u003c\/strong\u003e and a suite of advanced features, the SV08 MAX delivers pro-level performance at an unbeatable price. Inspired by the highly-regarded \u003cstrong\u003eVoron 2.4\u003c\/strong\u003e, it brings that same performance without the weeks of self-assembly.\u003c\/p\u003e\n\u003c!-- BUILD VOLUME IMAGE --\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" height=\"1272\" width=\"1200\" alt=\"SOVOL SV08 MAX large-format 3D printer — 500x500x500mm build volume for industrial parts, full-scale prototypes and large models\" src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/SV08_Max_large_build_volume.jpg?v=1748223073\"\u003e\u003c\/p\u003e\n\u003c!-- BUILD VOLUME --\u003e\n\u003ch2\u003eA Colossal 500×500×500mm³ Build Volume\u003c\/h2\u003e\n\u003cp\u003eSay goodbye to the limitations of smaller printers. The SV08 MAX boasts an incredible \u003cstrong\u003e500×500×500mm³ build volume\u003c\/strong\u003e, allowing you to print full-scale prototypes, cosplay props, industrial parts, or multiple models in a single run. No more slicing designs into pieces and dealing with time-consuming post-assembly. Create in one seamless process — ensuring structural integrity and a streamlined workflow.\u003c\/p\u003e\n\u003c!-- SPEED IMAGE --\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" height=\"1600\" width=\"1200\" alt=\"SOVOL SV08 MAX printing at 700mm\/s — high-speed large-format 3D printer with CoreXY kinematics\" src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/SV08_Max_3D_Printer_Hight_Speed.jpg?v=1746583920\"\u003e\u003c\/p\u003e\n\u003c!-- SPEED --\u003e\n\u003ch2\u003e700mm\/s — Go Big Without Slowing Down\u003c\/h2\u003e\n\u003cp\u003eThe SOVOL SV08 MAX reaches a maximum print speed of \u003cstrong\u003e700mm\/s\u003c\/strong\u003e and an acceleration of \u003cstrong\u003e40,000mm\/s²\u003c\/strong\u003e, slashing print times by up to 50%. Its advanced \u003cstrong\u003eCoreXY kinematics\u003c\/strong\u003e and full \u003cstrong\u003elinear rails on all axes\u003c\/strong\u003e minimize moving mass and vibrations — ensuring prints are not only fast but incredibly precise. The high-flow nozzle pushes up to \u003cstrong\u003e50mm³\/s\u003c\/strong\u003e of filament without compromising quality.\u003c\/p\u003e\n\u003c!-- COREXY IMAGE --\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" height=\"1365\" width=\"1200\" alt=\"SOVOL SV08 MAX CoreXY motion system — minimal moving mass, reduced vibration, unmatched precision at high speeds\" src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/SV08_Max_CoreXY_3D_Printer.jpg?v=1751531597\"\u003e\u003c\/p\u003e\n\u003c!-- COREXY --\u003e\n\u003ch2\u003eCoreXY Kinematics for Maximum Precision\u003c\/h2\u003e\n\u003cp\u003eWith its compact design, minimal moving mass, and optimized motion path, the CoreXY system enables faster acceleration, reduced vibration, and unmatched print precision. Experience smoother, high-speed printing — perfect for large, complex models.\u003c\/p\u003e\n\u003c!-- ADVANCED FEATURES --\u003e\n\u003ch2\u003eAdvanced Features for a Flawless Printing Experience\u003c\/h2\u003e\n\u003c!-- Eddy Current GIF --\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" height=\"1080\" width=\"1920\" alt=\"SOVOL SV08 MAX eddy current sensor auto bed leveling — contactless scanning for perfect first layer every time\" src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/eddy_d8d130b1-f454-4701-9340-666a760ff07e.gif?v=1751508303\u0026amp;width=1920\"\u003e\u003c\/p\u003e\n\u003ch3\u003eEddy Current Sensor Auto-Leveling\u003c\/h3\u003e\n\u003cp\u003eAchieve a perfect first layer effortlessly with the advanced \u003cstrong\u003eEddy Current Scanning\u003c\/strong\u003e system. This contactless technology quickly and accurately maps the entire 500×500mm bed, detecting even the smallest surface deviations to ensure impeccable adhesion before every print.\u003c\/p\u003e\n\u003c!-- Camera GIF --\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" height=\"1080\" width=\"1920\" alt=\"SOVOL SV08 MAX built-in 1280x720 HD camera — remote monitoring, time-lapse recording and Obico cloud integration\" src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/camera_f33f4186-1b17-4dc8-aab1-e285b4cd994c.gif?v=1751512904\u0026amp;width=1920\"\u003e\u003c\/p\u003e\n\u003ch3\u003eBuilt-In Camera \u0026amp; Remote Monitoring\u003c\/h3\u003e\n\u003cp\u003eThe SV08 MAX comes equipped with a \u003cstrong\u003ebuilt-in 1280×720 HD camera\u003c\/strong\u003e, enabling seamless remote monitoring, time-lapse recording, and integration with Obico for advanced cloud-based control and intelligent print failure detection. Check on your projects from anywhere.\u003c\/p\u003e\n\u003c!-- Nozzle GIF --\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" height=\"1080\" width=\"1920\" alt=\"SOVOL SV08 MAX high-temp nozzle at 300°C — compatible with ABS, ASA, PC, PLA-CF, PETG-CF and engineering filaments\" src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/SV08_MAX_nozzle.gif?v=1751508979\u0026amp;width=1920\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHigh-Temp Hotend — Up to 300°C\u003c\/h3\u003e\n\u003cp\u003eWith a maximum nozzle temperature of \u003cstrong\u003e300°C\u003c\/strong\u003e, the SV08 MAX handles a wide range of filaments including ABS, ASA, PC, and carbon-fiber reinforced materials. Comes with 2 standard 0.4mm nozzles. Optional sizes of \u003cstrong\u003e0.4mm, 0.6mm, and 0.8mm\u003c\/strong\u003e available separately.\u003c\/p\u003e\n\u003c!-- Heated Chamber GIF --\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" height=\"450\" width=\"800\" alt=\"SOVOL SV08 MAX optional heated chamber upgrade interface — future-ready for high-temperature filament printing\" src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/sv08_max_gif.gif?v=1751533156\u0026amp;width=800\"\u003e\u003c\/p\u003e\n\u003ch3\u003eOptional Heated Chamber\u003c\/h3\u003e\n\u003cp\u003eThe SV08 MAX includes a reserved interface for a Heated Chamber module, allowing users to upgrade for high-temperature filament compatibility in the future. \u003cstrong\u003eThe heating module is sold separately.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!-- Linear Rails GIF --\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" height=\"450\" width=\"800\" alt=\"SOVOL SV08 MAX industrial-grade linear rails on all axes — smoother motion, reduced artifacts, long-term durability\" src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Linear_Rails.gif?v=1751512850\u0026amp;width=800\"\u003e\u003c\/p\u003e\n\u003ch3\u003eIndustrial Grade Linear Rails\u003c\/h3\u003e\n\u003cp\u003eIndustrial-grade linear rails on all axes ensure smoother motion and superior control, enhancing print quality and reliability by minimizing artifacts. Greater rigidity and corrosion resistance deliver extended durability for long-term performance.\u003c\/p\u003e\n\u003c!-- Filament Compatibility --\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" height=\"569\" width=\"680\" alt=\"SOVOL SV08 MAX wide filament compatibility — PLA, TPU, PETG, ABS, ASA, PA, PC, PLA-CF, PETG-CF, HP-PLA\" src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/SV08_Max_wide_compatibility.jpg?v=1751536655\u0026amp;width=680\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWide Filament Compatibility\u003c\/h3\u003e\n\u003cp\u003ePerfectly handles a wide range of advanced and challenging filaments including \u003cstrong\u003ePLA, TPU, PETG, ABS, ASA, PA, PC, PLA-CF, PETG-CF, and HP-PLA\u003c\/strong\u003e — catering to diverse applications and printing needs.\u003c\/p\u003e\n\u003c!-- SMART SYSTEMS --\u003e\n\u003ch2\u003eSmart Systems for Uninterrupted Printing\u003c\/h2\u003e\n\u003c!-- Auxiliary Feeder --\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" height=\"1000\" width=\"1400\" alt=\"SOVOL SV08 MAX smart auxiliary feeder system — tangle detection and clog detection for uninterrupted 3D printing\" src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Sovol_SV08_Max_3D_Printer_Auxiliary_Feeder.jpg?v=1746583919\u0026amp;width=1400\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSmart Auxiliary Feeder\u003c\/h3\u003e\n\u003cp\u003eThe Smart Auxiliary Feeder System assists with smooth filament feeding while featuring \u003cstrong\u003etangle and clog detection\u003c\/strong\u003e to ensure uninterrupted printing. It actively monitors filament flow and prevents issues before they affect your print.\u003c\/p\u003e\n\u003c!-- Hotbed --\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" height=\"1000\" width=\"1400\" alt=\"SOVOL SV08 MAX thickened 8mm aluminum hotbed — 1300W rapid even heating for consistent adhesion on large prints\" src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/SV08_Max_3D_Printer_Botbed.jpg?v=1746583919\u0026amp;width=1400\"\u003e\u003c\/p\u003e\n\u003ch3\u003eThickened 8mm Aluminum Hotbed — 1300W\u003c\/h3\u003e\n\u003cp\u003eEquipped with an \u003cstrong\u003e8mm thick aluminum bed\u003c\/strong\u003e and \u003cstrong\u003e1300W of power\u003c\/strong\u003e, the hotbed delivers rapid and even heating across the entire surface. The reinforced structure minimizes warping, ensuring consistent adhesion and reliable prints — even on large models.\u003c\/p\u003e\n\u003c!-- First Layer --\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" height=\"1000\" width=\"1400\" alt=\"SOVOL SV08 MAX perfect first layer — automatic bed calibration via eddy current scanning and pressure-sensing touch points\" src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Prefect_First_Layer_2.jpg?v=1751537655\u0026amp;width=1400\"\u003e\u003c\/p\u003e\n\u003ch3\u003ePerfect First Layer — Every Time\u003c\/h3\u003e\n\u003cp\u003eBy combining eddy current scanning with pressure-sensing touch points for automatic bed calibration, achieving a perfect first layer becomes effortless — no manual adjustment required.\u003c\/p\u003e\n\u003c!-- KLIPPER --\u003e\n\u003ch2\u003eKlipper Firmware \u0026amp; Open Source Control\u003c\/h2\u003e\n\u003cp\u003eThe SV08 MAX comes with pre-installed \u003cstrong\u003eKlipper firmware\u003c\/strong\u003e, offering an open-source platform for unparalleled control and customization. Fine-tune your printer with \u003cstrong\u003eInput Shaping\u003c\/strong\u003e and \u003cstrong\u003ePressure Advance\u003c\/strong\u003e to eliminate ringing and improve print accuracy. Sliced with \u003cstrong\u003eOrcaSlicer\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c!-- SPECS TABLE --\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #f5f5f5;\"\u003e\n\u003cth style=\"padding: 10px; text-align: left; border: 1px solid #ddd;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"padding: 10px; text-align: left; border: 1px solid #ddd;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eBuild Volume (W×D×H)\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e500×500×500mm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eMax Printing Speed\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e700mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eMax Acceleration\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e40,000mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eMax Flow Rate\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e50mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e≤300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eHotbed Temperature\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e≤100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eHotbed Power\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e1300W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eHotbed Thickness\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e8mm Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eRAM\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e1GB (512MB + 512MB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eStorage\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e8GB eMMC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eFilament Runout Detection\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003ePower Loss Resume\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eTangle \/ Clog Detection\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eAuxiliary Feeding\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eSlicer\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eOrcaSlicer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eHeating Method\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eCeramic Heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eNozzle\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eStandard: 2 × 0.4mm | Optional: 0.4 \/ 0.6 \/ 0.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eControl System\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eKlipper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eMotors\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eZ: TMC2209×4 | A: TMC5160×1 | B: TMC5160×1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eCommunication\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eCAN bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eConnections\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eUSB, Wi-Fi (2.4G\/5G), HDMI, Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003ePrinter Size\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e700×710×750mm (excluding spool holder)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003ePrinter Package Size\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e810×820×360mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003eEnclosure Kit Package\u003c\/td\u003e\n\u003ctd style=\"padding: 10px; border: 1px solid #ddd;\"\u003e775×728×155mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the build volume of the SOVOL SV08 MAX?\u003c\/h3\u003e\n\u003cp\u003eThe SV08 MAX has a build volume of \u003cstrong\u003e500×500×500mm³\u003c\/strong\u003e — one of the largest available in its price range, ideal for full-scale prototypes, large props, furniture parts, and industrial components.\u003c\/p\u003e\n\u003ch3\u003eWhat is the maximum print speed of the SV08 MAX?\u003c\/h3\u003e\n\u003cp\u003eThe SV08 MAX reaches a maximum print speed of \u003cstrong\u003e700mm\/s\u003c\/strong\u003e with an acceleration of 40,000mm\/s², slashing print times by up to 50% compared to conventional large-format printers.\u003c\/p\u003e\n\u003ch3\u003eWhat filaments is the SOVOL SV08 MAX compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe SV08 MAX supports a wide range of materials including \u003cstrong\u003ePLA, TPU, PETG, ABS, ASA, PA, PC, PLA-CF, PETG-CF, and HP-PLA\u003c\/strong\u003e. Its 300°C hotend handles both standard and engineering-grade filaments.\u003c\/p\u003e\n\u003ch3\u003eDoes the SV08 MAX use Klipper firmware?\u003c\/h3\u003e\n\u003cp\u003eYes. The SV08 MAX comes with \u003cstrong\u003eKlipper pre-installed\u003c\/strong\u003e, offering full open-source customization including Input Shaping and Pressure Advance for optimal print quality.\u003c\/p\u003e\n\u003ch3\u003eDoes the SV08 MAX have automatic bed leveling?\u003c\/h3\u003e\n\u003cp\u003eYes. The SV08 MAX uses an \u003cstrong\u003eEddy Current Scanning system\u003c\/strong\u003e combined with pressure-sensing touch points to automatically level the bed before every print — no manual intervention required.\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":52735665864998,"sku":"SOV3488","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/sovol-sv08-max-large-500x500x500mm-high-performance-core-xy-3d-printer-with-open-source-flexibility-west3d-3d-printing-supplies-sovol-9072282.webp?v=1773259442"},{"product_id":"sovol-zero-high-performance-compact-core-xy-3d-printer-with-open-source-flexibility-based-on-v0-2","title":"SOVOL ZERO High-Performance Compact Core-XY 3D Printer with Open-Source Flexibility based on V0.2","description":"\u003ch2\u003eEnclosed CoreXY 3D Printer, 1200mm\/s, Klipper, 350°C Hotend\u003c\/h2\u003e\n\u003cp\u003eThe Sovol Zero is a compact, fully enclosed CoreXY 3D printer built for speed, material versatility, and clean air quality — all in a small footprint. With a peak print speed of 1200mm\/s, XYZ full linear rails, a 350°C hotend, AC heated bed up to 120°C, built-in camera, air filtration, and Klipper firmware out of the box, the Zero packs a feature set that punches well above its size and price point.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Sovol_Zero_Hight_speed_3D_Printers.jpg?v=1742290544\" alt=\"Sovol Zero high speed 3D printer enclosed CoreXY full view\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003e1200mm\/s CoreXY — Speed Without Sacrifice\u003c\/h3\u003e\n\u003cp\u003eThe Zero's CoreXY motion system uses a compact layout with fewer moving parts and reduced inertia — the foundation for its 1200mm\/s peak print speed. Klipper's Input Shaping technology compensates for mechanical resonance at high accelerations, eliminating ringing and ghosting artifacts that typically appear when pushing speeds this high. Pressure Advance handles extrusion lag compensation at corners and during acceleration\/deceleration changes, keeping extrusion precise regardless of speed.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Sovol_Zero_CoreXY_3D_Printers.jpg?v=1742290544\" alt=\"Sovol Zero CoreXY kinematic system diagram\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003e3.0 Auto-Leveling — Eddy Current + Pressure Sensing\u003c\/h3\u003e\n\u003cp\u003eThe Zero's next-generation auto-leveling combines two independent sensing methods. An eddy current sensor rapidly maps the Z-axis compensation grid using magnetic induction without touching the bed surface — faster and more consistent than traditional contact-only methods. A pressure sensor then fine-tunes the exact touchpoint location for precision bed calibration. Adaptive area detection further optimizes the leveling grid to match the actual footprint of your model, reducing preparation time and improving first-layer accuracy in detail areas.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Sovol_Zero_auto_leveling.jpg?v=1742443569\" alt=\"Sovol Zero 3.0 auto-leveling eddy current and pressure sensor system\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003e350°C Hotend — Engineering Material Ready\u003c\/h3\u003e\n\u003cp\u003eThe Zero's hotend reaches 350°C, opening the door to PA (Nylon), PC (Polycarbonate), ASA, ABS, and other high-performance materials that standard 240–260°C hotends can't handle reliably. Combined with the 120°C AC heated bed and enclosed chamber, the Zero creates the thermal environment these materials require to print without warping or delamination.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Sovol_3D_Printer_hot_end.jpg?v=1743082586\" alt=\"Sovol Zero high temperature hotend 350C for engineering filaments\" style=\"width: 100%; height: auto;\"\u003e \u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Zero_AC_Heated_Bed_120_2112ea7b-6800-4913-862a-485f52973964.png?v=1742978074\" alt=\"Sovol Zero AC heated bed reaching 120C with overheating protection\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eXYZ Full Linear Rails — Precision at Every Axis\u003c\/h3\u003e\n\u003cp\u003eAll three axes run on full linear rails — not the rods or wheels used in budget machines. Linear rails provide greater rigidity, smoother motion, reduced backlash, and better corrosion resistance for long-term reliability. At high speeds, the difference between rails and rods is measurable in print quality.\u003c\/p\u003e\n\u003ch3\u003eEnclosed Design + Air Filtration\u003c\/h3\u003e\n\u003cp\u003eThe Zero's enclosed chamber serves two purposes: thermal stability for warp-prone materials, and containment of VOCs and particulate emissions. The built-in air filtration system actively filters VOCs and particles generated during printing. This doesn't eliminate the need for ventilation when printing materials that off-gas heavily, but it's a meaningful improvement over open-frame printers for everyday use.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/3_da07ed13-b681-4158-9bc3-2be75d4369b2.jpg?v=1742286901\" alt=\"Sovol Zero air filtration system for VOC and particle filtering\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eBuilt-In Camera + Obico Integration\u003c\/h3\u003e\n\u003cp\u003eThe Zero ships with a built-in camera that provides real-time print monitoring and time-lapse recording. It integrates with Obico for remote monitoring and failure detection — so you can watch your print from anywhere and get notified if something goes wrong.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/6_d82a6309-8284-43c3-b875-33e2480c62f4.jpg?v=1742286910\" alt=\"Sovol Zero built-in camera for real-time monitoring and Obico integration\" style=\"width: 100%; height: auto;\"\u003e \u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/7_926a3a51-047b-4bf4-9ed0-11a6c9bbaae8.jpg?v=1742286911\" alt=\"Sovol Zero silicone damping pad for vibration absorption\" style=\"width: 100%; height: auto;\"\u003e \u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/sovol_zero_3d_printer_8af34120-246c-495e-a66b-937e731fb73a.png?v=1743066796\" alt=\"Sovol Zero enclosed printer full view with filament sensor\" style=\"width: 100%; height: auto;\"\u003e \u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Sovol_Zero_3D_Printer_Filament_type.jpg?v=1743156572\" alt=\"Sovol Zero compatible filament types PLA PETG ABS ASA PA PC\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eKlipper — Open Source \u0026amp; Ready to Customize\u003c\/h3\u003e\n\u003cp\u003eThe Zero runs Klipper firmware natively, giving you full access to Input Shaping, Pressure Advance, adaptive bed meshing, and the entire Klipper ecosystem of macros and plugins. The printer is fully open source — modify, customize, and extend it however you want. Chamber temperature monitoring is built in, with chamber heating compatibility planned for a future component.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Ready_to_use.jpg?v=1743063450\" alt=\"Sovol Zero ships ready to use minimal assembly required\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotion System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCoreXY — XYZ full linear rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild Volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e152.4 × 152.4 × 152.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePeak Print Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Hotend Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Bed Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120°C (AC heated bed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFirmware\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKlipper — open source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAuto-Leveling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.0 — eddy current + pressure sensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes — fully enclosed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAir Filtration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes — VOC + particle filtering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCamera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBuilt-in — Obico compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber Monitoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTemperature sensor included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilament Runout Sensor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAssembly Required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMinimal — antenna, screen, filament sensor only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported Filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, ABS, ASA, PA, PC, TPU and more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eKlipper Features Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Shaping\u003c\/strong\u003e — compensates for mechanical resonance, eliminates ringing at high speeds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Advance\u003c\/strong\u003e — precision extrusion control at corners and speed changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdaptive Area Detection\u003c\/strong\u003e — bed leveling optimized to the actual model footprint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Source\u003c\/strong\u003e — full access to customize macros, plugins, and configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Sovol_SV08_3D_Printer_Adaptive_Area_Detection.jpg?v=1741140822\" alt=\"Sovol Zero Klipper adaptive area detection for bed leveling\" style=\"width: 100%; height: auto;\"\u003e \u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/SV08_3D_Printer_Pressure_Advance.jpg?v=1741140822\" alt=\"Sovol Zero Klipper pressure advance for precise extrusion\" style=\"width: 100%; height: auto;\"\u003e \u003cimg src=\"https:\/\/www.sovol3d.com\/cdn\/shop\/files\/Sovol_SV08_3D_Printer_Input_Shaping.jpg?v=1741140822\" alt=\"Sovol Zero Klipper input shaping to eliminate ringing at high speed\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e→ Browse all \u003ca href=\"\/collections\/high-speed-3d-printers\"\u003eHigh Speed 3D Printers\u003c\/a\u003e or explore the full \u003ca href=\"\/collections\/fdm-3d-printers\"\u003eFDM 3D Printers\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":52735669305638,"sku":"SOV2810","price":369.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/sovol-zero-high-performance-compact-core-xy-3d-printer-with-open-source-flexibility-based-on-v02-west3d-3d-printing-supplies-sovol-298518.webp?v=1773259447"},{"product_id":"flashforge-ad5x-multi-filament-multi-color-corexy-fast-3d-printer","title":"Flashforge AD5X - Multi-Filament Multi-Color CoreXY FAST 3D Printer","description":"\u003ch2\u003e4-Color CoreXY 3D Printer with Intelligent Filament System\u003c\/h2\u003e\n\u003cp\u003eThe Flashforge AD5X is the best entry-level multi-color 3D printer on the market right now. It brings four-filament, multi-color printing to an accessible price point without cutting corners on speed, build quality, or ease of use. CoreXY motion system, up to 600mm\/s print speed, automatic bed leveling, and an integrated Intelligent Filament System — all in a printer that's genuinely easy to set up and use from day one.\u003c\/p\u003e\n\u003ch3\u003eIntelligent Filament System (IFS) — 4 Colors, Automated\u003c\/h3\u003e\n\u003cp\u003eThe AD5X's IFS handles up to four filament colors simultaneously with fully automated switching. The system uses two 28-step stepper motors, a clutch shaft, and four individual filament channels to switch colors automatically during printing. A built-in nozzle cleaning cycle runs after each color swap to prevent color bleeding — so you get crisp transitions, not muddy blends. When printing in single-color mode and one spool runs out, the IFS automatically feeds from the next spool without stopping the print.\u003c\/p\u003e\n\u003ch3\u003eCoreXY at 600mm\/s — Real Speed, Real Quality\u003c\/h3\u003e\n\u003cp\u003eThe AD5X's all-metal CoreXY frame keeps the print head lightweight and motors stationary, minimizing inertia for stable high-speed motion. Peak print speed hits 600mm\/s with 20,000mm\/s² acceleration. Vibration compensation and pressure sensing are handled in firmware by a dual-core Cortex-A53 MCU with 8GB onboard storage — the same processing architecture found in much more expensive machines.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotion System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCoreXY — all-metal frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild Volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e220 × 220 × 220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Print Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColors \/ Filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 4 simultaneous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtruder Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDirect drive — all-metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Nozzle Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Bed Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e110°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4mm (default) | 0.25mm \/ 0.6mm \/ 0.8mm optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePEI flexible magnetic steel sheet — removable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBed Leveling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFull-auto one-click — pressure sensor + nozzle contact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMCU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual-core Cortex-A53 | 8GB onboard storage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWi-Fi (5G + 2.4G) | Ethernet | USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTouchscreen\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.3-inch color LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower-Loss Recovery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSlicing Software\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOrca-Flashforge (Orca Slicer fork) | PrusaSlicer | Cura\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMachine Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e363 × 363 × 413 mm (without display\/spool holder)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOpen frame — enclosure kit available separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSupported Filaments\u003c\/h3\u003e\n\u003cp\u003ePLA, PLA Pro, High-Speed PLA, Matte PLA, Silk PLA, PETG, PETG Pro, High-Speed PETG, TPU 95A, TPU 64D, ASA, PLA-CF, PETG-CF. Compatible with third-party brands.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× Flashforge AD5X 3D Printer\u003c\/li\u003e\n\u003cli\u003ePEI build plate\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eFilament spool holder\u003c\/li\u003e\n\u003cli\u003e1× spool of filament (sample)\u003c\/li\u003e\n\u003cli\u003eQuick-release nozzle\u003c\/li\u003e\n\u003cli\u003eUSB drive\u003c\/li\u003e\n\u003cli\u003eTool kit\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat to Know Before You Buy\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen frame design:\u003c\/strong\u003e The AD5X ships without an enclosure. An optional enclosure kit is available from Flashforge and adds noise reduction, temperature stability, and odor containment — recommended if you plan to print ASA or other warp-prone materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlicer:\u003c\/strong\u003e The AD5X uses Orca-Flashforge, Flashforge's fork of OrcaSlicer. Standard OrcaSlicer also has a profile for the AD5X and works well for most use cases.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurge waste:\u003c\/strong\u003e Multi-color printing generates filament purge waste during color swaps. Plan spool quantities accordingly for large multi-color prints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera and lighting:\u003c\/strong\u003e Not included — available as add-on accessories from Flashforge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e→ Browse all \u003ca href=\"\/collections\/fdm-3d-printers\"\u003eFDM 3D Printers\u003c\/a\u003e or compare with our \u003ca href=\"\/collections\/high-speed-3d-printers\"\u003eHigh Speed 3D Printers\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":52735674974502,"sku":"FLA3444","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/flashforge-ad5x-multi-filament-multi-color-corexy-fast-3d-printer-west3d-3d-printing-supplies-flashforge-1899195.webp?v=1773259454"},{"product_id":"flashforge-ad5x-multicolor-3d-printer-for-high-speed-full-color-printing","title":"Flashforge AD5X – Multicolor 3D Printer for High-Speed, Full-Color Printing","description":"\u003c!-- ============================================================\n     SUPPLIES3D.SHOP — PRODUCT DESCRIPTION\n     Product : Flashforge AD5X (Adventurer 5X)\n     Silo    : Silo 2 — 3D Printers\n     Tags    : #fdm-printer · #high-speed-printer\n     ============================================================ --\u003e\n\u003ch2\u003e4-Color Multicolor FDM 3D Printer | IFS Built-In | 300 mm\/s | TPU 95A Compatible\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eFlashforge AD5X\u003c\/strong\u003e (Adventurer 5X) is a high-speed, multicolor FDM 3D printer with a \u003cstrong\u003ebuilt-in 4-color Intelligent Filament System (IFS)\u003c\/strong\u003e — no external box, no add-on module, no extra cables. Load four spools, pick your colors in the slicer, and print. It is the simplest path to full-color 3D printing available in this price range, and the \u003cstrong\u003efirst printer in the Flashforge Adventurer lineup to support multicolor printing in flexible TPU 95A\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eBuilt on a \u003cstrong\u003eCoreXY all-metal frame\u003c\/strong\u003e, it prints at up to \u003cstrong\u003e300 mm\/s\u003c\/strong\u003e with a \u003cstrong\u003e600 mm\/s travel speed\u003c\/strong\u003e and \u003cstrong\u003e20,000 mm\/s² acceleration\u003c\/strong\u003e — the same motion performance as the Adventurer 5M Pro, now with full-color capability built in from day one.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e⚠️ Important — Read Before Printing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen frame design:\u003c\/strong\u003e The AD5X does not have a fully enclosed build chamber. This means it works best with PLA, PETG, TPU, ASA, and similar filaments. ABS and high-temp engineering materials that require a consistently warm environment may warp on open-frame printers — plan your material selection accordingly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e The AD5X operates at approximately 72–80 dB during normal use — roughly the level of a vacuum cleaner in the same room. Suitable for workshops and maker spaces; may be noticeable in quiet home office environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurge waste during color changes:\u003c\/strong\u003e Switching between colors requires purging the previous color from the nozzle. This generates waste material — especially noticeable with TPU, which requires more purge volume to clear completely. Factor this into your filament planning for multi-color jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIFS is not backward compatible:\u003c\/strong\u003e The AD5X's IFS system is not compatible with the older AD5M or AD5M Pro. These are distinct machines with different hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPU handling:\u003c\/strong\u003e The AD5X supports TPU 95A in multicolor — a genuine first for the Flashforge Adventurer series. However, TPU is sensitive to printing speed and retraction settings. Start with slower speeds (30–50 mm\/s) and minimal retraction when printing flexible filaments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat Is the IFS — and Why Does It Change Everything About Multicolor Printing?\u003c\/h3\u003e\n\u003cp\u003eMost multicolor 3D printers work one of two ways: either they have two separate nozzles (dual extruder), or they use a large external \"feeder box\" that feeds multiple filaments into a single nozzle through a tube system.\u003c\/p\u003e\n\u003cp\u003eBoth approaches have trade-offs. Dual nozzles add weight to the print head and can cause oozing from the idle nozzle. External feeder boxes sit next to the printer, add complexity, and require precise calibration.\u003c\/p\u003e\n\u003cp\u003eThe AD5X takes a different path. Its \u003cstrong\u003eIntelligent Filament System (IFS)\u003c\/strong\u003e is built \u003cem\u003einside\u003c\/em\u003e the printer from the factory — no external hardware, no extra wiring, no calibration ritual. Here is how it works in plain terms:\u003c\/p\u003e\n\u003cp\u003eImagine a traffic roundabout for filament. Four spools feed into four channels. A small automated switching mechanism selects which channel is active and feeds that filament to the single nozzle. When the slicer calls for a color change, the system cuts the current filament, retracts it, pulls in the next color, purges the small amount of mixed material, and resumes printing — all automatically, in seconds.\u003c\/p\u003e\n\u003cp\u003eThe result: \u003cstrong\u003eup to 4 colors in a single print\u003c\/strong\u003e, from a machine that takes 10 minutes to set up and requires no prior multicolor printing experience.\u003c\/p\u003e\n\u003ch3\u003eThe Part That Makes This Printer Unique: Multicolor TPU\u003c\/h3\u003e\n\u003cp\u003ePrinting flexible filaments (TPU) is already harder than printing rigid materials — they stretch, they buckle in the feed tube, and they do not cut cleanly when switching. Printing them in \u003cem\u003emultiple colors\u003c\/em\u003e has historically been a frustrating, often impossible task on most consumer printers.\u003c\/p\u003e\n\u003cp\u003eThe AD5X is the \u003cstrong\u003efirst printer in the Flashforge Adventurer series\u003c\/strong\u003e to pull this off. Its direct-drive extruder and IFS switching mechanism handle \u003cstrong\u003eTPU 95A\u003c\/strong\u003e (a medium-firmness flexible filament) in multicolor — enabling soft parts, wearables, figurines, and flexible components with color variation that was not previously achievable at this price point.\u003c\/p\u003e\n\u003cp\u003eIt also supports \u003cstrong\u003eTPU 64D\u003c\/strong\u003e for firmer flexible prints, giving you a broader range of hardness options within the same machine.\u003c\/p\u003e\n\u003ch3\u003e4 Spools Side by Side — Storage Built Into the Printer\u003c\/h3\u003e\n\u003cp\u003eMost multi-filament systems stack spools vertically or require a separate shelf. The AD5X arranges \u003cstrong\u003efour spools horizontally side by side\u003c\/strong\u003e on an integrated holder — keeping the printer's footprint compact and allowing it to sit flush against a wall or in a tighter workspace than a comparable machine with an external feed system.\u003c\/p\u003e\n\u003cp\u003eWhen printing single-color models and one spool runs out mid-print, the IFS automatically switches to the next loaded spool and continues — no pauses, no failed prints from running out of filament.\u003c\/p\u003e\n\u003ch3\u003eCoreXY at 300 mm\/s — Fast Enough to Matter\u003c\/h3\u003e\n\u003cp\u003eSpeed on a 3D printer is only useful if the print still looks good. The AD5X achieves \u003cstrong\u003e300 mm\/s print speed\u003c\/strong\u003e and \u003cstrong\u003e600 mm\/s travel speed\u003c\/strong\u003e through two systems working together:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoreXY motion:\u003c\/strong\u003e Two motors move the print head in X and Y together while the bed only moves on Z. Less moving mass means less vibration at high speed — which is why CoreXY printers can go faster without producing wavy, artifact-covered surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration compensation:\u003c\/strong\u003e A software algorithm measures the printer's resonance frequencies and cancels them out in real time. The result is smooth surfaces at speeds that would cause visible ringing artifacts on printers without this system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAuto-Leveling + 99% Power Loss Recovery\u003c\/h3\u003e\n\u003cp\u003eThe AD5X uses a pressure sensor under the bed to map the build plate surface before every print — automatically compensating for any tilt or unevenness. \u003cstrong\u003eNo manual leveling, ever.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf the power goes out mid-print, \u003cstrong\u003e99% of the time\u003c\/strong\u003e the printer resumes from exactly where it stopped. CoreXY's balanced dual-motor motion system stabilizes the print head position after a power loss better than single-motor Cartesian designs — which is why Flashforge can quote that success rate with confidence.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint Technology\u003c\/td\u003e\n\u003ctd\u003eFDM — CoreXY all-metal frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor System\u003c\/td\u003e\n\u003ctd\u003eIFS (Intelligent Filament System) — 4 colors, built-in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Extruders\u003c\/td\u003e\n\u003ctd\u003e1 (single nozzle, multi-filament feed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Volume\u003c\/td\u003e\n\u003ctd\u003e220 × 220 × 220 mm (8.7\" × 8.7\" × 8.7\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint Speed\u003c\/td\u003e\n\u003ctd\u003eUp to 300 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTravel Speed\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Acceleration\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Extruder Temperature\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Bed Temperature\u003c\/td\u003e\n\u003ctd\u003e110°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Plate\u003c\/td\u003e\n\u003ctd\u003eFlexible PEI steel plate (magnetic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eOpen frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeveling\u003c\/td\u003e\n\u003ctd\u003eFully automatic (pressure sensor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVibration Compensation\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eQuick-release (30% lower replacement cost vs. previous gen)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Runout Detection\u003c\/td\u003e\n\u003ctd\u003eYes — auto-switches to next spool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Loss Recovery\u003c\/td\u003e\n\u003ctd\u003eYes — 99% resume success rate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamera\u003c\/td\u003e\n\u003ctd\u003eBuilt-in (remote monitoring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTouch Screen\u003c\/td\u003e\n\u003ctd\u003e4.3\" color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eUSB, Wi-Fi (5G + 2.4G), Ethernet, Cloud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMCU\u003c\/td\u003e\n\u003ctd\u003eDual-core Cortex-A53 \/ 8GB built-in storage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Software\u003c\/td\u003e\n\u003ctd\u003eOrca-Flashforge, FlashPrint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eAC 100–240V \/ 50–60Hz \/ 650W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePrint Settings Reference\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003cth\u003eExtruder Temp\u003c\/th\u003e\n\u003cth\u003eBed Temp\u003c\/th\u003e\n\u003cth\u003eSpeed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePLA \/ PLA Silk \/ PLA Matte\u003c\/td\u003e\n\u003ctd\u003e190–220°C\u003c\/td\u003e\n\u003ctd\u003e50–60°C\u003c\/td\u003e\n\u003ctd\u003eUp to 300 mm\/s\u003c\/td\u003e\n\u003ctd\u003eBest material for multicolor — clean transitions, easy purge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePETG \/ PETG Pro \/ HS PETG\u003c\/td\u003e\n\u003ctd\u003e230–250°C\u003c\/td\u003e\n\u003ctd\u003e70–85°C\u003c\/td\u003e\n\u003ctd\u003e150–250 mm\/s\u003c\/td\u003e\n\u003ctd\u003eReduce cooling fan; excellent for functional multicolor parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eASA\u003c\/td\u003e\n\u003ctd\u003e240–260°C\u003c\/td\u003e\n\u003ctd\u003e90–105°C\u003c\/td\u003e\n\u003ctd\u003e100–200 mm\/s\u003c\/td\u003e\n\u003ctd\u003eUV-resistant; open frame may cause warping on large parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPU 95A (flexible)\u003c\/td\u003e\n\u003ctd\u003e220–240°C\u003c\/td\u003e\n\u003ctd\u003e30–50°C\u003c\/td\u003e\n\u003ctd\u003e30–60 mm\/s\u003c\/td\u003e\n\u003ctd\u003eSlow down significantly for TPU; minimal retraction; expect higher purge waste in multicolor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPU 64D (semi-rigid)\u003c\/td\u003e\n\u003ctd\u003e230–245°C\u003c\/td\u003e\n\u003ctd\u003e40–55°C\u003c\/td\u003e\n\u003ctd\u003e50–100 mm\/s\u003c\/td\u003e\n\u003ctd\u003eFirmer than 95A; slightly more forgiving at higher speeds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatible Filaments\u003c\/h3\u003e\n\u003cp\u003ePLA · PLA Pro · HS PLA · PLA Matte · PLA Silk · PETG · PETG Pro · HS PETG · ASA · TPU 95A · TPU 64D\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOpen filament system — compatible with third-party brands including Sunlu, Anycubic, Overture, and others.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFlashforge AD5X\u003c\/strong\u003e is built for makers, creators, and educators who want to print in color — not just in one color — without having to manage a complex multi-machine setup or spend hours calibrating an external filament switching system:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakers and hobbyists ready to go multicolor\u003c\/strong\u003e — if you have been printing single-color models and want to step into full-color printing without a steep learning curve, the IFS system makes the transition as simple as loading four spools and clicking print\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharacter and figure makers\u003c\/strong\u003e who want skin tones, clothing colors, and detail painted directly into the print — no post-processing brush work required for color separation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible and wearable creators\u003c\/strong\u003e who need multicolor TPU — phone cases, wristbands, soft figurines, cosplay accessories — and have been frustrated by the lack of a printer that handles this at consumer pricing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducators and classrooms\u003c\/strong\u003e that want to produce engaging, colorful models for science, engineering, and art projects without the complexity and maintenance of industrial color systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigners and prototypers\u003c\/strong\u003e using color to communicate part functionality — color-coding assemblies, highlighting stress zones, or differentiating components in multi-part prototypes without painting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse our full selection of \u003ca href=\"\/collections\/fdm-3d-printers\"\u003eFDM 3D printers\u003c\/a\u003e or explore our \u003ca href=\"\/collections\/high-speed-3d-printers\"\u003ehigh-speed 3D printers\u003c\/a\u003e to compare all available models at Supplies 3D.\u003c\/p\u003e","brand":"Machine Horizon","offers":[{"title":"AD5X","offer_id":52771626352934,"sku":"AD5X","price":339.0,"currency_code":"USD","in_stock":true},{"title":"AD5X + Enclosure Kit","offer_id":52771626385702,"sku":"AD5XE","price":408.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/220000_82e10b74-1406-4d3b-a227-cbfffd421b4b.jpg?v=1773845512"},{"product_id":"flashforge-adventurer-5m-3d-printer","title":"Flashforge Adventurer 5M 3D Printer","description":"\u003c!-- ============================================================\n     SUPPLIES3D.SHOP — PRODUCT DESCRIPTION\n     Product : Flashforge Adventurer 5M (AD5M — Base Model)\n     Silo    : Silo 2 — 3D Printers\n     Tags    : #fdm-printer · #high-speed-printer · #budget-printer\n     NOTE    : Positioned clearly vs AD5M Pro already in catalog.\n               Key deltas: no enclosure, no HEPA, no camera,\n               fewer materials, lighter, lower price point.\n     ============================================================ --\u003e\n\u003ch2\u003eHigh-Speed FDM 3D Printer | 300 mm\/s | Direct Drive | PLA, PETG \u0026amp; TPU\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eFlashforge Adventurer 5M\u003c\/strong\u003e (AD5M) is a high-speed FDM 3D printer that prints at \u003cstrong\u003e300 mm\/s\u003c\/strong\u003e — up to 4–6× faster than a typical beginner printer — at a price that makes this level of performance genuinely accessible. It comes with auto-leveling, a quick-release direct-drive nozzle, vibration compensation, and a PEI magnetic build plate, all out of the box.\u003c\/p\u003e\n\u003cp\u003eIf you print primarily in \u003cstrong\u003ePLA, PETG, TPU, or carbon fiber composite variants\u003c\/strong\u003e of those materials, and you want a fast, reliable machine that does not require enclosures, special ventilation, or advanced setup, the Adventurer 5M delivers everything you need without paying for features you will never use.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e⚠️ Important — Read Before Printing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen frame — no enclosure:\u003c\/strong\u003e The AD5M does not have a sealed build chamber. It is optimized for PLA, PETG, and TPU. ABS and ASA, which need a warm enclosed environment to prevent warping, are not supported on this model. If you need ABS\/ASA\/PA\/PC printing, see the \u003ca href=\"\/collections\/fdm-3d-printers\"\u003eAdventurer 5M Pro\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCF and GF composite filaments require a hardened nozzle:\u003c\/strong\u003e PLA-CF and PETG-CF are supported, but only with the 0.6 mm or 0.8 mm optional nozzle — not the standard 0.4 mm brass nozzle. Abrasive particles in CF filaments wear a standard nozzle within a few prints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPU printing tips:\u003c\/strong\u003e TPU works on the AD5M but requires slower speeds (30–50 mm\/s), minimal retraction, and direct-drive configuration — all of which this printer handles well by design. Do not try to print TPU at full speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilation still recommended:\u003c\/strong\u003e Even with PLA — the most benign FDM material — printing in a well-ventilated area is good practice for extended sessions. PETG and composite filaments produce more fumes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament included is a sample only:\u003c\/strong\u003e The box includes 50g of PLA — enough for a few test prints. Have a full spool ready before your first real job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eSame Speed as the Pro. Simpler Machine. Lower Price.\u003c\/h3\u003e\n\u003cp\u003eThe AD5M and the AD5M Pro share the same CoreXY motion system, the same 300 mm\/s print speed, the same direct-drive nozzle, and the same ADM auto-leveling. The difference is what surrounds the print:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe \u003cstrong\u003eAD5M Pro\u003c\/strong\u003e adds a fully enclosed chamber, HEPA + activated carbon air filtration, a built-in camera, and support for ABS, ASA, PA, PC, and HIPS\u003c\/li\u003e\n\u003cli\u003eThe \u003cstrong\u003eAD5M\u003c\/strong\u003e is open-frame, with no filtration system and no camera — and is significantly lighter and more affordable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your material list is PLA, PETG, TPU, PLA-CF, and PETG-CF, \u003cstrong\u003ethe AD5M gives you 100% of the speed and precision at a fraction of the cost\u003c\/strong\u003e of machines with enclosures and filtration systems you do not need for those materials.\u003c\/p\u003e\n\u003ch3\u003e300 mm\/s — What That Speed Feels Like in Practice\u003c\/h3\u003e\n\u003cp\u003eA standard beginner printer runs at 40–80 mm\/s. Imagine printing a part that normally takes 4 hours. At 300 mm\/s, that same part finishes in about 60–90 minutes. That is not an exaggeration — that is the actual time difference you will experience on typical models.\u003c\/p\u003e\n\u003cp\u003eThe AD5M achieves this without producing wavy or artifact-covered prints because of two things working together:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoreXY motion:\u003c\/strong\u003e Think of it like moving a pen in all directions above a fixed table, instead of sliding the table back and forth. Less moving mass = less vibration at high speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration compensation:\u003c\/strong\u003e A software algorithm measures the printer's natural wobble frequencies and cancels them out — the same way noise-canceling headphones cancel sound. You get smooth surfaces even at speeds that would rattle a conventional printer apart.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDirect-Drive Nozzle — Ready in 35 Seconds, Swappable in Seconds\u003c\/h3\u003e\n\u003cp\u003eThe AD5M uses a \u003cstrong\u003edirect-drive extruder\u003c\/strong\u003e — the motor that pushes filament sits directly above the nozzle. This matters especially for TPU: flexible filaments buckle and jam in long feed tubes, but a short direct path to the nozzle handles them cleanly.\u003c\/p\u003e\n\u003cp\u003eThe nozzle reaches \u003cstrong\u003e200°C in 35 seconds\u003c\/strong\u003e from cold — no long wait before you can start printing. And when you want to switch from a 0.4 mm nozzle to a 0.6 mm or 0.8 mm for composite materials, the \u003cstrong\u003equick-release system\u003c\/strong\u003e lets you do it in seconds without tools, without burns, and without downtime.\u003c\/p\u003e\n\u003ch3\u003eADM Auto-Leveling — Perfect First Layers Without Manual Work\u003c\/h3\u003e\n\u003cp\u003eThe most common reason for a failed print is a bad first layer. Usually it happens because the distance between the nozzle and the build plate is not consistent — one corner is slightly higher than another, and the first lines of filament either float in the air or get squashed flat.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAutomatic Datum Management (ADM)\u003c\/strong\u003e system maps the entire build plate surface before every print and adjusts in real time. No manual leveling knobs. No re-calibrating every few weeks. Just load your file, press print, and watch clean first layers appear every time.\u003c\/p\u003e\n\u003ch3\u003ePEI Double-Sided Magnetic Build Plate\u003c\/h3\u003e\n\u003cp\u003eThe build plate is coated with \u003cstrong\u003ePEI (Polyetherimide)\u003c\/strong\u003e on both sides — a surface that grips PLA, PETG, and TPU firmly at printing temperature, then releases the finished part cleanly once it cools. To remove a print, flex the magnetic plate slightly and parts pop off without scraping, prying, or damaging the surface.\u003c\/p\u003e\n\u003cp\u003eDouble-sided means you can flip the plate to a fresh surface when one side needs cleaning or has wear — doubling the effective lifespan before a replacement is needed.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint Technology\u003c\/td\u003e\n\u003ctd\u003eFFF \/ FDM — CoreXY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Volume\u003c\/td\u003e\n\u003ctd\u003e220 × 220 × 220 mm (8.7\" × 8.7\" × 8.7\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint Speed\u003c\/td\u003e\n\u003ctd\u003eUp to 300 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTravel Speed (Extruder)\u003c\/td\u003e\n\u003ctd\u003eUp to 600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAcceleration\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint Precision\u003c\/td\u003e\n\u003ctd\u003e±0.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition Precision X\/Y\u003c\/td\u003e\n\u003ctd\u003e0.025 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition Precision Z\u003c\/td\u003e\n\u003ctd\u003e0.0025 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Thickness\u003c\/td\u003e\n\u003ctd\u003e0.1 – 0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder Type\u003c\/td\u003e\n\u003ctd\u003eDirect Drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Extruder Temperature\u003c\/td\u003e\n\u003ctd\u003e280°C (536°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Warmup Time\u003c\/td\u003e\n\u003ctd\u003e200°C in 35 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Diameter\u003c\/td\u003e\n\u003ctd\u003e0.4 mm standard \/ 0.25, 0.6, 0.8 mm optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Bed Temperature\u003c\/td\u003e\n\u003ctd\u003e110°C (230°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Plate\u003c\/td\u003e\n\u003ctd\u003ePEI double-sided magnetic flex plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eOpen frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir Filtration\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamera\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeveling\u003c\/td\u003e\n\u003ctd\u003eAutomatic (ADM system)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVibration Compensation\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTouch Screen\u003c\/td\u003e\n\u003ctd\u003e4.3\" color LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eUSB, Wi-Fi, Ethernet, Cloud printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Software\u003c\/td\u003e\n\u003ctd\u003eFlashPrint, Polar Cloud, Cura\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFile Input Formats\u003c\/td\u003e\n\u003ctd\u003eSTL \/ 3MF \/ OBJ \/ FPP \/ BMP \/ PNG \/ JPEG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eAC 100–240V \/ DC 24V \/ 13.3A \/ 320W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine Dimensions\u003c\/td\u003e\n\u003ctd\u003e363 × 376 × 413 mm (14\" × 15\" × 16\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e24 lbs (10.8 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePrint Settings Reference\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003cth\u003eExtruder Temp\u003c\/th\u003e\n\u003cth\u003eBed Temp\u003c\/th\u003e\n\u003cth\u003eSpeed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePLA\u003c\/td\u003e\n\u003ctd\u003e190–220°C\u003c\/td\u003e\n\u003ctd\u003e50–60°C\u003c\/td\u003e\n\u003ctd\u003eUp to 300 mm\/s\u003c\/td\u003e\n\u003ctd\u003eEasiest material — ideal for first prints and daily use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePLA-CF\u003c\/td\u003e\n\u003ctd\u003e200–230°C\u003c\/td\u003e\n\u003ctd\u003e55–65°C\u003c\/td\u003e\n\u003ctd\u003eUp to 250 mm\/s\u003c\/td\u003e\n\u003ctd\u003eRequires 0.6 mm or 0.8 mm hardened nozzle — abrasive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePETG\u003c\/td\u003e\n\u003ctd\u003e230–250°C\u003c\/td\u003e\n\u003ctd\u003e70–85°C\u003c\/td\u003e\n\u003ctd\u003e150–250 mm\/s\u003c\/td\u003e\n\u003ctd\u003eReduce cooling fan; stronger and more heat-resistant than PLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePETG-CF\u003c\/td\u003e\n\u003ctd\u003e240–255°C\u003c\/td\u003e\n\u003ctd\u003e80–90°C\u003c\/td\u003e\n\u003ctd\u003e150–220 mm\/s\u003c\/td\u003e\n\u003ctd\u003eRequires 0.6 mm or 0.8 mm hardened nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPU (0.4 mm nozzle)\u003c\/td\u003e\n\u003ctd\u003e220–235°C\u003c\/td\u003e\n\u003ctd\u003e30–45°C\u003c\/td\u003e\n\u003ctd\u003e30–60 mm\/s\u003c\/td\u003e\n\u003ctd\u003eSlow down significantly; minimal retraction; direct drive handles TPU well\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdventurer 5M 3D Printer\u003c\/li\u003e\n\u003cli\u003e50g PLA Filament (sample)\u003c\/li\u003e\n\u003cli\u003ePower Cord\u003c\/li\u003e\n\u003cli\u003eUSB Drive\u003c\/li\u003e\n\u003cli\u003eLeveling Tool\u003c\/li\u003e\n\u003cli\u003eFilament Holder\u003c\/li\u003e\n\u003cli\u003eScrewdriver, Hex Wrench Set, Pliers\u003c\/li\u003e\n\u003cli\u003eGrease\u003c\/li\u003e\n\u003cli\u003eGlue (for bed adhesion)\u003c\/li\u003e\n\u003cli\u003eQuick Start Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFlashforge Adventurer 5M\u003c\/strong\u003e is for anyone who wants a fast, reliable printer that is ready to run without complexity, without setup headaches, and without spending money on features their workflow does not require:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirst-time buyers stepping up from entry-level printers\u003c\/strong\u003e — the ADM auto-leveling, quick-release nozzle, and FlashPrint software eliminate the most frustrating parts of learning FDM printing, so you spend your time printing, not troubleshooting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakers and hobbyists printing PLA and PETG daily\u003c\/strong\u003e — if these two materials cover 90% of what you print, the AD5M gives you professional-level speed at a consumer price without paying for an enclosed chamber and filtration system that sits unused\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudents, educators, and classrooms\u003c\/strong\u003e that need reliable results from lesson to lesson — auto-leveling means no reset ritual before each student's print, and the fast speed means more prints fit within a class period\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigners and prototypers running quick iteration cycles\u003c\/strong\u003e — at 300 mm\/s, you can run 3–4 design iterations in the same time a standard printer takes to finish one, which accelerates the feedback loop dramatically\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHome office users\u003c\/strong\u003e who want the printer on a desk without needing to worry about ABS fumes or enclosure heat — PLA and PETG on an open-frame printer in a ventilated room is a practical, low-fuss setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed engineering materials, air filtration, or a built-in camera for remote monitoring? Explore the \u003ca href=\"\/collections\/fdm-3d-printers\"\u003eAdventurer 5M Pro\u003c\/a\u003e or browse our full \u003ca href=\"\/collections\/high-speed-3d-printers\"\u003ehigh-speed 3D printer collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Machine Horizon","offers":[{"title":"AD5M","offer_id":52771626418470,"sku":"DLZ-AD5M-1","price":239.0,"currency_code":"USD","in_stock":true},{"title":"AD5M + Enclosure Kit","offer_id":52771626451238,"sku":"AD5M + Enclosure Kit","price":274.0,"currency_code":"USD","in_stock":true},{"title":"AD5M + 2 HS PLA","offer_id":52771626484006,"sku":"DLZ-AD5M-2","price":279.0,"currency_code":"USD","in_stock":true},{"title":"AD5M + 4 PLA (Everyday Color)","offer_id":52771626516774,"sku":"DLZ-AD5M-3","price":319.0,"currency_code":"USD","in_stock":true},{"title":"AD5M + 12 PLA Basic (Everyday Color)","offer_id":52771626549542,"sku":"AD5M + 12 PLA Basic","price":437.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/5M_1x_11956bbe-6200-4162-a238-6bd4302d307d.png?v=1773845512"},{"product_id":"flashforge-guider-3-ultra-3d-printer","title":"Flashforge Guider 3 Ultra 3D Printer","description":"\u003c!-- ============================================================\n     SUPPLIES3D.SHOP — PRODUCT DESCRIPTION\n     Product : Flashforge Guider 3 Ultra\n     Silo    : Silo 2 — 3D Printers\n     Tags    : #fdm-printer · #large-format-printer\n               #high-speed-printer · #professional-printer\n     ============================================================ --\u003e\n\u003ch2\u003eLarge-Format Dual-Extruder FDM 3D Printer | CoreXY | 330 × 330 × 600 mm | 350°C\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eFlashforge Guider 3 Ultra\u003c\/strong\u003e is a professional-grade, large-format FDM 3D printer built around a \u003cstrong\u003eCoreXY motion system\u003c\/strong\u003e with dual extruders, a \u003cstrong\u003e330 × 330 × 600 mm build volume\u003c\/strong\u003e, and a maximum extruder temperature of \u003cstrong\u003e350°C\u003c\/strong\u003e. It is engineered to run continuously — 24 hours a day, 7 days a week — printing everything from standard PLA to high-performance carbon fiber-reinforced composites, without slowing down or breaking down.\u003c\/p\u003e\n\u003cp\u003eIf your work requires large parts, engineering materials, complex geometries with support structures, or consistent output over long unattended print sessions, the Guider 3 Ultra is built for exactly that.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e⚠️ Important — Read Before Printing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo heated chamber:\u003c\/strong\u003e The Guider 3 Ultra does not include a chamber heater. For high-temperature engineering materials like PC and PA that require full thermal enclosure, large parts (above approximately 250 × 250 × 250 mm) may experience warping. Plan part orientation and material selection accordingly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight and placement:\u003c\/strong\u003e This printer weighs \u003cstrong\u003e70 kg (154 lbs)\u003c\/strong\u003e and measures 635 × 550 × 1070 mm. Plan your workspace before purchase — it ships on a pallet and requires at least two people to position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament loading from the rear:\u003c\/strong\u003e The filament chambers are accessed from the back of the machine. If you plan to place the printer against a wall, leave at least 30 cm of clearance at the rear for filament access and maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasive filaments require hardened nozzles:\u003c\/strong\u003e CF and GF composite filaments (PA-CF, PETG-CF, PAHT-CF, etc.) will wear a standard brass nozzle rapidly. Use a hardened steel or ruby nozzle for these materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial switching protocol:\u003c\/strong\u003e When switching between incompatible materials (e.g., PETG after PLA, or any high-temp composite after a standard filament), follow the software purge sequence exactly. The extruder will guide you — skip this step and you risk contaminated extrusion and blocked nozzles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e The printer draws up to 850W peak. Verify your outlet and circuit can handle this load before first use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat Is CoreXY — and Why Does It Matter?\u003c\/h3\u003e\n\u003cp\u003eMost desktop 3D printers move the print head on one axis and the bed on another. Simple, but slow — the heavier the bed, the slower it needs to move to stay accurate.\u003c\/p\u003e\n\u003cp\u003eThe Guider 3 Ultra uses a \u003cstrong\u003eCoreXY system\u003c\/strong\u003e, where two motors work together through a belt arrangement to move the print head in both X and Y directions — while the bed only moves straight down on the Z axis. Think of it like this: instead of pushing a heavy table back and forth, you only move a lightweight pen in any direction above it.\u003c\/p\u003e\n\u003cp\u003eThe result: \u003cstrong\u003eless mass moving at high speed = less vibration = better accuracy at higher speeds.\u003c\/strong\u003e The Guider 3 Ultra reaches a maximum print speed of \u003cstrong\u003e500 mm\/s\u003c\/strong\u003e with \u003cstrong\u003e20,000 mm\/s² acceleration\u003c\/strong\u003e — numbers that would shake a conventional Cartesian printer apart — while maintaining a printing precision of \u003cstrong\u003e±0.15 mm\u003c\/strong\u003e and a Z-axis position precision of just \u003cstrong\u003e0.0025 mm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003e600 mm Tall — What You Can Actually Build\u003c\/h3\u003e\n\u003cp\u003eThe build volume is what separates this printer from the desktop category entirely. At \u003cstrong\u003e330 × 330 × 600 mm\u003c\/strong\u003e in single-extruder mode, you can print:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull helmet shells and large cosplay props in one piece\u003c\/li\u003e\n\u003cli\u003eIndustrial jigs, fixtures, and tooling that are too large for standard printers\u003c\/li\u003e\n\u003cli\u003eArchitectural models and scale structures at significant real-world sizes\u003c\/li\u003e\n\u003cli\u003eFunctional enclosures, brackets, and housing units for prototyping\u003c\/li\u003e\n\u003cli\u003eBatch production of smaller parts — up to \u003cstrong\u003e2,000 grams of material per day\u003c\/strong\u003e in continuous operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn \u003cstrong\u003edual-extruder mode\u003c\/strong\u003e the X axis reduces to 300 mm (to accommodate the second nozzle park position), but you gain the ability to print with two materials simultaneously — the most important use being soluble support material.\u003c\/p\u003e\n\u003ch3\u003eDual Extruders — The Right Tool for Complex Geometry\u003c\/h3\u003e\n\u003cp\u003eA single extruder printer uses the same material for both the model and its supports. Removing those supports always leaves marks, requires manual work, and can damage fine details.\u003c\/p\u003e\n\u003cp\u003eWith dual extruders, the Guider 3 Ultra can print supports in a \u003cstrong\u003edifferent material than the model\u003c\/strong\u003e — for example, water-soluble PVA or HIPS supports under a PLA or ABS model. When the print is done, you dissolve or peel the supports away cleanly, leaving behind a surface finish you could not achieve with single-material supports.\u003c\/p\u003e\n\u003cp\u003eAlternatively, both extruders can run the \u003cstrong\u003esame material\u003c\/strong\u003e — which the Guider 3 Ultra uses intelligently to cut model print time by approximately \u003cstrong\u003e70%\u003c\/strong\u003e on support-heavy jobs, by using a same-material raft support system that requires fewer extruder switches and less purge time between changes.\u003c\/p\u003e\n\u003cp\u003eThe dual extruder system has also been tested to \u003cstrong\u003e100,000 switching cycles\u003c\/strong\u003e without measurable vibration or alignment degradation — it is built for production volume, not just occasional use.\u003c\/p\u003e\n\u003ch3\u003eSealed Filament Drying Chambers — Moisture Is the Enemy\u003c\/h3\u003e\n\u003cp\u003eHere is something most printer listings will not explain clearly: \u003cstrong\u003emoisture destroys print quality.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEngineering filaments like PA (nylon), PAHT-CF, and PA-GF absorb humidity from the air within hours. When a wet filament is extruded, the moisture vaporizes inside the nozzle, creating micro-bubbles in the extrusion — which shows up as stringing, rough surfaces, weak layer adhesion, and popping sounds during printing.\u003c\/p\u003e\n\u003cp\u003eThe Guider 3 Ultra includes \u003cstrong\u003etwo sealed filament chambers\u003c\/strong\u003e with built-in hygrometers (humidity gauges) and desiccant storage. Your filament stays dry from the moment you load it to the moment the print finishes — without a separate filament dryer running on your desk. For labs and workshops printing PA, PAHT-CF, or PA-GF regularly, this is a significant operational advantage.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Overnight and Unattended Production\u003c\/h3\u003e\n\u003cp\u003eThe Guider 3 Ultra includes every system needed to start a long print job and walk away with confidence:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto bed leveling:\u003c\/strong\u003e Full automatic compensation before every print — no manual tramming, no drift over time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament runout detection + automatic extruder switching:\u003c\/strong\u003e When one spool runs out mid-print, the printer automatically switches to the second extruder and continues — no failed print, no wasted hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower loss recovery:\u003c\/strong\u003e If the power goes out, the printer remembers exactly where it was and resumes from that point when power returns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto power-off:\u003c\/strong\u003e Print finishes at 2 AM — the printer shuts itself down, safely. Pick it up in the morning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in HD camera:\u003c\/strong\u003e Monitor progress remotely via the FlashMaker app (iOS\/Android) — check on overnight jobs, verify first layers stuck, catch failures before they waste a full spool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHEPA 13 air filtration:\u003c\/strong\u003e Captures ultrafine particles and VOCs — the same filtration grade used in medical and cleanroom environments — making extended operation in shared workspaces safe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuick-Release Nozzle — 3-Second Tool-Free Swap\u003c\/h3\u003e\n\u003cp\u003eChanging nozzle diameter (0.4 → 0.6 → 0.8 mm) or replacing a worn nozzle after heavy composite printing takes \u003cstrong\u003e3 seconds\u003c\/strong\u003e with the quick-release system — no tools, no burns from wrestling with a hot block with pliers. For a printer running production volumes of abrasive CF\/GF filaments, this is not a convenience feature. It is a maintenance necessity.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint Technology\u003c\/td\u003e\n\u003ctd\u003eFDM — CoreXY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Volume (Single Extruder)\u003c\/td\u003e\n\u003ctd\u003e330 × 330 × 600 mm (13\" × 13\" × 23.6\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Volume (Dual Extruder)\u003c\/td\u003e\n\u003ctd\u003e300 × 330 × 600 mm (11.8\" × 13\" × 23.6\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Extruders\u003c\/td\u003e\n\u003ctd\u003e2 (dual)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Print Speed\u003c\/td\u003e\n\u003ctd\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Travel Speed\u003c\/td\u003e\n\u003ctd\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAcceleration\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinting Precision\u003c\/td\u003e\n\u003ctd\u003e±0.15 mm or ±0.002 mm\/mm (whichever is larger)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition Precision X\/Y\u003c\/td\u003e\n\u003ctd\u003e0.011 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition Precision Z\u003c\/td\u003e\n\u003ctd\u003e0.0025 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Thickness\u003c\/td\u003e\n\u003ctd\u003e0.05 – 0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Extruder Temperature\u003c\/td\u003e\n\u003ctd\u003e350°C (662°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Bed Temperature\u003c\/td\u003e\n\u003ctd\u003e120°C (248°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChamber Heater\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Plate\u003c\/td\u003e\n\u003ctd\u003eFlexible PEI steel plate (magnetic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Diameter\u003c\/td\u003e\n\u003ctd\u003e0.4 mm standard \/ 0.6 mm, 0.8 mm optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Type\u003c\/td\u003e\n\u003ctd\u003eHigh-strength \/ quick-release (3-second swap)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Chambers\u003c\/td\u003e\n\u003ctd\u003e2 sealed chambers with hygrometer + desiccant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir Filtration\u003c\/td\u003e\n\u003ctd\u003eHEPA 13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeveling\u003c\/td\u003e\n\u003ctd\u003eFully automatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamera\u003c\/td\u003e\n\u003ctd\u003eBuilt-in HD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Runout\u003c\/td\u003e\n\u003ctd\u003eAuto-detection + auto extruder switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Loss Recovery\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuto Power-Off\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eUSB, Wi-Fi, Ethernet, Cloud (FlashMaker app)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Software\u003c\/td\u003e\n\u003ctd\u003eFlashPrint, Orca-Flashforge, Cura, Slic3r\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFile Formats\u003c\/td\u003e\n\u003ctd\u003eSTL \/ OBJ \/ 3MF \/ FPP \/ BMP \/ PNG \/ JPG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eAC 100–240V \/ 50–60Hz \/ 850W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine Dimensions\u003c\/td\u003e\n\u003ctd\u003e635 × 550 × 1070 mm (25\" × 21.7\" × 42\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e70 kg (154 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 year (printer) \/ 3 months (extruder parts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePrint Settings Reference\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003cth\u003eExtruder Temp\u003c\/th\u003e\n\u003cth\u003eBed Temp\u003c\/th\u003e\n\u003cth\u003eSpeed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePLA \/ PLA-CF\u003c\/td\u003e\n\u003ctd\u003e190–230°C\u003c\/td\u003e\n\u003ctd\u003e50–65°C\u003c\/td\u003e\n\u003ctd\u003eUp to 500 mm\/s\u003c\/td\u003e\n\u003ctd\u003ePLA-CF: use hardened nozzle; abrasive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePETG \/ PETG-CF \/ PETG-GF\u003c\/td\u003e\n\u003ctd\u003e230–255°C\u003c\/td\u003e\n\u003ctd\u003e70–90°C\u003c\/td\u003e\n\u003ctd\u003e150–350 mm\/s\u003c\/td\u003e\n\u003ctd\u003eCF\/GF variants: hardened nozzle required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eABS \/ ASA\u003c\/td\u003e\n\u003ctd\u003e230–260°C\u003c\/td\u003e\n\u003ctd\u003e90–110°C\u003c\/td\u003e\n\u003ctd\u003e100–350 mm\/s\u003c\/td\u003e\n\u003ctd\u003eEnclosed build area helps; no chamber heater — minimize drafts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePA \/ PA-CF \/ PA-GF \/ PA12-CF\u003c\/td\u003e\n\u003ctd\u003e250–290°C\u003c\/td\u003e\n\u003ctd\u003e70–90°C\u003c\/td\u003e\n\u003ctd\u003e80–200 mm\/s\u003c\/td\u003e\n\u003ctd\u003eUse sealed drying chambers; highly moisture-sensitive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePAHT-CF \/ PAHT-GF\u003c\/td\u003e\n\u003ctd\u003e280–340°C\u003c\/td\u003e\n\u003ctd\u003e90–110°C\u003c\/td\u003e\n\u003ctd\u003e60–150 mm\/s\u003c\/td\u003e\n\u003ctd\u003eHigh-temp nylon composites; dry filament mandatory; hardened nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePC (Polycarbonate)\u003c\/td\u003e\n\u003ctd\u003e260–310°C\u003c\/td\u003e\n\u003ctd\u003e100–120°C\u003c\/td\u003e\n\u003ctd\u003e60–150 mm\/s\u003c\/td\u003e\n\u003ctd\u003eNo chamber heater limits full-size PC parts; works well up to ~250mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePET-CF \/ PET-GF\u003c\/td\u003e\n\u003ctd\u003e250–270°C\u003c\/td\u003e\n\u003ctd\u003e80–95°C\u003c\/td\u003e\n\u003ctd\u003e100–250 mm\/s\u003c\/td\u003e\n\u003ctd\u003eHardened nozzle required; excellent stiffness-to-weight ratio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHIPS\u003c\/td\u003e\n\u003ctd\u003e220–240°C\u003c\/td\u003e\n\u003ctd\u003e90–110°C\u003c\/td\u003e\n\u003ctd\u003e100–200 mm\/s\u003c\/td\u003e\n\u003ctd\u003eUse as soluble support for ABS with dual extruder; dissolves in limonene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoPA\u003c\/td\u003e\n\u003ctd\u003e250–270°C\u003c\/td\u003e\n\u003ctd\u003e70–90°C\u003c\/td\u003e\n\u003ctd\u003e80–180 mm\/s\u003c\/td\u003e\n\u003ctd\u003eDry before printing; excellent chemical resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatible Filament Materials\u003c\/h3\u003e\n\u003cp\u003ePLA · PLA-CF · PETG · PETG-CF · PETG-GF · ABS · ASA · HIPS · PC · PA · PA-CF · PA-GF · PA12-CF · PAHT-CF · PAHT-GF · PET-CF · PET-GF · CoPA · NexPA-CF25\u003c\/p\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFlashforge Guider 3 Ultra\u003c\/strong\u003e is not a printer you buy because it is the next step up from your desktop machine. It is a printer you buy when your work has outgrown what desktop machines can do:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eR\u0026amp;D teams and engineering departments\u003c\/strong\u003e that need to prototype large assemblies, functional structural parts, and composite components in PA-CF, PAHT-CF, or PET-GF — materials that require 350°C and a stable build environment to print reliably\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing and small-batch production\u003c\/strong\u003e environments running the printer 24\/7, producing 2,000g+ of material per day, and needing the auto-switching, power recovery, and auto shut-off features to actually deliver on that throughput\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService bureaus and print farms\u003c\/strong\u003e that need cluster management — the FlashMaker app and cloud platform allow multi-printer management, remote monitoring, and job queuing from anywhere\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCosplay makers, prop builders, and artists\u003c\/strong\u003e who regularly hit the size limits of standard printers and spend hours gluing together split parts — the 600mm build height eliminates most of those splits entirely\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducational institutions and maker labs\u003c\/strong\u003e investing in a single professional machine that handles every filament type their curriculum demands, with HEPA 13 filtration to keep the workspace safe during intensive use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse our complete \u003ca href=\"\/collections\/large-format-3d-printers\"\u003elarge-format 3D printer collection\u003c\/a\u003e or explore all \u003ca href=\"\/collections\/professional-3d-printers\"\u003eprofessional 3D printers\u003c\/a\u003e at Supplies 3D.\u003c\/p\u003e","brand":"Machine Horizon","offers":[{"title":"Default Title","offer_id":52771626582310,"sku":"DLZ-G3U-1","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/img_v3_02jj_1e8e7171-2c05-4968-8d7c-5f027e3bd8bg.jpg?v=1773845517"},{"product_id":"flashforge-adventurer-5m-pro","title":"Flashforge Adventurer 5M Pro","description":"\u003c!-- ============================================================\n     SUPPLIES3D.SHOP — PRODUCT DESCRIPTION\n     Product : Flashforge Adventurer 5M Pro\n     Tags    : #fdm-printer · #high-speed-printer\n     ============================================================ --\u003e\n\u003ch2\u003eHigh-Speed Enclosed FDM 3D Printer | 300 mm\/s | Engineering \u0026amp; Composite Filaments\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eFlashforge Adventurer 5M Pro\u003c\/strong\u003e is a fully enclosed, high-speed FDM 3D printer that prints at \u003cstrong\u003e300 mm\/s\u003c\/strong\u003e with a travel speed of \u003cstrong\u003e600 mm\/s\u003c\/strong\u003e — without sacrificing surface quality. Built-in vibration compensation, a direct-drive extruder rated to \u003cstrong\u003e280°C\u003c\/strong\u003e, and automatic bed leveling make it one of the most capable enclosed desktop printers available for anyone who needs speed, engineering material support, and a workflow that just works out of the box.\u003c\/p\u003e\n\u003cp\u003eWhether you are printing functional prototypes in PA-CF, enclosures in ABS, outdoor fixtures in ASA, or detailed parts in PLA, the Adventurer 5M Pro handles the full range without requiring a different machine for each material family.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e⚠️ Important — Read Before Printing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilation still recommended:\u003c\/strong\u003e The printer includes HEPA and activated carbon filtration, which captures particles and reduces odors significantly. However, for ABS, ASA, PC, and nylon-based filaments, additional room ventilation is still advisable for extended print sessions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineering filaments need higher temps:\u003c\/strong\u003e PA-CF, PA-GF, and PC push the extruder toward its 280°C limit. Ensure you are using a hardened or appropriate nozzle when printing carbon fiber and glass fiber composites — they will wear a standard brass nozzle quickly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed temperature matters by material:\u003c\/strong\u003e The heated bed reaches up to 110°C. ABS, ASA, and PC require higher bed temps (90–110°C) for proper adhesion. PLA prints fine at 50–60°C. Match your bed temperature to your material — adhesion failures are almost always a temperature issue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle diameter affects results:\u003c\/strong\u003e The printer ships with a 0.4 mm nozzle. Optional 0.6 mm and 0.8 mm nozzles are available. Larger nozzles print faster but with less fine detail — match nozzle size to your part requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament storage:\u003c\/strong\u003e Nylon (PA), PA-CF, and PA-GF are highly hygroscopic — they absorb moisture from the air within hours and print poorly if wet. Store in sealed containers with desiccant and dry before printing if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e300 mm\/s — What That Speed Actually Means for You\u003c\/h3\u003e\n\u003cp\u003eMost FDM printers on the market print at 50–80 mm\/s. A printer doing \u003cstrong\u003e300 mm\/s\u003c\/strong\u003e is roughly 4–6× faster — which means a part that used to take 6 hours now takes around 90 minutes.\u003c\/p\u003e\n\u003cp\u003eBut raw speed is only useful if the print still looks good. The Adventurer 5M Pro achieves this through two systems working together:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration compensation:\u003c\/strong\u003e At high speeds, the print head generates vibrations that travel through the frame and show up as wavy \"ringing\" artifacts on your part's surface — especially around sharp corners and edges. The 5M Pro's vibration compensation system measures and cancels these resonance patterns in real time, keeping surfaces smooth even at full speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20,000 mm\/s² acceleration:\u003c\/strong\u003e Getting from 0 to 300 mm\/s quickly and smoothly is just as important as the top speed itself. This acceleration figure means the printer transitions between moves efficiently, which is what keeps print times genuinely fast rather than just fast on paper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFully Enclosed — The Right Way to Print Engineering Materials\u003c\/h3\u003e\n\u003cp\u003eEnclosure is not just about keeping dust off your print. It is about \u003cstrong\u003ethermal stability\u003c\/strong\u003e. Materials like ABS, ASA, PA, and PC need a consistently warm build environment to prevent warping and layer delamination. An open printer exposes the print to room air currents that cool the part unevenly — the Adventurer 5M Pro's fully enclosed chamber traps heat around the print throughout the entire job.\u003c\/p\u003e\n\u003cp\u003eThe enclosure also works in the other direction: \u003cstrong\u003eHEPA filtration\u003c\/strong\u003e captures fine particulate matter (UFPs) released during printing, and the \u003cstrong\u003eactivated carbon filter\u003c\/strong\u003e absorbs the VOC compounds responsible for the chemical odor of ABS and other technical filaments. This makes the 5M Pro a practical choice for office environments, shared workspaces, and classrooms where air quality matters.\u003c\/p\u003e\n\u003ch3\u003eDirect-Drive Extruder — From Cold to Printing in 35 Seconds\u003c\/h3\u003e\n\u003cp\u003eThe 5M Pro uses a \u003cstrong\u003edirect-drive extruder\u003c\/strong\u003e, meaning the motor that pushes filament sits directly above the nozzle rather than at the back of the machine (Bowden setup). The practical difference: better control over flexible and composite materials, less retraction tuning required, and more consistent extrusion at high speeds.\u003c\/p\u003e\n\u003cp\u003eThe nozzle heats from cold to \u003cstrong\u003e200°C in 35 seconds\u003c\/strong\u003e — no waiting around for warm-up before a job. And at \u003cstrong\u003e280°C maximum temperature\u003c\/strong\u003e, the extruder handles every filament in the compatibility list, from basic PLA all the way up to carbon fiber-reinforced nylon.\u003c\/p\u003e\n\u003ch3\u003eQuick-Release Nozzle — Swap in Seconds, Not Minutes\u003c\/h3\u003e\n\u003cp\u003eChanging nozzles on most printers involves waiting for the hotend to heat, using pliers, risking burns, and spending 10–15 minutes on a maintenance task that should take two. The Adventurer 5M Pro's \u003cstrong\u003equick-release nozzle system\u003c\/strong\u003e eliminates all of that. Swap between your 0.4 mm, 0.6 mm, and 0.8 mm nozzles in seconds — no tools needed — then get back to printing.\u003c\/p\u003e\n\u003cp\u003eIt also makes nozzle cleaning faster and more consistent, which is especially valuable when switching between standard and composite filaments.\u003c\/p\u003e\n\u003ch3\u003eADM Auto-Leveling — Perfect First Layers, Every Print\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eAutomatic Datum Management (ADM)\u003c\/strong\u003e system measures the build plate surface before each print and compensates for any deviation in real time. The nozzle-to-bed distance stays exactly where it needs to be across the entire plate — eliminating the single most common cause of failed first layers: an uneven or slightly tilted bed.\u003c\/p\u003e\n\u003cp\u003eNo manual tramming. No re-leveling after moving the printer. No failed prints because the front-left corner was 0.1 mm lower than the rest.\u003c\/p\u003e\n\u003ch3\u003eBuilt-In Camera \u0026amp; Remote Monitoring\u003c\/h3\u003e\n\u003cp\u003eThe integrated camera lets you monitor your print remotely via Wi-Fi — check progress, catch failures early, and avoid coming back to a pile of spaghetti that wasted 4 hours of print time. Pair this with \u003cstrong\u003efilament runout detection\u003c\/strong\u003e and \u003cstrong\u003epower loss recovery\u003c\/strong\u003e and you have a machine that can run long, unattended jobs with genuine confidence.\u003c\/p\u003e\n\u003ch3\u003eCompatible Filaments\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003cth\u003eTypical Use\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePLA \/ PLA-CF\u003c\/td\u003e\n\u003ctd\u003ePrototypes, display models, general use\u003c\/td\u003e\n\u003ctd\u003eEasiest to print; PLA-CF adds stiffness and matte finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePETG \/ PETG-CF \/ PETG-GF\u003c\/td\u003e\n\u003ctd\u003eFunctional parts, enclosures, moderate heat\u003c\/td\u003e\n\u003ctd\u003eBetter durability than PLA; composites add rigidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003ctd\u003eAutomotive, enclosures, post-processing (sanding, acetone smoothing)\u003c\/td\u003e\n\u003ctd\u003eRequires enclosure — the 5M Pro is well suited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eASA\u003c\/td\u003e\n\u003ctd\u003eOutdoor parts, UV-resistant applications\u003c\/td\u003e\n\u003ctd\u003eABS-level printability with superior UV and weather resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePA (Nylon) \/ PA-CF \/ PA-GF\u003c\/td\u003e\n\u003ctd\u003eMechanical parts, gears, structural components\u003c\/td\u003e\n\u003ctd\u003eDry filament before use; composite variants add stiffness and reduce creep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePC (Polycarbonate)\u003c\/td\u003e\n\u003ctd\u003eHigh-heat, impact-resistant parts\u003c\/td\u003e\n\u003ctd\u003eRequires max extruder temp; benefit from enclosure heat retention\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHIPS\u003c\/td\u003e\n\u003ctd\u003eSupport material for ABS, display models\u003c\/td\u003e\n\u003ctd\u003eDissolvable in limonene when used as support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint Technology\u003c\/td\u003e\n\u003ctd\u003eFDM (Fused Deposition Modeling)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Volume\u003c\/td\u003e\n\u003ctd\u003e220 × 220 × 220 mm (8.7\" × 8.7\" × 8.7\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint Speed\u003c\/td\u003e\n\u003ctd\u003e300 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTravel Speed\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAcceleration\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinting Precision\u003c\/td\u003e\n\u003ctd\u003e±0.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition Precision\u003c\/td\u003e\n\u003ctd\u003e0.025 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Thickness\u003c\/td\u003e\n\u003ctd\u003e0.1 – 0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder Type\u003c\/td\u003e\n\u003ctd\u003eDirect Drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Extruder Temperature\u003c\/td\u003e\n\u003ctd\u003e280°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Warmup Time\u003c\/td\u003e\n\u003ctd\u003e200°C in 35 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Diameter\u003c\/td\u003e\n\u003ctd\u003e0.4 mm standard (0.6 mm and 0.8 mm optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeated Bed\u003c\/td\u003e\n\u003ctd\u003eUp to 110°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eFully enclosed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir Filtration\u003c\/td\u003e\n\u003ctd\u003eHEPA + activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeveling\u003c\/td\u003e\n\u003ctd\u003eAutomatic (ADM system)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVibration Compensation\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamera\u003c\/td\u003e\n\u003ctd\u003eBuilt-in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Runout Detection\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Loss Recovery\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTouch Screen\u003c\/td\u003e\n\u003ctd\u003e4.3\" HD color\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eUSB, Wi-Fi, Ethernet, Cloud printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Software\u003c\/td\u003e\n\u003ctd\u003eFlashPrint, Cura, Polar Cloud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFile Input Formats\u003c\/td\u003e\n\u003ctd\u003eSTL \/ 3MF \/ OBJ \/ FPP \/ BMP \/ PNG \/ JPEG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eAC 100–240V \/ DC 24V \/ 13.3A \/ 320W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine Dimensions\u003c\/td\u003e\n\u003ctd\u003e380 × 400 × 453 mm (15\" × 15.7\" × 17.8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e44.3 lbs (20.1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePrint Settings Reference\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003cth\u003eExtruder Temp\u003c\/th\u003e\n\u003cth\u003eBed Temp\u003c\/th\u003e\n\u003cth\u003eSpeed\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePLA\u003c\/td\u003e\n\u003ctd\u003e190–220°C\u003c\/td\u003e\n\u003ctd\u003e50–60°C\u003c\/td\u003e\n\u003ctd\u003eUp to 300 mm\/s\u003c\/td\u003e\n\u003ctd\u003eCooling fan on; no enclosure required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePLA-CF\u003c\/td\u003e\n\u003ctd\u003e200–230°C\u003c\/td\u003e\n\u003ctd\u003e50–65°C\u003c\/td\u003e\n\u003ctd\u003eUp to 250 mm\/s\u003c\/td\u003e\n\u003ctd\u003eUse hardened nozzle; abrasive material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePETG\u003c\/td\u003e\n\u003ctd\u003e230–250°C\u003c\/td\u003e\n\u003ctd\u003e70–85°C\u003c\/td\u003e\n\u003ctd\u003e150–250 mm\/s\u003c\/td\u003e\n\u003ctd\u003eReduce cooling fan speed to avoid layer splitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePETG-CF \/ PETG-GF\u003c\/td\u003e\n\u003ctd\u003e240–255°C\u003c\/td\u003e\n\u003ctd\u003e80–90°C\u003c\/td\u003e\n\u003ctd\u003e150–220 mm\/s\u003c\/td\u003e\n\u003ctd\u003eHardened nozzle required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003ctd\u003e230–250°C\u003c\/td\u003e\n\u003ctd\u003e95–110°C\u003c\/td\u003e\n\u003ctd\u003e100–200 mm\/s\u003c\/td\u003e\n\u003ctd\u003eKeep enclosure closed throughout; minimize drafts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eASA\u003c\/td\u003e\n\u003ctd\u003e240–260°C\u003c\/td\u003e\n\u003ctd\u003e90–110°C\u003c\/td\u003e\n\u003ctd\u003e100–200 mm\/s\u003c\/td\u003e\n\u003ctd\u003eSimilar to ABS; excellent UV stability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePA \/ PA-CF \/ PA-GF\u003c\/td\u003e\n\u003ctd\u003e250–280°C\u003c\/td\u003e\n\u003ctd\u003e70–90°C\u003c\/td\u003e\n\u003ctd\u003e80–150 mm\/s\u003c\/td\u003e\n\u003ctd\u003eDry filament before use — moisture causes stringing and bubbles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePC\u003c\/td\u003e\n\u003ctd\u003e260–280°C\u003c\/td\u003e\n\u003ctd\u003e100–110°C\u003c\/td\u003e\n\u003ctd\u003e60–120 mm\/s\u003c\/td\u003e\n\u003ctd\u003eEnclosed chamber essential; adhesion can be challenging — use glue stick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHIPS\u003c\/td\u003e\n\u003ctd\u003e220–240°C\u003c\/td\u003e\n\u003ctd\u003e90–110°C\u003c\/td\u003e\n\u003ctd\u003e100–200 mm\/s\u003c\/td\u003e\n\u003ctd\u003eUse as support for ABS; soluble in limonene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdventurer 5M Pro 3D Printer\u003c\/li\u003e\n\u003cli\u003e250g PLA Filament (sample roll)\u003c\/li\u003e\n\u003cli\u003e0.6 mm Nozzle Kit\u003c\/li\u003e\n\u003cli\u003ePower Cord\u003c\/li\u003e\n\u003cli\u003eUSB Drive\u003c\/li\u003e\n\u003cli\u003eLeveling Tool\u003c\/li\u003e\n\u003cli\u003eFilament Holder\u003c\/li\u003e\n\u003cli\u003eScrewdriver, Hex Wrench Set, Pliers\u003c\/li\u003e\n\u003cli\u003eGrease\u003c\/li\u003e\n\u003cli\u003eGlue (for bed adhesion)\u003c\/li\u003e\n\u003cli\u003eQuick Start Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFlashforge Adventurer 5M Pro\u003c\/strong\u003e is the right machine when you need more than a basic printer but do not want the complexity of an open-frame industrial system:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineers and product designers\u003c\/strong\u003e prototyping in functional materials — PA-CF, PETG-GF, PC, and ASA — who need a machine that handles engineering filaments reliably without a separate high-temp enclosure setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakers and hobbyists stepping up from entry-level printers\u003c\/strong\u003e — ADM auto-leveling, vibration compensation, and FlashPrint software remove the technical friction so you can focus on what you are building, not on tuning the machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall workshops and shared makerspaces\u003c\/strong\u003e where the HEPA + carbon filtration makes operating an FDM printer in a shared space practical and safe for everyone in the room\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducators and classroom environments\u003c\/strong\u003e that need speed (more prints per day), safety (enclosed + filtered), and reliability (filament runout + power loss recovery means a failed session does not ruin a lesson)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnyone printing ABS or ASA regularly\u003c\/strong\u003e on an open-frame machine and dealing with constant warping — the enclosed chamber solves this problem completely\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse our full selection of \u003ca href=\"\/collections\/fdm-3d-printers\"\u003eFDM 3D printers\u003c\/a\u003e or explore our \u003ca href=\"\/collections\/high-speed-3d-printers\"\u003ehigh-speed 3D printers\u003c\/a\u003e to compare options for your workflow.\u003c\/p\u003e","brand":"Machine Horizon","offers":[{"title":"AD5M Pro","offer_id":52771626615078,"sku":"DLZ-AD5P-1","price":379.0,"currency_code":"USD","in_stock":true},{"title":"AD5M Pro+4 PLA (Everyday Color)","offer_id":52771626647846,"sku":"DLZ-AD5P-5","price":459.0,"currency_code":"USD","in_stock":true},{"title":"AD5M Pro+12 PLA (Everyday Color)","offer_id":52771626680614,"sku":"AD5M Pro+12 PLA","price":567.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/5M_P_1x_0c2d6d57-dc7d-4f72-b3f0-3be6022206ff.png?v=1773845518"}],"url":"https:\/\/supplies3d.shop\/collections\/high-speed-3d-printers.oembed","provider":"SUPPLIES3D","version":"1.0","type":"link"}