{"title":"Elegoo","description":"","products":[{"product_id":"resin-for-sla-3d-printing-all-types-elegoo","title":"Resin for SLA 3D Printing All-Types (ELEGOO)","description":"\u003ch2\u003eElegoo SLA\/MSLA Resin — 1kg, 405nm UV-Curing Photopolymer for LCD\/MSLA\/DLP Printers, 5 Formulas: Standard 2.0, Water-Washable, ABS-Like 3.0, 8K Standard, Plant-Based\u003c\/h2\u003e\n\n\u003cp\u003e\n  Elegoo's resin lineup covers every functional use case in SLA and\n  MSLA printing — from fast general-purpose prototyping to ultra-high\n  detail 8K miniatures, from solvent-free washable workflows to\n  impact-resistant functional parts. All formulas cure at\n  \u003cstrong\u003e405nm UV wavelength\u003c\/strong\u003e, ship in 1kg containers,\n  and are compatible with the full range of LCD\/MSLA\/DLP printers\n  including the Elegoo Mars series, Saturn series, Jupiter series,\n  and any third-party printer operating in the 385–410nm range.\n  Choose your formula based on your primary workflow requirement —\n  the table below maps each type to its specific use case.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  ⚠️ \u003cstrong\u003eAll resins — including \"safer\" and plant-based\n  formulas — are toxic by nature and require proper handling.\u003c\/strong\u003e\n  Always print in a well-ventilated area. Wear nitrile gloves\n  and eye protection when handling uncured resin. Keep away from\n  skin, eyes, and open flames. Dispose of waste resin and\n  IPA\/wash water according to local regulations — do not pour\n  down drains.\u003cbr\u003e\n  ⚠️ \u003cstrong\u003eShake the bottle vigorously for 2 minutes before\n  each use.\u003c\/strong\u003e Unsettled resin produces inconsistent cure\n  and poor bed adhesion regardless of formula.\u003cbr\u003e\n  ✅ \u003cstrong\u003eAll formulas: 405nm, 1kg, LCD\/MSLA\/DLP compatible.\u003c\/strong\u003e\n\u003c\/p\u003e\n\n\u003ch3\u003eWhich Elegoo Resin Is Right for You? — Selection Guide\u003c\/h3\u003e\n\n\u003ctable\u003e\n  \u003cthead style=\"background-color:#000000;color:#ffffff;\"\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eFormula\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003eBest for\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003eKey advantage\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003eNot ideal for\u003c\/strong\u003e\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eStandard 2.0\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eGeneral-purpose prototyping, figurines, everyday prints\u003c\/td\u003e\n      \u003ctd\u003eMost affordable entry point, broad color range, predictable behavior\u003c\/td\u003e\n      \u003ctd\u003eFunctional parts that need impact resistance or heat tolerance\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eWater-Washable\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eBeginners, indoor workflows, anyone avoiding IPA\u003c\/td\u003e\n      \u003ctd\u003eRinse with tap water — no IPA, no wash station, low odor\u003c\/td\u003e\n      \u003ctd\u003eLong-term durability; less mechanically robust than ABS-Like\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eABS-Like 3.0\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eFunctional parts, snap-fits, mechanical components, prototypes\u003c\/td\u003e\n      \u003ctd\u003eHigh impact resistance, low brittleness, ABS-level toughness\u003c\/td\u003e\n      \u003ctd\u003ePrints where fine detail at 8K resolution is the primary requirement\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003e8K Standard\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eMiniatures, jewelry, dental models, ultra-fine detail prints\u003c\/td\u003e\n      \u003ctd\u003eMaximizes 8K printer resolution — finest surface detail available\u003c\/td\u003e\n      \u003ctd\u003eFunctional parts requiring impact resistance (more brittle than ABS-Like)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003ePlant-Based\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eEco-conscious printing, reduced environmental impact\u003c\/td\u003e\n      \u003ctd\u003eRenewable plant-based feedstock, reduced petrochemical content\u003c\/td\u003e\n      \u003ctd\u003eApplications requiring maximum mechanical performance\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eStandard 2.0 Resin — The Reliable Everyday Formula\u003c\/h3\u003e\n\u003cp\u003e\n  Standard 2.0 is the baseline Elegoo formula — the right choice\n  when you need a predictable, affordable resin that prints cleanly\n  across a wide range of models without dialing in specialized\n  settings. It balances strength, flexibility, and surface detail\n  well enough for figurines, display models, prototypes, and\n  general workshop use. \u003cstrong\u003e405nm cure wavelength\u003c\/strong\u003e,\n  low shrinkage during photocuring for dimensional accuracy,\n  and fast cure times for production efficiency. Available in\n  the widest color range in the Elegoo lineup. If you're starting\n  out in resin printing or need a cost-effective general-purpose\n  formula, Standard 2.0 is the correct starting point.\n\u003c\/p\u003e\n\n\u003ch3\u003eWater-Washable Resin — IPA-Free Post-Processing\u003c\/h3\u003e\n\u003cp\u003e\n  Water-Washable resin is formulated with a modified chemistry\n  that allows uncured resin to rinse off printed parts under\n  plain tap water — eliminating the isopropyl alcohol wash\n  station, reducing solvent cost, and significantly lowering\n  the odor footprint of the post-processing workflow. This\n  makes it the correct choice for \u003cstrong\u003eapartment printing,\n  classroom environments, and any setup where IPA storage\n  and ventilation are limiting factors\u003c\/strong\u003e. Low viscosity\n  ensures excellent small-detail reproduction. The tradeoff\n  is slightly lower mechanical robustness compared to\n  ABS-Like 3.0 — Water-Washable is optimized for convenience\n  and display quality, not functional part strength.\u003cbr\u003e\n  ⚠️ Even water-washable resin is toxic in uncured form —\n  the water-safe washability applies only to the wash process,\n  not to handling without PPE.\n\u003c\/p\u003e\n\n\u003ch3\u003eABS-Like 3.0 Resin — Impact Resistance for Functional Parts\u003c\/h3\u003e\n\u003cp\u003e\n  ABS-Like 3.0 is formulated to replicate the mechanical\n  properties of ABS plastic — \u003cstrong\u003ehigh impact resistance,\n  good tensile strength, reduced brittleness, and higher\n  tenacity\u003c\/strong\u003e compared to standard resin. Where standard\n  resin parts snap under bending stress, ABS-Like 3.0 parts\n  flex and absorb energy before failing. Compatible with the\n  full 385–410nm printer range, with low viscosity for fast\n  cure cycles and good fluidity to prevent FEP adhesion\n  failures on layer separation. Correct formula for snap-fits,\n  functional enclosures, hinges, mechanical prototypes, board\n  game miniatures that see regular handling, and any part\n  where standard resin has cracked or broken in use.\n\u003c\/p\u003e\n\n\u003ch3\u003e8K Standard Resin — Maximum Resolution for Detail Prints\u003c\/h3\u003e\n\u003cp\u003e\n  8K Standard resin is formulated specifically to exploit the\n  resolution ceiling of 8K MSLA printers like the Elegoo\n  Saturn 2 8K. The resin's chemistry and cure profile are\n  calibrated to deliver \u003cstrong\u003ethe finest surface detail\n  and most accurate dimensional reproduction available\u003c\/strong\u003e\n  in the Elegoo lineup — visible at the level of individual\n  scale model rivets, jewelry texture, and sub-millimeter\n  miniature detail. Requires approximately 1 additional\n  second of exposure time compared to standard resins at\n  equivalent layer height. Best results on 8K printers —\n  on lower-resolution machines the performance advantage\n  over Standard 2.0 is reduced. More brittle than ABS-Like\n  3.0 — 8K Standard is optimized for detail fidelity,\n  not mechanical performance.\n\u003c\/p\u003e\n\n\u003ch3\u003ePlant-Based Resin — Reduced Environmental Footprint\u003c\/h3\u003e\n\u003cp\u003e\n  Plant-Based resin is manufactured from renewable plant-derived\n  feedstocks rather than entirely petroleum-based monomers,\n  reducing the environmental impact of the resin production\n  process. Print quality and durability are comparable to\n  Standard 2.0, making it a practical choice for\n  \u003cstrong\u003eeco-conscious makers and educators\u003c\/strong\u003e who\n  want good print performance alongside a reduced\n  petrochemical footprint.\u003cbr\u003e\n  ⚠️ Plant-based formulation does not mean non-toxic in\n  uncured form — full PPE and ventilation protocols apply\n  equally to plant-based resin as to all other formulas.\n\u003c\/p\u003e\n\n\u003ch3\u003ePrinter Compatibility\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCure wavelength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e405nm (all formulas) \/ 385–410nm compatible range\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrinter types\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLCD \/ MSLA \/ DLP\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eElegoo compatible series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMars series, Saturn series, Jupiter series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThird-party compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAny LCD\/MSLA\/DLP printer operating in the 385–410nm UV range\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eContainer size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1kg (all formulas)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCool, dark location away from UV light sources — reseal tightly after use\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eResin Printing Safety — Required Reading Before Your First Print\u003c\/h3\u003e\n\u003cp\u003e\n  Photopolymer resin is a hazardous material in its uncured liquid\n  state regardless of formula or branding. These requirements apply\n  to every Elegoo resin variant without exception:\n\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e🧤\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eGloves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNitrile gloves required for all handling — latex does not provide adequate protection against monomer penetration\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e🥽\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eEye protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSafety glasses or goggles required when opening, pouring, or handling resin containers\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e💨\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eVentilation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrint in a well-ventilated area or with active fume extraction — even low-odor formulas emit VOCs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e🚰\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWash water disposal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNever pour resin wash water down drains — cure under UV before disposal per local regulations\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e🔆\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKeep in original opaque container away from UV light, heat, and ignition sources\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e🧼\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSkin contact\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWash immediately with soap and water — repeated skin exposure can cause sensitization\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cp\u003e\n  The Elegoo resin lineup covers the full spectrum of MSLA\/LCD\n  printing use cases in a single product family with five variants.\n  New printers starting out should begin with\n  \u003cstrong\u003eStandard 2.0\u003c\/strong\u003e to establish baseline settings\n  before moving to specialized formulas. Indoor and apartment\n  printers should choose \u003cstrong\u003eWater-Washable\u003c\/strong\u003e for\n  the IPA-free workflow. Anyone printing functional parts,\n  snap-fits, or mechanical components should use\n  \u003cstrong\u003eABS-Like 3.0\u003c\/strong\u003e. Miniature painters, jewelers,\n  and detail-focused builders with 8K printers should use\n  \u003cstrong\u003e8K Standard\u003c\/strong\u003e. Makers prioritizing sustainability\n  alongside solid print quality should choose\n  \u003cstrong\u003ePlant-Based\u003c\/strong\u003e. Select your formula and color\n  from the variant selector above.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  Browse our full resin catalog by type:\n  \u003ca href=\"\/collections\/standard-resin\"\u003eStandard Resin\u003c\/a\u003e ·\n  \u003ca href=\"\/collections\/water-washable-resin\"\u003eWater-Washable Resin\u003c\/a\u003e ·\n  \u003ca href=\"\/collections\/abs-like-resin\"\u003eABS-Like Resin\u003c\/a\u003e ·\n  \u003ca href=\"\/collections\/plant-based-resin\"\u003ePlant-Based Resin\u003c\/a\u003e ·\n  or explore the full \u003ca href=\"\/collections\/resin-3d\"\u003e3D Resin catalog\u003c\/a\u003e.\n\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Standard 2.0 \/ Grey","offer_id":52735656821030,"sku":"ELE2366STAGRE","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Standard 2.0 \/ Medium Slate Blue","offer_id":52735656853798,"sku":"ELE2367STAMED","price":22.99,"currency_code":"USD","in_stock":false},{"title":"Standard 2.0 \/ White","offer_id":52735656886566,"sku":"ELE2368STAWHI","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Water-Washable \/ Grey","offer_id":52735656919334,"sku":"ELE2369WATGRE","price":29.99,"currency_code":"USD","in_stock":true},{"title":"ABS-Like 3.0 \/ Black","offer_id":52735656952102,"sku":"ELE2370ABSBLA","price":18.99,"currency_code":"USD","in_stock":false},{"title":"ABS-Like 3.0 \/ Grey","offer_id":52735656984870,"sku":"ELE2371ABSGRE","price":18.99,"currency_code":"USD","in_stock":true},{"title":"ABS-Like 3.0 \/ White","offer_id":52735657017638,"sku":"ELE2372ABSWHI","price":18.99,"currency_code":"USD","in_stock":true},{"title":"ABS-Like 3.0 \/ Translucent","offer_id":52735657050406,"sku":"ELE2373ABSCLE","price":18.99,"currency_code":"USD","in_stock":false},{"title":"8K Standard \/ Grey","offer_id":52735657083174,"sku":"ELE23748K GRE","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Plant-Based \/ Grey","offer_id":52735657115942,"sku":"ELE2375PLAGRE","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Standard 2.0 \/ Black","offer_id":52848512598310,"sku":"ELE2368STABLA","price":22.99,"currency_code":"USD","in_stock":true},{"title":"ABS-Like 3.0 \/ Beige","offer_id":52848520692006,"sku":"ELE2370ABSBLA","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/resin-for-sla-3d-printing-all-types-elegoo-west3d-3d-printing-supplies-elegoo-481177.jpg?v=1773259426"},{"product_id":"flexible-soft-splint-resin-for-dlp-and-lcd-printers-500ml-500gram","title":"Flexible Soft Splint Resin for DLP and LCD Printers 500ml\/500gram","description":"\u003c!-- ============================================================\n     supplies3d.shop — Product Description\n     Product : Flexible Soft Splint Resin for DLP and LCD Printers 500ml \/ 500g\n     Silo    : Resinas\n     Tags    : #dental-resin\n     Last updated: March 2026\n     ⚠️ Ver sección NOTAS DE IMPLEMENTACIÓN al final del archivo.\n     ============================================================ --\u003e\n\u003ch2\u003e3D Print Comfortable Night Guards, TMJ Splints \u0026amp; Oral Appliances\u003c\/h2\u003e\n\u003cp\u003eNot every patient can tolerate a hard acrylic night guard. For patients with mild bruxism, TMJ sensitivity, or those who are new to wearing oral appliances and need time to adjust, a soft flexible splint is often the better clinical choice — it feels more like a cushion than a mouthguard, seats without discomfort, and promotes patient compliance because patients actually keep wearing it.\u003c\/p\u003e\n\u003cp\u003eThis flexible soft splint resin lets you print those appliances directly from your DLP or LCD printer. No outsourcing, no waiting. Design the splint from a digital scan, print it, deliver it — with a custom fit that a boil-and-bite appliance from a pharmacy can never match.\u003c\/p\u003e\n\u003c!-- ============================================================\n     WARNINGS — INTRAORAL PRODUCT\n     ============================================================ --\u003e\n\u003ch3\u003e⚠️ Critical Information Before Clinical Use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e⚠️ This appliance is worn inside the patient's mouth for extended periods.\u003c\/strong\u003e Before delivering any 3D-printed soft splint to a patient, confirm that this material's biocompatibility has been validated per ISO 10993 or equivalent standards applicable in your jurisdiction. Request the current Safety Data Sheet (SDS) and biocompatibility documentation from your supplier. Dental professionals bear full clinical and regulatory responsibility for all patient-contact materials. \u003c!-- IMPLEMENTACIÓN: Confirmar con el proveedor la clasificación regulatoria\n         exacta de este producto (CE Class I\/IIa, FDA clearance, ISO 10993).\n         Publicar esa información prominentemente en esta sección una vez verificada.\n         Revisar imagen de parámetros del listing de Dental Mates para print settings\n         y cualquier información de certificación adicional. --\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e⚠️ Clinical note — soft splints are not for all bruxism cases.\u003c\/strong\u003e Research indicates that for patients with severe bruxism (heavy grinding), soft flexible splints may actually increase jaw muscle activity compared to hard acrylic splints — some patients clench harder against a soft surface. For severe bruxers, a hard splint is typically the preferred clinical choice. Consult clinical guidelines and assess each patient individually before selecting soft vs. hard material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing is mandatory for biocompatibility.\u003c\/strong\u003e Uncured or under-cured resin retains unpolymerized monomers that are irritating to oral tissue. Full UV post-curing per the manufacturer's protocol is required before every patient delivery. An appliance that is not fully post-cured is not safe for intraoral use — regardless of the resin's biocompatibility rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e⚠️ Do not over-cure flexible resins.\u003c\/strong\u003e Unlike rigid splint resins, flexible resins lose their softness and elasticity when exposed to excessive UV. Over-curing makes the appliance stiff — defeating its primary clinical purpose and potentially causing patient discomfort. Follow the manufacturer's post-cure time precisely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV wavelength:\u003c\/strong\u003e Compatible with DLP and monochrome LCD printers in the 385–405 nm range. Confirm your printer's light source before purchasing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessing temperature:\u003c\/strong\u003e Print at 20–30°C (68–86°F). Cold resin increases viscosity, causing adhesion failures and inconsistent layer properties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePPE required during fabrication:\u003c\/strong\u003e Wear nitrile gloves and safety glasses when handling uncured resin. Work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake before every use:\u003c\/strong\u003e Mix thoroughly before pouring into the vat to ensure consistent pigment distribution and curing behavior.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     HARD VS SOFT SPLINT — EXPLAINED SIMPLY\n     ============================================================ --\u003e\n\u003ch3\u003eHard Splint vs. Soft Splint — Which One Does Your Patient Need?\u003c\/h3\u003e\n\u003cp\u003eThink of it like two types of shoe insoles: one is rigid orthopedic support, the other is memory foam cushioning. Both protect your foot, but in different ways and for different situations. Dental splints work the same way.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eHard Splint Resin\u003c\/th\u003e\n\u003cth\u003eThis Soft Splint Resin\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeel in the mouth\u003c\/td\u003e\n\u003ctd\u003eRigid — like a hard plastic shell\u003c\/td\u003e\n\u003ctd\u003eFlexible — cushioned, adapts under pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eSevere bruxism, heavy grinders, TMD stabilization\u003c\/td\u003e\n\u003ctd\u003eMild bruxism, TMJ sensitivity, new wearers, sensitive patients\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePatient comfort\u003c\/td\u003e\n\u003ctd\u003eAdjustment period required — feels foreign at first\u003c\/td\u003e\n\u003ctd\u003eFaster adjustment — softer feel improves initial compliance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMuscle activity\u003c\/td\u003e\n\u003ctd\u003eReduces jaw muscle activity in most patients\u003c\/td\u003e\n\u003ctd\u003e⚠️ May increase muscle activity in severe bruxers — assess case-by-case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDurability\u003c\/td\u003e\n\u003ctd\u003eLonger lifespan under heavy grinding forces\u003c\/td\u003e\n\u003ctd\u003eShorter lifespan in severe grinding cases — consider for moderate use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCushioning\u003c\/td\u003e\n\u003ctd\u003eNone — occlusal forces distribute mechanically\u003c\/td\u003e\n\u003ctd\u003eYes — absorbs and distributes impact forces like a buffer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolishable surface\u003c\/td\u003e\n\u003ctd\u003eYes — high gloss finish achievable\u003c\/td\u003e\n\u003ctd\u003eYes — soft resins can be polished to a smooth, comfortable finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFor a hard splint option, see our \u003ca href=\"\/collections\/dental-resin\"\u003eDental Resin\u003c\/a\u003e collection.\u003c\/p\u003e\n\u003c!-- ============================================================\n     KEY MATERIAL PROPERTIES\n     ============================================================ --\u003e\n\u003ch3\u003eKey Material Properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControlled flexibility — the foundation of patient comfort:\u003c\/strong\u003e The cured resin has enough flex to absorb occlusal impact forces and conform slightly under bite pressure — providing the cushioning sensation that makes soft splints tolerable for patients who resist wearing rigid appliances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensional accuracy for precise fit:\u003c\/strong\u003e Despite being flexible, this resin prints with the tight tolerances required for a well-fitting oral appliance. A custom-printed soft splint fits the patient's arch precisely — no boil-and-bite approximations, no bulky over-thickness to compensate for inaccuracy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBiocompatible formulation:\u003c\/strong\u003e Designed for extended intraoral contact — the kind of exposure a nightly splint sees across months of use. Full post-curing per protocol is required to activate these properties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCushioning and impact absorption:\u003c\/strong\u003e The flexible matrix distributes bite forces across the occlusal surface rather than transmitting them rigidly — reducing pressure on the TMJ and reducing fatigue in the masseter and temporalis muscles during sleep.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolishable surface:\u003c\/strong\u003e The cured appliance accepts dental polishing to a smooth, comfortable finish — reducing soft tissue irritation from the lingual and buccal flanges during wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatient compliance advantage:\u003c\/strong\u003e Patients who have abandoned hard night guards due to discomfort are significantly more likely to wear a soft appliance consistently — which makes it clinically effective rather than sitting in a drawer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     CLINICAL APPLICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eClinical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSoft occlusal night guards for mild bruxism and clenching\u003c\/li\u003e\n\u003cli\u003eTMJ disorder cushioning splints and deprogrammers\u003c\/li\u003e\n\u003cli\u003eSoft repositioning appliances for initial TMJ therapy\u003c\/li\u003e\n\u003cli\u003eSnoring and sleep apnea retention appliances (as base material)\u003c\/li\u003e\n\u003cli\u003eBleaching trays and whitening appliances\u003c\/li\u003e\n\u003cli\u003eOrthodontic retainers requiring flexible fit\u003c\/li\u003e\n\u003cli\u003eSports mouthguards for patients requiring custom-fit protection\u003c\/li\u003e\n\u003cli\u003ePediatric occlusal appliances where rigid materials are poorly tolerated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     TECHNICAL SPECIFICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Technologies\u003c\/td\u003e\n\u003ctd\u003eDLP, Monochrome LCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength Range\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight \/ Volume\u003c\/td\u003e\n\u003ctd\u003e500 g \/ 500 ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResin Type\u003c\/td\u003e\n\u003ctd\u003eFlexible — soft occlusal appliance material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntraoral Use\u003c\/td\u003e\n\u003ctd\u003eYes — verify biocompatibility documentation before patient delivery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessing Temperature\u003c\/td\u003e\n\u003ctd\u003e20–30°C (68–86°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWash Method\u003c\/td\u003e\n\u003ctd\u003eIPA 95% or ethanol — gentle wash cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-Cure Required\u003c\/td\u003e\n\u003ctd\u003eYes — mandatory; do not over-cure (reduces flexibility)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003eBelow 25°C (77°F), away from light and heat sources\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     PRINT SETTINGS\n     ============================================================ --\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cp\u003eFlexible splint resins require careful exposure calibration. The most common error is over-exposure — which produces an appliance that is too rigid and defeats the purpose of using a soft material. Always print a test piece first, verify flexibility by hand before printing the patient appliance, and follow the manufacturer's validated post-cure time precisely.\u003c\/p\u003e\n\u003c!-- IMPLEMENTACIÓN: Verificar imagen de parámetros del producto en el listing de\n     Dental Mates. Si contiene valores de print settings del fabricante,\n     reemplazar los valores orientativos de esta tabla con los confirmados. --\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting\u003c\/th\u003e\n\u003cth\u003eRecommended Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Height\u003c\/td\u003e\n\u003ctd\u003e0.05 mm – 0.10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNormal Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e2–5 s — start low; over-exposure reduces flexibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e20–40 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Bottom Layers\u003c\/td\u003e\n\u003ctd\u003e3–5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Speed\u003c\/td\u003e\n\u003ctd\u003eSlow — flexible resins are more prone to delamination at high lift speeds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSplint Orientation\u003c\/td\u003e\n\u003ctd\u003eAngled 30–45° — reduces peel forces on thin flange sections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport Strategy\u003c\/td\u003e\n\u003ctd\u003eLight supports on lingual\/palatal surface only — keep occlusal surface support-free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Aliasing\u003c\/td\u003e\n\u003ctd\u003eEnabled — improves surface smoothness on curved arch contours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     POST-PROCESSING\n     ============================================================ --\u003e\n\u003ch3\u003ePost-Processing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove from build plate\u003c\/strong\u003e carefully. Support the appliance during removal — flexible resins can deform under uneven spatula pressure before post-cure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove supports immediately\u003c\/strong\u003e while the part is still in the pre-cured state — supports break off more cleanly before final UV hardening. Work carefully around the flanges and occlusal surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash in IPA 95% or ethanol\u003c\/strong\u003e — gentle immersion of 3–5 minutes. Do not use extended or aggressive ultrasonic cycles on flexible resins, as prolonged solvent contact can affect surface properties. Use fresh solvent for the final rinse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir dry completely\u003c\/strong\u003e before post-curing. Residual IPA on the surface during UV exposure affects the final surface finish and may create tackiness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-cure under UV — follow time precisely.\u003c\/strong\u003e ⚠️ Under-curing leaves cytotoxic monomers on the surface. Over-curing makes the appliance rigid. Use the manufacturer's validated post-cure time and check flexibility by hand before delivering to the patient — the appliance should flex noticeably under moderate finger pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolish with soft polishing wheels\u003c\/strong\u003e using standard dental polishing protocols. Flexible materials respond differently than rigid acrylic — use lower RPM and avoid heat buildup, which can temporarily distort the appliance shape.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify fit on articulated model\u003c\/strong\u003e and check for comfort before patient delivery. The appliance should seat fully with light pressure and release cleanly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!-- ============================================================\n     WHO IS THIS FOR\n     ============================================================ --\u003e\n\u003ch3\u003eWho Is This Resin For?\u003c\/h3\u003e\n\u003cp\u003eThis flexible soft splint resin is the right choice if:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou are a \u003cstrong\u003edentist or dental lab technician\u003c\/strong\u003e producing soft night guards, TMJ cushioning splints, or flexible oral appliances for patients who cannot comfortably tolerate hard rigid splints — or for mild bruxism cases where cushioning is the primary clinical goal.\u003c\/li\u003e\n\u003cli\u003eYour patients have \u003cstrong\u003eTMJ sensitivity, mild grinding habits, or low bruxism intensity\u003c\/strong\u003e — soft splints are clinically indicated for these profiles and produce better patient compliance than rigid alternatives.\u003c\/li\u003e\n\u003cli\u003eYou have patients who have \u003cstrong\u003epreviously abandoned hard night guards\u003c\/strong\u003e due to discomfort during the adjustment period — a soft appliance significantly lowers the adaptation threshold.\u003c\/li\u003e\n\u003cli\u003eYou own a \u003cstrong\u003e385–405 nm DLP or monochrome LCD printer\u003c\/strong\u003e and want to bring soft appliance production in-house — reducing turnaround time from lab outsourcing to same-day or next-day delivery.\u003c\/li\u003e\n\u003cli\u003eYou need a \u003cstrong\u003e500g \/ 500ml format\u003c\/strong\u003e — ideal for clinics with moderate appliance volume or for testing the resin before committing to larger quantities.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis resin is NOT the right choice if\u003c\/strong\u003e your patient has severe bruxism with heavy grinding forces — in those cases, a hard splint resin provides better protection, longer appliance life, and more effective reduction of jaw muscle activity. For hard splint applications, see our \u003ca href=\"\/collections\/dental-resin\"\u003eDental Resin\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"Dental Mates","offers":[{"title":"Default Title","offer_id":52836225548582,"sku":"sku-42676493615313","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/1-1SOFTSPLINT.png?v=1773934299"},{"product_id":"high-temperature-resistant-dental-model-resin-for-dlp-and-lcd-printers-1000ml1kg","title":"High-Temperature Resistant Dental Model Resin for DLP and LCD Printers 1000ml(1kg)","description":"\u003c!-- ============================================================\n     supplies3d.shop — Product Description\n     Product : High-Temperature Resistant Dental Model Resin for DLP and LCD Printers 1,000ml (1kg)\n     Silo    : Resinas\n     Tags    : #dental-model-resin · #dental-resin\n     Last updated: March 2026\n     ⚠️ Ver sección NOTAS DE IMPLEMENTACIÓN al final del archivo.\n     ============================================================ --\u003e\n\u003ch2\u003e3D Print Thermoforming Models for Clear Aligners \u0026amp; Orthodontic Appliances\u003c\/h2\u003e\n\u003cp\u003eIf you are making clear aligners or any thermoplastic orthodontic appliance in-house, you already know the problem with standard dental model resins: the heat press deforms the model. The thermoplastic sheet comes down at high temperature and pressure, and a standard resin model softens, warps, and transfers that distortion directly into the aligner — which then does not fit the patient correctly.\u003c\/p\u003e\n\u003cp\u003eThis high-temperature resistant dental model resin is specifically formulated to prevent that from happening. It is engineered to withstand the heat and pressure of the thermoforming process without losing its shape — so the aligner that comes off the model reflects your digital design, not a heat-distorted version of it. Everything else you expect from a dental model resin — dimensional accuracy, fine surface detail, low shrinkage — is built in. The high-temperature resistance is the additional layer that makes it the right choice for thermoforming workflows.\u003c\/p\u003e\n\u003c!-- ============================================================\n     WARNINGS\n     ============================================================ --\u003e\n\u003ch3\u003e⚠️ Before You Print — Read This First\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for intraoral use.\u003c\/strong\u003e This is a dental lab modeling resin — it is used to create the physical model over which thermoplastic appliances are formed. The resin model itself never contacts the patient's mouth. The aligner or retainer formed over it does.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV wavelength:\u003c\/strong\u003e Compatible with DLP and monochrome LCD printers in the 385–405 nm range. Confirm your printer's light source wavelength before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing is mandatory — and critical for heat resistance.\u003c\/strong\u003e The high-temperature properties of this resin are only fully activated after proper UV post-curing. An under-cured model will not achieve its rated heat resistance and will deform during thermoforming just like a standard resin. Always follow the manufacturer's post-cure protocol completely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow the model to cool fully before thermoforming.\u003c\/strong\u003e Post-curing generates heat in the model. Thermoforming over a warm model introduces dimensional variables. Let the model cool to room temperature — at least 30 minutes after curing — before placing it in the thermoforming press.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePPE required during fabrication:\u003c\/strong\u003e Wear nitrile gloves and safety glasses when handling uncured resin. Work in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake before every use:\u003c\/strong\u003e Mix thoroughly before pouring into the vat to ensure consistent pigment distribution and curing behavior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Keep sealed below 25°C (77°F), away from direct light and heat sources.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     WHY HEAT RESISTANCE MATTERS — EXPLAINED FOR A 12-YEAR-OLD\n     ============================================================ --\u003e\n\u003ch3\u003eWhy Does a Dental Model Need to Be Heat Resistant? (The Simple Version)\u003c\/h3\u003e\n\u003cp\u003eImagine you want to make a custom-fit tray for ice cubes using your hand as a mold. You press warm silicone over your hand, it sets in the exact shape of your fingers, and you have a perfect mold. That is essentially what a thermoforming machine does to make a clear aligner — except instead of warm silicone, it uses a hot thermoplastic sheet, and instead of your hand, it uses a 3D-printed model of the patient's teeth.\u003c\/p\u003e\n\u003cp\u003eHere is the problem: the machine heats that plastic sheet to around 70–120°C before pressing it over the model. If the model is made from a standard resin that softens at that temperature, it will deform slightly under the heat and pressure — and that deformation gets transferred into the aligner. The aligner then does not fit the patient correctly, and the entire orthodontic staging is compromised.\u003c\/p\u003e\n\u003cp\u003eThis high-temperature resistant resin stays rigid and dimensionally stable through the entire thermoforming cycle. The model does not soften. The aligner comes off with the exact geometry it was supposed to have. That is the entire value proposition of this product in one sentence.\u003c\/p\u003e\n\u003c!-- ============================================================\n     KEY FEATURES\n     ============================================================ --\u003e\n\u003ch3\u003eKey Material Properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh heat deflection temperature (HDT) — the defining property:\u003c\/strong\u003e This resin maintains its shape and dimensions through the thermoforming process. Where standard dental model resins begin to soften and deform under heat and pressure, this resin stays rigid — preserving the model geometry that your aligner staging depends on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh dimensional accuracy:\u003c\/strong\u003e Low shrinkage formulation that stays true to your digital model through printing and post-curing — so the tooth positions and angulations in the physical model match your treatment plan staging file.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh surface detail:\u003c\/strong\u003e Reproduces fine tooth morphology — cusps, marginal ridges, contact points, and gingival contours — with the resolution needed for accurate aligner seating and predictable tooth movement per stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy aligner release:\u003c\/strong\u003e The cured surface allows thermoformed thermoplastic sheets to release cleanly after forming — without tearing, sticking, or leaving residue on the aligner that would affect its optical clarity or fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReusable model durability:\u003c\/strong\u003e Heat-resistant models withstand multiple thermoforming cycles without degradation — useful when producing multiple aligner stages from the same model, or when reprinting a replacement appliance for a patient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1kg \/ 1,000ml format:\u003c\/strong\u003e Production volume format for orthodontic labs with high case throughput. The thermoforming workflow requires one model per stage per patient — volume matters more here than in any other dental model category.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     CLINICAL APPLICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eDental and Orthodontic Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClear aligner staging models (each stage of an aligner treatment plan)\u003c\/li\u003e\n\u003cli\u003eRetainer thermoforming models (Hawley-style and Essex\/Essix retainers)\u003c\/li\u003e\n\u003cli\u003eWhitening tray models\u003c\/li\u003e\n\u003cli\u003eNight guard thermoforming models\u003c\/li\u003e\n\u003cli\u003eOrthodontic appliance base models requiring vacuum-press or thermopress forming\u003c\/li\u003e\n\u003cli\u003eDiagnostic and study models used in heated environments\u003c\/li\u003e\n\u003cli\u003eCrown and bridge working models requiring superior dimensional stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     TECHNICAL SPECIFICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Technologies\u003c\/td\u003e\n\u003ctd\u003eDLP, Monochrome LCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength Range\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight \/ Volume\u003c\/td\u003e\n\u003ctd\u003e1,000 g \/ 1,000 ml (1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey Property\u003c\/td\u003e\n\u003ctd\u003eHigh-temperature resistant — stable under thermoforming heat and pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional Stability\u003c\/td\u003e\n\u003ctd\u003eHigh — low shrinkage through print and cure cycle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntraoral Use\u003c\/td\u003e\n\u003ctd\u003e❌ Not for intraoral use — lab modeling only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-Cure Required\u003c\/td\u003e\n\u003ctd\u003eYes — mandatory to activate full heat resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWash Method\u003c\/td\u003e\n\u003ctd\u003eIPA 95% or ethanol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessing Temperature\u003c\/td\u003e\n\u003ctd\u003e20–30°C (68–86°F) at print time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003eBelow 25°C (77°F), away from light and heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ⚠️ IMPLEMENTACIÓN: Verificar imagen de parámetros del producto en el listing\n     de Dental Mates. Si contiene el HDT específico del fabricante (°C), añadirlo\n     a la tabla arriba. Este es el dato más importante de este producto y debería\n     mostrarse prominentemente. HDT típicos en esta categoría: 120°C–190°C. --\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- ============================================================\n     PRINT SETTINGS\n     ============================================================ --\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cp\u003eHigh-temperature resins often require slightly longer exposure times than standard dental model resins to fully cure and activate their thermal resistance properties. Under-exposure is the most common cause of models that still deform during thermoforming. Always verify heat resistance by pressing a test model before committing to a full patient case series.\u003c\/p\u003e\n\u003c!-- IMPLEMENTACIÓN: Verificar imagen de parámetros del fabricante en el listing\n     de Dental Mates y reemplazar los valores orientativos de esta tabla con los\n     valores confirmados, especialmente el exposure time que es crítico para\n     activar la resistencia al calor. --\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting\u003c\/th\u003e\n\u003cth\u003eRecommended Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Height\u003c\/td\u003e\n\u003ctd\u003e0.05 mm – 0.10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNormal Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e2–6 s — high-temp resins may need slightly more than standard model resins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e25–45 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Bottom Layers\u003c\/td\u003e\n\u003ctd\u003e3–5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Speed\u003c\/td\u003e\n\u003ctd\u003eStandard to slow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Orientation\u003c\/td\u003e\n\u003ctd\u003eAngled 30–45° — reduces suction on flat model bases and improves surface quality on buccal surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport Strategy\u003c\/td\u003e\n\u003ctd\u003eLight supports on base — keep occlusal and buccal surfaces support-free for clean thermoforming contact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Aliasing\u003c\/td\u003e\n\u003ctd\u003eEnabled — improves surface smoothness for clean thermoplastic release\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     POST-PROCESSING\n     ============================================================ --\u003e\n\u003ch3\u003ePost-Processing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove from build plate\u003c\/strong\u003e carefully using a spatula.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash in IPA 95% or ethanol\u003c\/strong\u003e using an ultrasonic cleaner — two sequential cycles of 3–5 minutes each in fresh solvent. Rinse thoroughly. Residual uncured resin on the surface reduces heat resistance and creates a tacky surface that causes thermoplastic adhesion during forming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir dry completely\u003c\/strong\u003e using pressurized air. Ensure recesses between teeth are fully dry before post-curing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-cure under UV — full cure is mandatory for heat resistance.\u003c\/strong\u003e Use a rotating turntable curing station. Follow the manufacturer's validated time. This step activates the cross-linking that gives the resin its high-temperature stability. An under-cured model will fail in the thermoforming press.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow to cool fully to room temperature\u003c\/strong\u003e — minimum 30 minutes — before thermoforming. Post-curing generates internal heat in the model; thermoforming over a warm model introduces dimensional errors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify on a test press\u003c\/strong\u003e before running a patient case. Press a scrap sheet of your thermoplastic over the model at your standard settings — confirm that the model shows zero deformation and the sheet releases cleanly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!-- ============================================================\n     WHO IS THIS FOR\n     ============================================================ --\u003e\n\u003ch3\u003eWho Is This Resin For?\u003c\/h3\u003e\n\u003cp\u003eThis high-temperature resistant dental model resin is the right choice if:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou are an \u003cstrong\u003eorthodontist, orthodontic lab technician, or digital dentistry clinic\u003c\/strong\u003e producing clear aligner staging models in-house — where every model in the treatment sequence needs to survive the thermoforming press with zero dimensional change.\u003c\/li\u003e\n\u003cli\u003eYou have experienced \u003cstrong\u003emodel deformation during thermoforming\u003c\/strong\u003e with your current dental model resin — this is the direct solution to that problem. A resin with higher HDT eliminates the root cause of deformed aligners.\u003c\/li\u003e\n\u003cli\u003eYou produce \u003cstrong\u003ehigh case volumes\u003c\/strong\u003e of clear aligners or retainers and need a reliable, consistent 1kg production format that performs identically across batches — reducing reprints and remakes caused by material variability.\u003c\/li\u003e\n\u003cli\u003eYou own a \u003cstrong\u003e385–405 nm DLP or monochrome LCD printer\u003c\/strong\u003e and a UV curing station, and use a standard thermoforming press (vacuum or pressure) for PETG, TPU, or similar thermoplastic aligner materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis resin is NOT the right choice if\u003c\/strong\u003e you do not use thermoforming in your workflow and only need a standard dental model for crown and bridge fitting, implant models, or diagnostic use. For those applications, our \u003ca href=\"\/collections\/dental-model-resin\"\u003eDental Model Resin\u003c\/a\u003e collection offers the same accuracy at a more accessible price point.\u003c\/p\u003e","brand":"Dental Mates","offers":[{"title":"Default Title","offer_id":52836226007334,"sku":"sku-42676493648081","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/1HIGHTEMRRESISTENTRESIN.png?v=1773934334"},{"product_id":"reliable-temporary-crown-bridge-resin-for-dlp-and-lcd-printers-500ml-or-500grams","title":"Temporary Crown \u0026amp; Bridge Resin for DLP \u0026amp; LCD Printers 500ml or 500grams","description":"\u003c!-- ============================================================\n     supplies3d.shop — Product Description\n     Product : Reliable Temporary Crown \u0026 Bridge Resin for DLP and LCD Printers 500ml \/ 500g\n     Shades  : A1 · A2\n     Silo    : Resinas\n     Tags    : #dental-resin\n     Last updated: March 2026\n     ⚠️ Ver sección NOTAS DE IMPLEMENTACIÓN al final del archivo.\n     ============================================================ --\u003e\n\u003ch2\u003eBiocompatible Provisional Restorations in A1 \u0026amp; A2 Shades\u003c\/h2\u003e\n\u003cp\u003eWhen a patient leaves the chair after a crown preparation, they are not going home with a bare, shaved-down tooth. They are going home with a temporary crown that will live in their mouth for days, weeks, or sometimes months while the permanent restoration is being fabricated. That temporary needs to do two things: protect the prepared tooth and look like a natural tooth. If it fails mechanically — it cracks, fractures, or falls off — the patient is in pain and back in the chair unexpectedly. If it fails aesthetically — it looks obviously fake, the shade does not match — the patient is self-conscious every time they smile or speak.\u003c\/p\u003e\n\u003cp\u003eThis temporary crown and bridge resin is formulated to handle both requirements from a single bottle. It prints with the precision needed for accurate marginal fit — the most critical mechanical factor in provisional restorations — and cures to a shade that closely matches natural dentition in A1 and A2, the two most commonly prescribed tooth shades in the Vita Classical scale.\u003c\/p\u003e\n\u003c!-- ============================================================\n     WARNINGS — INTRAORAL PATIENT-CONTACT MATERIAL\n     ============================================================ --\u003e\n\u003ch3\u003e⚠️ Critical Clinical Information Before Patient Use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e⚠️ This material is placed inside the patient's mouth for weeks to months.\u003c\/strong\u003e Before delivering any 3D-printed temporary restoration to a patient, confirm that this material's biocompatibility meets the applicable regulatory requirements in your jurisdiction (ISO 10993, FDA clearance, CE Class IIa, or equivalent). Temporary restorations involve extended intraoral contact — regulatory compliance is non-negotiable. Request the current Safety Data Sheet (SDS) and biocompatibility certificate from your supplier. \u003c!-- IMPLEMENTACIÓN: Confirmar con el proveedor la clasificación regulatoria\n         exacta de este producto (CE Class IIa, FDA 510(k), ISO 10993).\n         Publicar esa información prominentemente aquí una vez verificada.\n         Verificar también si el producto indica duración máxima recomendada\n         de uso intraoral (semanas vs. meses). --\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor short-term provisional use only.\u003c\/strong\u003e This resin is indicated for temporary restorations during the interim phase of treatment — not for permanent definitive restorations. Verify the manufacturer's maximum recommended intraoral wear time before delivering to the patient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing is mandatory for biocompatibility and strength.\u003c\/strong\u003e The mechanical properties and biocompatibility of this resin are only fully activated after proper UV post-curing. An under-cured temporary will fracture prematurely under chewing forces and retains unpolymerized monomers that irritate gingival tissue. Follow the manufacturer's post-cure protocol without shortcuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse dedicated IPA for biocompatible resins.\u003c\/strong\u003e Never wash temporary or provisional resins using the same IPA bath used for non-biocompatible resins (model resins, splint resins). Cross-contamination with residues from other resins can compromise the biocompatibility of the final restoration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV wavelength:\u003c\/strong\u003e Compatible with DLP and monochrome LCD printers in the 385–405 nm range. Confirm your printer's light source before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePPE required during fabrication:\u003c\/strong\u003e Wear nitrile gloves and safety glasses when handling uncured resin. Work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShade selection:\u003c\/strong\u003e Available in A1 and A2. Select the shade that most closely matches the patient's adjacent natural teeth using a Vita shade guide before ordering. Confirm shade match on a printed test piece before cementing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     WHAT IS A TEMPORARY CROWN — EXPLAINED SIMPLY\n     ============================================================ --\u003e\n\u003ch3\u003eWhat Is a Temporary Crown and Why Does the Resin Matter?\u003c\/h3\u003e\n\u003cp\u003eWhen a dentist prepares a tooth for a crown, they need to grind it down to create space for the crown to sit over it. That prepared tooth — shorter, rougher, without enamel — cannot be left exposed. It is sensitive to temperature, vulnerable to bacteria, and structurally weaker than before. The temporary crown is the placeholder: it covers and protects the tooth from the day of preparation until the permanent crown arrives from the lab and gets cemented in.\u003c\/p\u003e\n\u003cp\u003eThink of it like a bandage over a wound — except this bandage needs to look like a real tooth, withstand chewing forces three times a day, and stay in place without loosening. For weeks. Sometimes for months.\u003c\/p\u003e\n\u003cp\u003eThat is why the resin matters. A temporary crown printed with the wrong material will crack during a meal, stain within a week, or fit so poorly that bacteria get under it and damage the prepared tooth further. This resin is formulated specifically for the mechanical and aesthetic demands of the provisional phase — strong enough to survive, natural enough to go unnoticed.\u003c\/p\u003e\n\u003c!-- ============================================================\n     KEY FEATURES\n     ============================================================ --\u003e\n\u003ch3\u003eKey Material Properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh flexural strength — resists fracture under chewing forces:\u003c\/strong\u003e The single most important mechanical property of a temporary crown. Every bite places bending stress on the restoration. A resin with high flexural strength resists that stress without cracking or fracturing during the provisional period.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent marginal fit — the key to a successful temporary:\u003c\/strong\u003e A poorly fitting margin allows bacteria and oral fluids under the crown, causing sensitivity, decay on the prepared tooth, and gingival inflammation. This resin prints with the dimensional accuracy needed for tight marginal adaptation — meaning the crown edge seals against the tooth as designed, not as approximated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA1 and A2 shade accuracy — matches the most common natural tooth colors:\u003c\/strong\u003e A1 and A2 are the two most frequently prescribed shades in the Vita Classical system — covering the majority of patients with light to medium natural tooth color. A well-matched temporary is invisible in conversation and allows the patient to maintain normal social confidence throughout the treatment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolishable to a natural gloss:\u003c\/strong\u003e After printing and post-processing, the surface can be polished to a smooth, glossy finish that mimics natural enamel. A matte or rough surface on a temporary accumulates plaque, stains quickly, and feels foreign to the tongue — all problems that drive patient complaints during the provisional period.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBiocompatible formulation for intraoral safety:\u003c\/strong\u003e Formulated for short-term contact with oral tissue — gingiva, periodontal ligament, pulp through dentinal tubules. Full post-curing per protocol is required to achieve these properties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy chairside adjustability:\u003c\/strong\u003e The cured material can be trimmed, adjusted, and polished chairside using standard dental burs and polishing systems — allowing the clinician to fine-tune occlusion and margins at delivery without special equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow shrinkage formulation:\u003c\/strong\u003e Minimal dimensional change between the digital design and the cured restoration — critical for marginal accuracy and predictable fit at delivery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     VITA SHADE SYSTEM — EXPLAINED SIMPLY\n     ============================================================ --\u003e\n\u003ch3\u003eWhat Are A1 and A2 Shades?\u003c\/h3\u003e\n\u003cp\u003eDentists use a standardized color system called the Vita Classical scale to describe tooth color. Think of it like a paint color chart, but for teeth. The \"A\" group represents reddish-brown tones — the most common family of natural tooth colors. The number indicates brightness: A1 is lighter, A2 is slightly darker and more saturated. Together, A1 and A2 cover the majority of patients with typical Western tooth coloration.\u003c\/p\u003e\n\u003cp\u003eChoosing the right shade before printing is important. A temporary in the wrong shade is immediately noticeable to the patient — especially in anterior (front) cases. Always verify the patient's shade with a physical Vita shade guide under natural light before selecting A1 or A2.\u003c\/p\u003e\n\u003c!-- ============================================================\n     CLINICAL APPLICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eClinical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-unit temporary crowns (anterior and posterior)\u003c\/li\u003e\n\u003cli\u003eMulti-unit temporary bridges (up to standard bridge span — verify with manufacturer)\u003c\/li\u003e\n\u003cli\u003eTemporary inlays and onlays\u003c\/li\u003e\n\u003cli\u003eProvisional veneers\u003c\/li\u003e\n\u003cli\u003eInterim restorations during implant osseointegration\u003c\/li\u003e\n\u003cli\u003eTrial smile temporaries for aesthetic case approval before final ceramic work\u003c\/li\u003e\n\u003cli\u003eLong-term provisionals during complex restorative planning phases\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     TECHNICAL SPECIFICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Technologies\u003c\/td\u003e\n\u003ctd\u003eDLP, Monochrome LCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength Range\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight \/ Volume\u003c\/td\u003e\n\u003ctd\u003e500 g \/ 500 ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable Shades\u003c\/td\u003e\n\u003ctd\u003eA1 (light) · A2 (medium) — Vita Classical scale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndication\u003c\/td\u003e\n\u003ctd\u003eTemporary \/ provisional restorations — short-term intraoral use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntraoral Use\u003c\/td\u003e\n\u003ctd\u003eYes — verify biocompatibility documentation before patient delivery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional Stability\u003c\/td\u003e\n\u003ctd\u003eHigh — low shrinkage for accurate marginal fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-Cure Required\u003c\/td\u003e\n\u003ctd\u003eYes — mandatory for strength and biocompatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWash Method\u003c\/td\u003e\n\u003ctd\u003eIPA 95% — dedicated bath for biocompatible resins only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessing Temperature\u003c\/td\u003e\n\u003ctd\u003e20–30°C (68–86°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003eBelow 25°C (77°F), away from light and heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     PRINT SETTINGS\n     ============================================================ --\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cp\u003eTemporary C\u0026amp;B resins require precise exposure calibration — over-exposure causes dimensional blooming that affects marginal fit, while under-exposure produces weak restorations that fracture during the first days of use. Always verify marginal fit on a die or model before cementing. Run a test crown first.\u003c\/p\u003e\n\u003c!-- IMPLEMENTACIÓN: Verificar imagen de parámetros del producto en el listing de\n     Dental Mates. Reemplazar los valores orientativos de esta tabla con los\n     valores confirmados del fabricante una vez disponibles. Los valores de exposure\n     time son especialmente críticos para este producto porque afectan directamente\n     la fit y la resistencia mecánica. --\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting\u003c\/th\u003e\n\u003cth\u003eRecommended Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Height\u003c\/td\u003e\n\u003ctd\u003e0.05 mm – 0.10 mm — finer layers improve marginal accuracy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNormal Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e3–5 s — start conservative; verify marginal fit before increasing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e20–40 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Bottom Layers\u003c\/td\u003e\n\u003ctd\u003e3–5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Speed\u003c\/td\u003e\n\u003ctd\u003eModerate — standard for rigid dental resins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrown Orientation\u003c\/td\u003e\n\u003ctd\u003eAngled 45° — minimizes support marks on the occlusal surface and margins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport Strategy\u003c\/td\u003e\n\u003ctd\u003eLight supports on non-marginal surfaces only — never place supports at the margin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Aliasing\u003c\/td\u003e\n\u003ctd\u003eEnabled — critical for sharp marginal geometry and smooth interproximal contours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     POST-PROCESSING \u0026 CLINICAL DELIVERY\n     ============================================================ --\u003e\n\u003ch3\u003ePost-Processing \u0026amp; Clinical Delivery Protocol\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove from build plate\u003c\/strong\u003e carefully using a spatula. Support the restoration from the occlusal surface during removal — thin margins can fracture under uneven pressure while in the green state.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove supports immediately\u003c\/strong\u003e using fine flush cutters. Mark support locations before removing from the build plate if needed for reference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash in dedicated IPA 95%\u003c\/strong\u003e — two sequential baths of 3–5 minutes each. Use IPA reserved exclusively for biocompatible resins. Brush gently inside the intaglio surface to remove residual resin from the margin area. \u003cstrong\u003eDo not over-wash\u003c\/strong\u003e — prolonged IPA exposure affects surface quality and can affect marginal dimensions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir dry completely\u003c\/strong\u003e using pressurized air before post-curing. Pay special attention to drying inside the crown intaglio surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-cure under UV — full cure for strength and biocompatibility.\u003c\/strong\u003e Use a rotating turntable curing station. Follow the manufacturer's validated time. Insufficient post-curing is the primary cause of premature fracture in 3D-printed temporaries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim and adjust margins\u003c\/strong\u003e using fine carbide or diamond burs. Check marginal seal on the die before proceeding to occlusal adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjust occlusion\u003c\/strong\u003e on the articulator and chairside with articulating paper. Eliminate high contacts carefully — thin areas near the margin are most vulnerable to fracture during adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolish to final gloss\u003c\/strong\u003e using rubber wheels (coarse → fine) and a polishing paste. A smooth, glossy surface reduces plaque retention and staining during the provisional period.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCement with a temporary cement\u003c\/strong\u003e appropriate for 3D-printed provisionals. Confirm cement compatibility before use — some temporary cements are not indicated for resin-based provisionals. Verify shade match before final seating.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!-- ============================================================\n     WHO IS THIS FOR\n     ============================================================ --\u003e\n\u003ch3\u003eWho Is This Resin For?\u003c\/h3\u003e\n\u003cp\u003eThis temporary crown and bridge resin is the right choice if:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou are a \u003cstrong\u003edentist or dental lab technician\u003c\/strong\u003e producing provisional single-unit crowns or multi-unit bridges for patients in the interim phase of restorative treatment — and you want to move that production to in-house 3D printing for same-day or next-day delivery.\u003c\/li\u003e\n\u003cli\u003eYour patients predominantly fall in the \u003cstrong\u003eA1 or A2 shade range\u003c\/strong\u003e — the most common tooth colors for light to medium natural dentition. These two shades cover the majority of anterior and posterior provisional cases in everyday practice.\u003c\/li\u003e\n\u003cli\u003eYou need a provisional material that delivers \u003cstrong\u003ereliable marginal fit, adequate fracture resistance, and natural-looking aesthetics\u003c\/strong\u003e without requiring complex post-processing or specialized equipment beyond a standard UV curing station and IPA wash setup.\u003c\/li\u003e\n\u003cli\u003eYou own a \u003cstrong\u003e385–405 nm DLP or monochrome LCD printer\u003c\/strong\u003e and want to expand your in-house production beyond models and surgical guides into direct patient-delivered restorations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis resin is NOT the right choice if\u003c\/strong\u003e you need a material for permanent definitive restorations, or if your patient requires a shade outside the A1\/A2 range. For surgical guide applications, see our \u003ca href=\"\/collections\/dental-surgical-resin\"\u003eDental Surgical Resin\u003c\/a\u003e collection. For dental model printing, see our \u003ca href=\"\/collections\/dental-model-resin\"\u003eDental Model Resin\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"Dental Mates","offers":[{"title":"A1","offer_id":52836226236710,"sku":"sku-42901263057105","price":119.0,"currency_code":"USD","in_stock":true},{"title":"A2","offer_id":52836226269478,"sku":"sku-42901263089873","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/7-1tempC_BResin.png?v=1773934363"},{"product_id":"surgical-guide-model-resin-transparent-for-dlp-and-lcd-printers","title":"Transparent Surgical Guide Resin for DLP \u0026 LCD Printers","description":"\u003c!-- ============================================================\n     supplies3d.shop — Product Description\n     Product : Surgical Guide Model Resin Transparent for DLP and LCD Printers\n     Silo    : Resinas\n     Tags    : #dental-surgical-resin · #dental-resin\n     Last updated: March 2026\n     ⚠️ Ver sección NOTAS DE IMPLEMENTACIÓN al final del archivo.\n     ============================================================ --\u003e\n\u003ch2\u003eBiocompatible, Autoclave-Verified, MMA-Free 3D Printing Resin for Implant Surgery Guides\u003c\/h2\u003e\n\u003cp\u003eA surgical guide is the most critical 3D-printed object in a dental implant workflow. It is placed in a patient's mouth during surgery and physically controls where and at what angle the surgeon drills into the bone. If the guide cracks, deforms, or interferes with visibility during the procedure, the consequences go well beyond a failed print. This transparent surgical guide resin is engineered specifically for that level of responsibility — delivering the dimensional accuracy, mechanical rigidity, optical clarity, and verified biocompatibility that implant surgery demands.\u003c\/p\u003e\n\u003cp\u003eWith autoclave sterilization verified, an MMA-free formulation, and high transparency that keeps the surgical field visible at all times, this resin meets the requirements of a real clinical surgical guide workflow — not just a lab model labeled as one.\u003c\/p\u003e\n\u003c!-- ============================================================\n     WARNINGS — HIGHEST CRITICALITY PRODUCT\n     ============================================================ --\u003e\n\u003ch3\u003e⚠️ Critical Clinical Information — Read Before Any Patient Use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e⚠️ Surgical guide resin is a patient-contact material used during surgery.\u003c\/strong\u003e Before delivering any 3D-printed surgical guide to a patient, confirm that the material's biocompatibility meets the applicable regulatory requirements in your jurisdiction (ISO 10993, FDA Class I, CE marking, or equivalent). Dental professionals bear full clinical and regulatory responsibility for all patient-contact devices. Request the current Safety Data Sheet (SDS) and biocompatibility certificate from your supplier. \u003c!-- IMPLEMENTACIÓN: Confirmar con el proveedor la clasificación regulatoria\n         exacta (CE Class I, FDA clearance, ISO 10993). Publicar esa información\n         prominentemente aquí una vez verificada. La imagen de parámetros\n         3-3_SURGICAL_RESIN-parameter.png puede contener esta información. --\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutoclave sterilization is required before surgical use.\u003c\/strong\u003e Every printed, washed, and post-cured guide must be autoclaved prior to entering the patient's mouth. The resin's autoclave compatibility has been verified — but sterilization is a mandatory step, not an optional one. Do not use a guide that has not been properly sterilized.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing is mandatory for biocompatibility.\u003c\/strong\u003e An uncured or under-cured guide retains free monomers that are cytotoxic. Full UV post-curing per the manufacturer's protocol is required before sterilization and patient delivery. Biocompatibility is achieved through the combination of the resin formulation AND proper post-processing — neither alone is sufficient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV wavelength:\u003c\/strong\u003e Compatible with DLP and monochrome LCD printers in the 385–405 nm range. Confirm your printer's light source wavelength before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePPE required during fabrication:\u003c\/strong\u003e Wear nitrile gloves and safety glasses when handling uncured resin. Transparent resins can be harder to see on surfaces — exercise extra care to avoid skin contact. Work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake before every use:\u003c\/strong\u003e Transparent resins can stratify over time. Mix thoroughly before pouring into the vat to ensure consistent optical properties and curing behavior across the build plate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     WHAT IS A SURGICAL GUIDE — EXPLAINED SIMPLY\n     ============================================================ --\u003e\n\u003ch3\u003eWhat Is a Surgical Guide and Why Does Every Property of This Resin Matter?\u003c\/h3\u003e\n\u003cp\u003eImagine you need to place a screw in exactly the right spot in a piece of wood — not approximately right, but with less than a millimeter of tolerance. You would use a drill guide: a jig that holds the drill at the precise angle and position before you start. A dental surgical guide works the same way, except the \"wood\" is a patient's jawbone, and the \"screw\" is a titanium implant that has to integrate with bone and support a permanent restoration. Every millimeter of deviation from the planned trajectory changes the outcome of the surgery.\u003c\/p\u003e\n\u003cp\u003eThat is why every material property of this resin has a direct clinical consequence:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensional stability\u003c\/strong\u003e means the guide fits the patient's anatomy exactly as planned in the software — no distortion from printing or curing that shifts the drill sleeve position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mechanical stability\u003c\/strong\u003e means the guide does not flex or crack under the lateral forces of the drill and handpiece during the osteotomy — maintaining the planned trajectory through the entire procedure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh transparency\u003c\/strong\u003e means the surgeon can see the soft tissue, the gingival margin, and the reference landmarks through the guide at all times — critical for confirming seating, monitoring tissue response, and maintaining spatial orientation during surgery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutoclave verification\u003c\/strong\u003e means the guide can be steam-sterilized at 121°C or 134°C without warping or losing mechanical properties — the only accepted sterilization standard for intraoral surgical devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMMA-free formulation\u003c\/strong\u003e means no methyl methacrylate in the formula — eliminating the most common allergen and irritant found in dental resins, and reducing risk for both the patient and the lab technician handling the resin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBiocompatible\u003c\/strong\u003e means the cured and properly post-processed guide does not cause cytotoxicity, sensitization, or irritation when in contact with oral tissue during surgery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     KEY FEATURES — FULL BREAKDOWN\n     ============================================================ --\u003e\n\u003ch3\u003eFull Feature Breakdown\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eWhat It Means in Practice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional Stability\u003c\/td\u003e\n\u003ctd\u003eThe guide matches the planned geometry from your implant planning software with minimal deviation — ensuring the drill sleeve sits exactly where intended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh Mechanical Stability\u003c\/td\u003e\n\u003ctd\u003eResists the lateral forces of drilling without flexing or fracturing — maintains planned angulation through the full osteotomy depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh Transparency\u003c\/td\u003e\n\u003ctd\u003eClear optical properties let the surgeon monitor tissue position and guide seating in real time — no visual obstruction during the procedure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutoclaving Verified\u003c\/td\u003e\n\u003ctd\u003eSteam sterilization at 121°C \/ 134°C confirmed — the guide does not warp, discolor, or lose structural integrity through the sterilization cycle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBiocompatible\u003c\/td\u003e\n\u003ctd\u003eNon-cytotoxic, non-sensitizing, non-irritating when fully post-cured and sterilized per protocol — safe for intraoral surgical contact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMMA Free\u003c\/td\u003e\n\u003ctd\u003eNo methyl methacrylate — eliminates the most common dental resin allergen; safer for sensitized patients and lab technicians\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh Building Speed\u003c\/td\u003e\n\u003ctd\u003eFast layer-by-layer curing reduces total print time per guide — important for same-day and urgent surgical workflows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow Material Consumption\u003c\/td\u003e\n\u003ctd\u003eEfficient resin usage per guide — reduces per-unit cost and minimizes vat waste on a premium-priced material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh Yield Rate\u003c\/td\u003e\n\u003ctd\u003eConsistent build success across the platform — predictable results reduce reprints and wasted resin on a $229 bottle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVivid Detail Restoration\u003c\/td\u003e\n\u003ctd\u003eReproduces fine surface features including tissue stop ledges, drill sleeve seats, and reference point geometry with the precision surgical guidance requires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     TECHNICAL APPLICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eSurgical and Clinical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFully guided implant placement surgical guides (tooth-supported, mucosa-supported, bone-supported)\u003c\/li\u003e\n\u003cli\u003ePilot drill guides and multi-unit implant surgical templates\u003c\/li\u003e\n\u003cli\u003eAll-on-X full-arch guided surgical templates\u003c\/li\u003e\n\u003cli\u003eImmediate loading surgical guides\u003c\/li\u003e\n\u003cli\u003eBone reduction guides for ridge preparation\u003c\/li\u003e\n\u003cli\u003eOrthodontic miniscrew placement guides\u003c\/li\u003e\n\u003cli\u003eEndodontic access guides\u003c\/li\u003e\n\u003cli\u003eX-ray fiducial markers and radiographic templates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     TECHNICAL SPECIFICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Technologies\u003c\/td\u003e\n\u003ctd\u003eDLP, Monochrome LCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength Range\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor \/ Appearance\u003c\/td\u003e\n\u003ctd\u003eTransparent \/ Clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBiocompatibility\u003c\/td\u003e\n\u003ctd\u003eBiocompatible — verify certification documentation with supplier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMMA Content\u003c\/td\u003e\n\u003ctd\u003eMMA-Free — no methyl methacrylate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutoclave Sterilization\u003c\/td\u003e\n\u003ctd\u003eVerified — steam sterilization compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional Stability\u003c\/td\u003e\n\u003ctd\u003eHigh — low shrinkage, surgery-grade dimensional accuracy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical Stability\u003c\/td\u003e\n\u003ctd\u003eHigh — resists drill forces without fracture or flex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntraoral Use\u003c\/td\u003e\n\u003ctd\u003eYes — intraoral surgical use (verify regulatory documentation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-Cure Required\u003c\/td\u003e\n\u003ctd\u003eYes — mandatory for biocompatibility activation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWash Method\u003c\/td\u003e\n\u003ctd\u003eIPA 95% or ethanol — two sequential wash cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessing Temperature\u003c\/td\u003e\n\u003ctd\u003e20–30°C (68–86°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     PRINT SETTINGS\n     ============================================================ --\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cp\u003eSurgical guides require higher dimensional precision than lab models. Over-exposure causes dimensional blooming that affects drill sleeve fit and guide seating — the sleeve will be tight or impossible to insert if walls are over-cured. Always verify drill sleeve fit on a test guide before printing a patient-specific appliance.\u003c\/p\u003e\n\u003c!-- IMPLEMENTACIÓN: Imagen 3-3_SURGICAL_RESIN-parameter.png en el listing de\n     Dental Mates puede contener los valores de print settings del fabricante.\n     Revisar y reemplazar los valores orientativos de esta tabla con los\n     confirmados. Algunos fabricantes de guías también especifican compensation\n     factors para el diámetro de los sleeves — incluir si están disponibles. --\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting\u003c\/th\u003e\n\u003cth\u003eRecommended Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Height\u003c\/td\u003e\n\u003ctd\u003e0.05 mm – 0.10 mm — finer layers improve sleeve hole accuracy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNormal Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e2–5 s — start conservative to avoid dimensional blooming on sleeve seats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e20–40 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Bottom Layers\u003c\/td\u003e\n\u003ctd\u003e3–5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Speed\u003c\/td\u003e\n\u003ctd\u003eModerate — transparent resins typically release cleanly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuide Orientation\u003c\/td\u003e\n\u003ctd\u003eOcclusal surface facing down, angled 30–45° — improves tissue stop accuracy and reduces support on critical surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport Strategy\u003c\/td\u003e\n\u003ctd\u003eLight supports on non-tissue-contact surfaces only — never place supports on the tissue-adapted fitting surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Aliasing\u003c\/td\u003e\n\u003ctd\u003eEnabled — critical for accurate cylindrical sleeve geometry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     POST-PROCESSING — DETAILED CLINICAL PROTOCOL\n     ============================================================ --\u003e\n\u003ch3\u003ePost-Processing Protocol — Every Step Is Clinically Mandatory\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove from build plate\u003c\/strong\u003e carefully. Transparent resins can be difficult to see on the platform — handle slowly to avoid breaking thin guide walls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove supports immediately\u003c\/strong\u003e before the first wash, using flush cutters. Work carefully around drill sleeve housings and tissue-contact surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash in IPA 95% or ethanol\u003c\/strong\u003e — two sequential wash cycles of 3–5 minutes each in fresh solvent. Use an ultrasonic cleaner for best residue removal. Rinse thoroughly between cycles. Inspect for visible glossy spots (uncured resin) — repeat if needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir dry completely\u003c\/strong\u003e with pressurized air before post-curing. Residual solvent on the surface during UV curing creates optical hazing that reduces transparency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-cure under UV — full cure on all surfaces.\u003c\/strong\u003e Use a rotating turntable curing station. Post-curing time depends on station power — follow the manufacturer's validated protocol. This step is mandatory for biocompatibility: the guide is not safe for patient contact until it is fully post-cured.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolish support nubs\u003c\/strong\u003e from the tissue-contact surface using fine-grit sandpaper, progressing to a smooth finish. Any roughness on the tissue-facing surface creates pressure points against the gingiva during surgery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify drill sleeve fit\u003c\/strong\u003e on an articulated model before sterilization. Sleeves should seat fully and rotate smoothly. Tight seats indicate over-exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutoclave sterilize\u003c\/strong\u003e per the validated protocol (typically 121°C or 134°C steam sterilization) immediately before surgery. Do not store sterilized guides for extended periods — sterilize and use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!-- ============================================================\n     WHO IS THIS FOR\n     ============================================================ --\u003e\n\u003ch3\u003eWho Is This Resin For?\u003c\/h3\u003e\n\u003cp\u003eThis transparent surgical guide resin is the right choice if:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou are an \u003cstrong\u003eoral surgeon, implantologist, or periodontist\u003c\/strong\u003e — or the lab technician serving them — producing patient-specific guided implant surgery templates that will be used intraorally during the osteotomy procedure.\u003c\/li\u003e\n\u003cli\u003eYou require \u003cstrong\u003eautoclave-verified sterilization\u003c\/strong\u003e for your surgical guides — eliminating the risk of using resins that warp, discolor, or lose dimensional integrity through the sterilization cycle.\u003c\/li\u003e\n\u003cli\u003eYou have patients with \u003cstrong\u003eknown MMA sensitivity\u003c\/strong\u003e or you work in a lab environment where reducing allergen exposure is a priority — the MMA-free formulation directly addresses both concerns.\u003c\/li\u003e\n\u003cli\u003eYou own a \u003cstrong\u003e385–405 nm DLP or monochrome LCD printer\u003c\/strong\u003e and need a resin that performs at surgical-grade clinical standards — not a generic transparent resin used as a surgical guide substitute.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis resin is NOT the right choice if\u003c\/strong\u003e you are printing lab reference models or diagnostic study models that do not require intraoral or surgical use — for those applications, our \u003ca href=\"\/collections\/dental-model-resin\"\u003eDental Model Resin\u003c\/a\u003e collection offers the same accuracy at a lower price point. For denture base applications, see our \u003ca href=\"\/collections\/dental-resin\"\u003eDental Resin\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"Dental Mates","offers":[{"title":"Default Title","offer_id":52836226892070,"sku":"sku-42544764813521","price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/3-3_SURGICAL_RESIN.png?v=1773934418"},{"product_id":"biocompatible-hard-splint-resin-for-dlp-and-lcd-printers-500ml-500gram","title":"Biocompatible Hard Splint Resin for DLP and LCD Printers (500ml\/500gram)","description":"\u003c!-- ============================================================\n     supplies3d.shop — Product Description\n     Product : Biocompatible Hard Splint Resin for DLP and LCD Printers 500ml \/ 500g\n     Silo    : Resinas\n     Tags    : #dental-resin\n     Last updated: March 2026\n     ⚠️ Ver sección NOTAS DE IMPLEMENTACIÓN al final del archivo.\n     ============================================================ --\u003e\n\u003ch2\u003e3D Print Durable Occlusal Splints and Night Guards \u003c\/h2\u003e\n\u003cp\u003eIf your patients grind their teeth at night, clench during the day, or suffer from jaw pain caused by TMJ disorders, a well-fitting hard occlusal splint is one of the most effective treatments available. This biocompatible hard splint resin lets you fabricate those splints digitally — directly from a scan and CAD file — using your DLP or monochrome LCD printer. No more sending impressions to an outside lab and waiting days. You design it, you print it, you deliver it.\u003c\/p\u003e\n\u003cp\u003eThe \"hard\" in hard splint matters. Unlike flexible night guard materials, a hard acrylic-style splint provides a rigid, stable occlusal platform that allows the jaw muscles to fully relax and prevents the uneven tooth wear that bruxism causes over time. This resin is formulated to deliver exactly that: rigid, wear-resistant, precisely fitting appliances that hold their shape through months of nightly use.\u003c\/p\u003e\n\u003c!-- ============================================================\n     WARNINGS\n     ============================================================ --\u003e\n\u003ch3\u003e⚠️ Critical Information Before Clinical Use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e⚠️ This appliance is worn inside the patient's mouth.\u003c\/strong\u003e Before delivering any 3D-printed splint to a patient, confirm that this material's biocompatibility has been validated according to ISO 10993 or equivalent standards applicable in your jurisdiction. Dental professionals bear full clinical and regulatory responsibility for patient-contact materials. Request the current Safety Data Sheet (SDS) and biocompatibility documentation from your supplier before clinical use. \u003c!-- IMPLEMENTACIÓN: Confirmar con el proveedor si este producto tiene certificación\n         ISO 10993, FDA clearance, CE Class I o IIa, o equivalente. Publicar esa\n         información de forma prominente en esta sección una vez verificada. --\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing is mandatory — not optional.\u003c\/strong\u003e Uncured or under-cured resin retains free monomers that are toxic to oral tissues. A splint that is not fully post-cured is not biocompatible, regardless of what the resin is rated to be. Full post-cure per the manufacturer's protocol is required before every patient delivery. No exceptions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV wavelength:\u003c\/strong\u003e Compatible with DLP and monochrome LCD printers in the 385–405 nm range. Confirm your printer's light source wavelength before purchasing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessing temperature:\u003c\/strong\u003e Print and handle resin at room temperature, between 20–30°C (68–86°F). Cold resin increases viscosity and leads to poor layer adhesion and failed builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePPE required during fabrication:\u003c\/strong\u003e Wear nitrile gloves and safety glasses when handling uncured resin. Uncured photopolymer is a skin and eye irritant. Work in a well-ventilated space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake before every use:\u003c\/strong\u003e Mix the resin thoroughly before pouring into the vat. Settled pigment and photoinitiators cause inconsistent curing and color variation across the build plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Store sealed, below 25°C (77°F), away from direct light. Exposure to ambient UV light will begin curing the resin in the bottle, reducing shelf life and print quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     WHAT IS A HARD SPLINT — EXPLAINED SIMPLY\n     ============================================================ --\u003e\n\u003ch3\u003eWhat Is a Hard Occlusal Splint and Why Does the Resin Matter?\u003c\/h3\u003e\n\u003cp\u003eThink of a hard splint like a custom-fitted mouthguard made of rigid plastic — but much more precise. It sits over the upper or lower teeth and creates a smooth, flat surface that the opposing teeth bite against. This does two things: it stops the teeth from grinding directly against each other, and it gives the jaw muscles a neutral position to rest in, which reduces tension and pain.\u003c\/p\u003e\n\u003cp\u003eThe reason the resin matters is simple: the splint needs to survive months of nightly grinding pressure without cracking, warping, or developing rough spots that irritate the gum tissue. A resin that is too brittle shatters. A resin that is too soft develops wear grooves. This hard splint resin is formulated to hit the right balance — rigid enough to protect teeth, tough enough to last, and smooth enough to stay comfortable.\u003c\/p\u003e\n\u003c!-- ============================================================\n     KEY FEATURES\n     ============================================================ --\u003e\n\u003ch3\u003eKey Material Properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh rigidity — the foundation of effective splint therapy:\u003c\/strong\u003e The cured resin provides a hard, stable occlusal surface that prevents uneven wear and distributes bite forces evenly across the arch, which is exactly what's needed for bruxism and TMD management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent wear resistance:\u003c\/strong\u003e Formulated to withstand repeated grinding and clenching cycles without developing deep wear grooves that would compromise occlusal balance and patient comfort over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh dimensional accuracy:\u003c\/strong\u003e Prints with tight tolerances that translate to accurate fit on articulated models — reducing chairside adjustment time and delivering a better first-fit for the patient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolishable surface:\u003c\/strong\u003e The cured material accepts standard dental polishing protocols, allowing the lab or clinician to achieve a smooth, glossy finish that is both comfortable against soft tissue and easy for the patient to keep clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBiocompatible formulation:\u003c\/strong\u003e Designed for extended intraoral contact — the type of exposure a nightly splint sees over months of use. Full post-curing per protocol is required to activate these properties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-house production efficiency:\u003c\/strong\u003e Print multiple splints per build, reducing turnaround from days to hours and eliminating lab outsourcing costs for this appliance type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     CLINICAL APPLICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eClinical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHard occlusal splints for bruxism (nighttime teeth grinding)\u003c\/li\u003e\n\u003cli\u003eStabilization splints for temporomandibular joint (TMJ) disorders\u003c\/li\u003e\n\u003cli\u003eMichigan-style and flat-plane occlusal splints\u003c\/li\u003e\n\u003cli\u003eHard night guards for clenching and daytime parafunctional habits\u003c\/li\u003e\n\u003cli\u003eAnterior deprogrammers and Lucia jigs\u003c\/li\u003e\n\u003cli\u003eOrthopedic repositioning appliances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     TECHNICAL SPECIFICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Technologies\u003c\/td\u003e\n\u003ctd\u003eDLP, Monochrome LCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength Range\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight \/ Volume\u003c\/td\u003e\n\u003ctd\u003e500 g \/ 500 ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResin Type\u003c\/td\u003e\n\u003ctd\u003eHard — rigid occlusal appliance material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntraoral Use\u003c\/td\u003e\n\u003ctd\u003eYes — verify biocompatibility documentation before patient delivery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessing Temperature\u003c\/td\u003e\n\u003ctd\u003e20–30°C (68–86°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWash Method\u003c\/td\u003e\n\u003ctd\u003eIsopropyl Alcohol (IPA) or 95% Ethanol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-Cure Required\u003c\/td\u003e\n\u003ctd\u003eYes — mandatory for biocompatibility and final mechanical properties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003eBelow 25°C (77°F), away from light and heat sources\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     PRINT SETTINGS\n     ============================================================ --\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cp\u003eHard splint resins require accurate exposure calibration to achieve both dimensional precision and a polishable surface. Over-exposure creates dimensional blooming that affects splint fit; under-exposure creates a weak, brittle appliance. Always run a test calibration print and check fit on an articulated model before committing to a patient build.\u003c\/p\u003e\n\u003c!-- IMPLEMENTACIÓN: La imagen de parámetros del producto (1HARDSPILNTRESIN-parameter.png)\n     en el listing de Dental Mates probablemente contiene los valores específicos del\n     fabricante. Revisar esa imagen y reemplazar los valores orientativos de esta\n     tabla con los confirmados del fabricante. --\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting\u003c\/th\u003e\n\u003cth\u003eRecommended Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Height\u003c\/td\u003e\n\u003ctd\u003e0.05 mm – 0.10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNormal Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e2–5 s (adjust per printer power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e25–45 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Bottom Layers\u003c\/td\u003e\n\u003ctd\u003e3–5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Speed\u003c\/td\u003e\n\u003ctd\u003eModerate — hard resins tolerate standard lift speeds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSplint Orientation\u003c\/td\u003e\n\u003ctd\u003eAngled 30–45° — reduces peel forces and improves occlusal surface accuracy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport Strategy\u003c\/td\u003e\n\u003ctd\u003eLight supports on palatal\/lingual surface — keep occlusal surface support-free for fit accuracy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Aliasing\u003c\/td\u003e\n\u003ctd\u003eEnabled — critical for smooth occlusal contact surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     POST-PROCESSING\n     ============================================================ --\u003e\n\u003ch3\u003ePost-Processing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove from build plate\u003c\/strong\u003e carefully using a metal spatula. Support the appliance as it releases to avoid flexing thin sections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash in IPA or 95% ethanol.\u003c\/strong\u003e Use an ultrasonic bath for best results: two sequential washes of approximately 3–5 minutes each in fresh solvent. Agitate gently. Avoid washing longer than 10 minutes total — prolonged IPA exposure can create micro-cracks in rigid resins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir dry completely\u003c\/strong\u003e — minimum 5 minutes — before post-curing. Residual IPA on the surface during UV exposure interferes with the final surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-cure under UV\u003c\/strong\u003e per the manufacturer's specified time and temperature. ⚠️ This step is mandatory for biocompatibility — it removes residual unpolymerized monomers that would otherwise be in contact with oral tissue. Cure completely on all surfaces. Rotating turntable curing stations are recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove supports\u003c\/strong\u003e and finish the occlusal surface with dental burs and polishing wheels. Sand progressively from coarse to fine grit, then polish with a pumice-based compound to achieve the smooth, glossy finish required for patient comfort and easy home cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify fit on model\u003c\/strong\u003e before patient delivery. Check occlusal contacts with articulating paper and adjust as needed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!-- ============================================================\n     WHO IS THIS FOR\n     ============================================================ --\u003e\n\u003ch3\u003eWho Is This Resin For?\u003c\/h3\u003e\n\u003cp\u003eThis hard splint resin is the right choice if:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou are a \u003cstrong\u003edental clinician or lab technician\u003c\/strong\u003e producing hard occlusal splints, night guards, or stabilization appliances for patients with bruxism, clenching, or TMD — and you want to bring that production in-house digitally.\u003c\/li\u003e\n\u003cli\u003eYou are currently \u003cstrong\u003eoutsourcing splint fabrication\u003c\/strong\u003e to an outside lab and want to reduce turnaround time and cost by printing directly from your own DLP or LCD printer.\u003c\/li\u003e\n\u003cli\u003eYou own a \u003cstrong\u003e385–405 nm DLP or monochrome LCD printer\u003c\/strong\u003e — including printers like Elegoo Saturn, Anycubic Photon Mono, Phrozen Sonic, SprintRay, Asiga, or similar open-platform dental printers.\u003c\/li\u003e\n\u003cli\u003eYou need a \u003cstrong\u003e500g \/ 500ml format\u003c\/strong\u003e — ideal for clinics and small labs with moderate splint volume, or for testing a new resin before committing to larger quantities.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis resin is NOT the right choice if\u003c\/strong\u003e you need a soft or semi-flexible night guard material for patients who cannot tolerate rigid appliances, or if you need a resin with specific flexibility for repositioning or functional appliances. For surgical applications, see our \u003ca href=\"\/collections\/dental-surgical-resin\"\u003eDental Surgical Resin\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"Dental Mates","offers":[{"title":"Default Title","offer_id":52836227776806,"sku":"sku-42676492861649","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/1HARDSPILNTRESIN.png?v=1773934452"},{"product_id":"invisible-denture-base-resin-for-dlp-and-lcd-printers-500g-or-500ml","title":"Invisible Denture Base Resin for DLP and LCD Printers 500g or 500ml","description":"\u003c!-- ============================================================\n     supplies3d.shop — Product Description\n     Product : Invisible Denture Base Resin for DLP and LCD Printers 500g \/ 500ml\n     Silo    : Resinas\n     Tags    : #dental-resin\n     Last updated: March 2026\n     ⚠️ NOTA IMPLEMENTACIÓN: Ver sección de notas al final del archivo.\n     ============================================================ --\u003e\n\u003ch2\u003eFlexible, Tissue-Matching 3D Printing Resin for Clasp-Free Removable Dentures\u003c\/h2\u003e\n\u003cp\u003eThis invisible denture base resin is engineered for dental laboratories and clinicians producing removable partial or full dentures without metal clasps. The \"invisible\" in the name refers to exactly that: the elastic nature of this resin grips the natural undercuts of the oral anatomy for retention — no visible metal hardware needed. The result is a denture that is lighter, more discreet, and more comfortable for the patient than traditional acrylic or metal-frame alternatives.\u003c\/p\u003e\n\u003cp\u003eThe gum-matched translucent tone blends naturally with surrounding soft tissue, making the denture virtually undetectable during wear and dramatically improving patient acceptance — especially for anterior partial cases where aesthetics are non-negotiable.\u003c\/p\u003e\n\u003c!-- ============================================================\n     WARNINGS — CRITICAL FOR INTRAORAL PRODUCT\n     ============================================================ --\u003e\n\u003ch3\u003e⚠️ Critical Information Before Clinical Use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e⚠️ Verify biocompatibility documentation before patient use.\u003c\/strong\u003e This resin is intended to be worn inside a patient's mouth. Before dispensing any 3D-printed denture to a patient, confirm that the material's biocompatibility has been validated per ISO 10993 or equivalent standards applicable in your jurisdiction. Dental professionals bear full clinical and regulatory responsibility for patient-contact materials. Contact the supplier for the current Safety Data Sheet (SDS) and any available biocompatibility certificates. \u003c!-- IMPLEMENTACIÓN: Confirmar con el proveedor si este producto tiene certificación\n         ISO 10993, FDA clearance, CE marking o equivalente. Añadir esa información\n         de forma prominente aquí una vez verificada. Si no existe certificación,\n         reconsiderar el copy de uso intraoral. --\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV wavelength:\u003c\/strong\u003e Compatible with DLP and monochrome LCD printers in the 385–405 nm range. Verify your printer's light source before purchasing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing is mandatory for patient safety.\u003c\/strong\u003e Uncured or under-cured resin retains unpolymerized monomers that can cause oral tissue irritation or allergic reactions. Full post-cure per the manufacturer's protocol is required before any patient delivery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePPE required during fabrication:\u003c\/strong\u003e Wear nitrile gloves and safety glasses when handling uncured resin. Uncured photopolymer is a skin and eye irritant. Work in a well-ventilated area and keep resin away from food, beverages, and children.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake before every use:\u003c\/strong\u003e Pigments and photoinitiators settle over time. Mix thoroughly before pouring into the vat. Inconsistent mixing results in color variation and unreliable print performance across the build plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Keep tightly sealed in a cool, dark place away from heat sources and direct sunlight. Exposure to ambient light will partially cure the resin in the bottle. Shelf life is typically 12 months from manufacture when stored correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     WHAT \"INVISIBLE DENTURE\" MEANS\n     ============================================================ --\u003e\n\u003ch3\u003eWhat Makes This an \"Invisible\" Denture Resin?\u003c\/h3\u003e\n\u003cp\u003eTraditional removable partial dentures use metal clasps to grip adjacent teeth for retention. Those clasps are visible when the patient speaks or smiles — a major aesthetic concern, particularly in anterior areas. Invisible denture resins solve this by using the material's controlled elasticity to snap into and grip natural undercuts in the oral anatomy, holding the appliance in place without any metal framework.\u003c\/p\u003e\n\u003cp\u003eThink of it like a flexible phone case that grips its shape around the phone — the elastic memory of the resin does the retention work. The denture can be inserted and removed by the patient, but stays securely in place during normal function.\u003c\/p\u003e\n\u003c!-- ============================================================\n     KEY FEATURES\n     ============================================================ --\u003e\n\u003ch3\u003eKey Material Properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTissue-matched translucency:\u003c\/strong\u003e The gum-toned, semi-translucent color mimics the optical behavior of natural gingival tissue — it diffuses light rather than blocking it, which is what makes the denture look like soft tissue rather than plastic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControlled elasticity for clasp-free retention:\u003c\/strong\u003e The cured resin has enough flex to engage anatomical undercuts for retention without requiring rigid metal clasps — eliminating the most visible component of traditional partial dentures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWear resistance:\u003c\/strong\u003e Formulated to withstand long-term chewing forces and daily insertion\/removal cycles without cracking, deforming, or losing retention over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight comfort:\u003c\/strong\u003e Significantly lighter than metal-frame alternatives, reducing the burden on the residual ridge and improving patient compliance, especially for full-time wear cases.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow viscosity formulation:\u003c\/strong\u003e Flows cleanly off printed surfaces back into the vat after printing, making cleanup faster and reducing resin waste per build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh surface detail:\u003c\/strong\u003e Reproduces fine gingival texture and contour detail needed for natural emergence profiles and patient-accepted aesthetics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     APPLICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eClinical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable partial dentures (RPD) without metal clasps — anterior and posterior\u003c\/li\u003e\n\u003cli\u003eFull removable dentures requiring tissue-matched aesthetics\u003c\/li\u003e\n\u003cli\u003eImplant-retained overdenture bases\u003c\/li\u003e\n\u003cli\u003eCleft palate prosthetics and obturators\u003c\/li\u003e\n\u003cli\u003eTry-in denture bases for patient approval prior to final fabrication\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     TECHNICAL SPECIFICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Technologies\u003c\/td\u003e\n\u003ctd\u003eDLP, Monochrome LCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength Range\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight \/ Volume\u003c\/td\u003e\n\u003ctd\u003e500 g \/ 500 ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor \/ Appearance\u003c\/td\u003e\n\u003ctd\u003eTranslucent gum tone — tissue-matching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexibility\u003c\/td\u003e\n\u003ctd\u003eElastic — designed for clasp-free retention\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntraoral Use\u003c\/td\u003e\n\u003ctd\u003eIntended for intraoral use — verify biocompatibility certification before patient delivery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWash Method\u003c\/td\u003e\n\u003ctd\u003eIsopropyl Alcohol (IPA) or 95% Ethanol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-Cure Required\u003c\/td\u003e\n\u003ctd\u003eYes — UV curing station required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003eBelow 25°C (77°F), away from light and heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf Life\u003c\/td\u003e\n\u003ctd\u003e12 months from manufacture (sealed, stored correctly)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     PRINT SETTINGS\n     ============================================================ --\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cp\u003e⚠️ Flexible denture base resins require specific tuning compared to rigid dental resins. The elasticity of the material makes it more sensitive to over-exposure, which reduces flexibility in the final part. Always run a calibration print before producing patient appliances, and verify flexibility and color by handling the cured test piece before committing to a full denture build. \u003c!-- IMPLEMENTACIÓN: La imagen de parámetros del producto (6-11invisibledenturebase-parameter.png)\n       en el listing de Dental Mates puede contener valores específicos del fabricante.\n       Revisar esa imagen y reemplazar los valores orientativos de esta tabla con los del\n       fabricante una vez verificados. --\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting\u003c\/th\u003e\n\u003cth\u003eRecommended Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Height\u003c\/td\u003e\n\u003ctd\u003e0.05 mm – 0.10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNormal Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e2–6 s — start low to preserve elasticity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e20–40 s (adjust per printer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Bottom Layers\u003c\/td\u003e\n\u003ctd\u003e3–5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Speed\u003c\/td\u003e\n\u003ctd\u003eSlow — elastic materials are more prone to delamination at fast lift speeds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Orientation\u003c\/td\u003e\n\u003ctd\u003eAngled 30–45° — reduces peel forces and suction on thin flange sections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport Strategy\u003c\/td\u003e\n\u003ctd\u003eLight supports with thin tips (0.4–0.5 mm) — easy removal preserves surface finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Aliasing\u003c\/td\u003e\n\u003ctd\u003eEnabled — improves surface smoothness on curved gingival contours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     POST-PROCESSING\n     ============================================================ --\u003e\n\u003ch3\u003ePost-Processing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove from build plate\u003c\/strong\u003e carefully. Flexible resins can deform under excessive spatula pressure — work slowly and support the part as it releases.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove supports immediately\u003c\/strong\u003e while the part is still slightly green-state (pre-post-cure), as flexible materials become harder to trim cleanly after full curing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash in IPA or 95% ethanol\u003c\/strong\u003e for 5–10 minutes using an ultrasonic bath or gentle agitation. Do not over-wash — prolonged IPA exposure can affect the surface and mechanical properties of elastic resins. Use fresh solvent for the final rinse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir dry completely\u003c\/strong\u003e before post-curing. Residual IPA on the surface during UV curing can interfere with the final surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-cure under UV\u003c\/strong\u003e per the manufacturer's recommended time and temperature. ⚠️ Do not over-cure — excessive UV exposure reduces elasticity and can make the denture base brittle, defeating its primary retention mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolish and finish\u003c\/strong\u003e using standard dental polishing protocols. Verify the final flexibility and fit on the cast before patient delivery.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!-- ============================================================\n     WHO IS THIS FOR\n     ============================================================ --\u003e\n\u003ch3\u003eWho Is This Resin For?\u003c\/h3\u003e\n\u003cp\u003eThis invisible denture base resin is the right choice if:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou work in a \u003cstrong\u003edental laboratory or clinic\u003c\/strong\u003e producing removable partial or full dentures for patients who want an aesthetic, metal-free solution.\u003c\/li\u003e\n\u003cli\u003eYour patients are \u003cstrong\u003econcerned about visible metal clasps\u003c\/strong\u003e in anterior areas, or have nickel\/metal sensitivities that rule out traditional framework designs.\u003c\/li\u003e\n\u003cli\u003eYou own a \u003cstrong\u003e385–405 nm DLP or monochrome LCD printer\u003c\/strong\u003e and want to expand your digital denture workflow beyond rigid acrylic.\u003c\/li\u003e\n\u003cli\u003eYou are looking for a \u003cstrong\u003e500g \/ 500ml bottle\u003c\/strong\u003e — ideal for laboratories with moderate volume denture production that want a smaller format before committing to larger quantities.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis resin is NOT the right choice if\u003c\/strong\u003e you need a rigid denture base with higher flexural strength for full-arch implant-supported cases, or if you require a material with verified biocompatibility documentation for your regulatory environment and that documentation is not yet confirmed for this product. For surgical or biocompatible applications, see our \u003ca href=\"\/collections\/dental-surgical-resin\"\u003eDental Surgical Resin\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"Dental Mates","offers":[{"title":"Default Title","offer_id":52836227940646,"sku":"sku-42676460978385","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/6-11invisibledenturebase.png?v=1773934472"},{"product_id":"shining3d-dm12-implant-model","title":"Shining3D DM12 Dental Model Resin","description":"\u003c!-- ============================================================\n     supplies3d.shop — Product Description\n     Product : Shining3D DM12 Dental Implant Model Resin (Yellow)\n     Brand   : SHINING 3D\n     Silo    : Resinas\n     Tags    : #dental-resin · #dental-model-resin\n     Last updated: March 2026\n     ============================================================ --\u003e\n\u003ch2\u003eHigh-Precision 3D Printing Resin for Crown \u0026amp; Bridge Models\u003c\/h2\u003e\n\u003cp\u003eThe Shining3D DM12 is a professional photopolymer resin designed from the ground up for dental laboratory workflows. It is the direct evolution of the DM11, re-engineered with a higher flexural modulus and lower elasticity to solve the one problem that matters most in crown and bridge work: model distortion. When a model flexes during die separation or crown seating, the fit suffers. The DM12 eliminates that variable — delivering stable, accurate, abrasion-resistant models that hold their geometry through every step of the finishing process.\u003c\/p\u003e\n\u003c!-- ============================================================\n     WARNINGS\n     ============================================================ --\u003e\n\u003ch3\u003e⚠️ Before You Print — Read This First\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for intraoral use.\u003c\/strong\u003e The DM12 is a dental lab modeling resin only. It must never be placed inside a patient's mouth. For biocompatible or surgical applications, see our \u003ca href=\"\/collections\/dental-surgical-resin\"\u003eDental Surgical Resin\u003c\/a\u003e collection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e405 nm UV light required.\u003c\/strong\u003e The DM12 is formulated for 405 nm DLP and LCD printers. Verify your printer's light source wavelength before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint at room temperature:\u003c\/strong\u003e Work in an environment between 20–30°C (68–86°F). Cold resin thickens, causing drainage issues, adhesion failures, and inconsistent layer exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePPE is non-negotiable:\u003c\/strong\u003e Always wear nitrile gloves and safety glasses when handling uncured resin. Uncured photopolymer is a skin and eye irritant. Work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix before every session:\u003c\/strong\u003e Pigment and photoinitiators settle over time. Shake and stir thoroughly before pouring into the vat to ensure uniform color, reactivity, and print quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing is required:\u003c\/strong\u003e Parts must be washed and UV-cured after printing to achieve their final hardness and stability. An uncured model will remain soft, sticky, and dimensionally unreliable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     DM12 vs DM11 — THE UPGRADE EXPLAINED\n     ============================================================ --\u003e\n\u003ch3\u003eDM12 vs. DM11 — What Changed and Why It Matters for Your Workflow\u003c\/h3\u003e\n\u003cp\u003eIf you have used the DM11 before, here is the practical difference: the DM11 had slightly more flexibility, which is useful for some applications but can introduce subtle warping when you are seating a crown or separating a die under pressure. Think of flexural modulus as the material's resistance to bending — the higher it is, the stiffer and more stable the model stays during mechanical stress. The DM12 raises that stiffness while retaining just enough controlled elasticity so it doesn't become brittle.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDM11\u003c\/th\u003e\n\u003cth\u003eDM12\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Modulus\u003c\/td\u003e\n\u003ctd\u003eLower\u003c\/td\u003e\n\u003ctd\u003eHigher — less bend under pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElasticity\u003c\/td\u003e\n\u003ctd\u003eHigher\u003c\/td\u003e\n\u003ctd\u003eLower — less spring-back during seating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbrasion Resistance\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eImproved — handles seating \u0026amp; finishing without surface degradation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eLow — faster drainage, easier cleanup, less resin waste\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eVaries\u003c\/td\u003e\n\u003ctd\u003eYellow — maximum margin line contrast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     KEY FEATURES\n     ============================================================ --\u003e\n\u003ch3\u003eKey Features of the DM12\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher flexural modulus vs. DM11:\u003c\/strong\u003e The model resists bending during die separation, crown seating, and finishing — eliminating the micro-distortions that cause inaccurate fits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasion-resistant cured surface:\u003c\/strong\u003e The DM12 cures to a hardness that withstands the mechanical friction of crown adjustment and trimming without developing surface wear that would compromise fit verification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow viscosity formulation:\u003c\/strong\u003e Resin drains cleanly off printed surfaces and flows back into the vat faster — reducing cleanup time, minimizing IPA consumption, and extending vat film life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYellow color for clinical accuracy:\u003c\/strong\u003e The yellow tone creates strong contrast against margin lines and adjacent contours, making it faster and easier to identify preparation boundaries, undercuts, and contact areas under lab lighting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh dimensional stability:\u003c\/strong\u003e Low shrinkage during and after curing ensures that the printed model matches your CAD geometry — critical for multi-unit cases and precise die articulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFacilitates digital transition:\u003c\/strong\u003e The DM12 is designed to make the move from traditional stone models to digital printing as straightforward as possible — fast build speeds, predictable results, and a familiar yellow color that dental technicians recognize.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     DENTAL APPLICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eDental Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeparated working models for crown and bridge restorations\u003c\/li\u003e\n\u003cli\u003eImplant analog models (Geller model configuration)\u003c\/li\u003e\n\u003cli\u003eRemovable dies for individual crown preparation\u003c\/li\u003e\n\u003cli\u003eMulti-unit implant frameworks and prosthetic reference models\u003c\/li\u003e\n\u003cli\u003eDiagnostic and study models\u003c\/li\u003e\n\u003cli\u003eThermoforming base models for aligner and retainer fabrication\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     TECHNICAL SPECIFICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSHINING 3D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDM12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Technologies\u003c\/td\u003e\n\u003ctd\u003eDLP, Monochrome LCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength\u003c\/td\u003e\n\u003ctd\u003e405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e1 kg (2.2 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eLow — facilitates fast drainage and cleanup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional Stability\u003c\/td\u003e\n\u003ctd\u003eHigh — low shrinkage formulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessing Temperature\u003c\/td\u003e\n\u003ctd\u003e20–30°C (68–86°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntraoral Use\u003c\/td\u003e\n\u003ctd\u003e❌ Not for intraoral use — lab modeling only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWash Method\u003c\/td\u003e\n\u003ctd\u003e95% Ethanol or IPA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-Cure Required\u003c\/td\u003e\n\u003ctd\u003eYes — UV curing station (FabCure 1 \/ FabCure 2 or equivalent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     PRINT SETTINGS\n     ============================================================ --\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cp\u003eThe DM12 is optimized for Shining3D's AccuFab printer series. If you are using a different 405 nm DLP or monochrome LCD printer, use these values as a starting point and fine-tune exposure times with a calibration print before running production models.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting\u003c\/th\u003e\n\u003cth\u003eRecommended Value\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength\u003c\/td\u003e\n\u003ctd\u003e405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Height\u003c\/td\u003e\n\u003ctd\u003e0.05 mm – 0.10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e20–40 s (adjust per printer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNormal Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e2–5 s (adjust per printer power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Bottom Layers\u003c\/td\u003e\n\u003ctd\u003e3–5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Speed\u003c\/td\u003e\n\u003ctd\u003eSlow — reduces suction forces on thin die walls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Orientation\u003c\/td\u003e\n\u003ctd\u003e30–45° angle — minimizes cross-sectional area per layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport Tip Diameter\u003c\/td\u003e\n\u003ctd\u003e0.4–0.6 mm recommended for dental geometry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Aliasing\u003c\/td\u003e\n\u003ctd\u003eEnabled — improves margin edge sharpness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e⚠️ For printer-specific validated profiles for the AccuFab-L4K, AccuFab-L4D, or AccuFab-CEL, refer directly to the \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/docs.shining3d.com\" target=\"_blank\"\u003eShining3D documentation portal\u003c\/a\u003e.\u003c\/p\u003e\n\u003c!-- ============================================================\n     POST-PROCESSING\n     ============================================================ --\u003e\n\u003ch3\u003ePost-Processing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove from build plate\u003c\/strong\u003e using a metal spatula. Keep gloves on — uncured resin remains on the surface immediately after printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash in 95% ethanol or IPA\u003c\/strong\u003e using an ultrasonic bath: 30 seconds + 60 seconds in two separate baths. For manual washing, agitate gently with a soft brush for 5–10 minutes. Avoid prolonged immersion, which can soften fine features.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir dry\u003c\/strong\u003e for at least 5 minutes. Use pressurized air to clear IPA from die sockets and deep margin areas before curing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-cure under UV:\u003c\/strong\u003e FabCure 1 — 10 minutes \/ FabCure 2 — 7 minutes. For third-party curing stations, 5–15 minutes at 405 nm depending on lamp power. Do not over-cure — excessive UV exposure causes discoloration and can increase brittleness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove supports and finish\u003c\/strong\u003e after full post-cure for cleaner break-off points and easier trimming.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!-- ============================================================\n     WHO IS THIS FOR\n     ============================================================ --\u003e\n\u003ch3\u003eWho Is This Resin For?\u003c\/h3\u003e\n\u003cp\u003eThe Shining3D DM12 is the right choice if:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou work in a \u003cstrong\u003edental laboratory\u003c\/strong\u003e printing working models, removable dies, or implant analogs for crown and bridge cases where fit precision is non-negotiable.\u003c\/li\u003e\n\u003cli\u003eYou are \u003cstrong\u003ecurrently using the DM11\u003c\/strong\u003e and experiencing subtle distortion during die separation or crown seating — the DM12's higher flexural modulus directly addresses that.\u003c\/li\u003e\n\u003cli\u003eYou own a \u003cstrong\u003e405 nm DLP or monochrome LCD printer\u003c\/strong\u003e — including the AccuFab series, Elegoo, Anycubic Photon Mono, Phrozen Sonic, or similar machines.\u003c\/li\u003e\n\u003cli\u003eYou need a resin that supports \u003cstrong\u003efast, high-volume production\u003c\/strong\u003e with low-viscosity cleanup and predictable, batch-consistent results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis resin is NOT the right choice if\u003c\/strong\u003e you need an intraoral-grade or biocompatible material for surgical guides, custom trays, or direct patient contact. For those cases, see our \u003ca href=\"\/collections\/dental-surgical-resin\"\u003eDental Surgical Resin\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"Dental Mates","offers":[{"title":"Default Title","offer_id":52836228923686,"sku":"sku-41415000359121","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/dm12.png?v=1773934553"},{"product_id":"implant-model-resin-in-yellow-for-dlp-and-lcd-printers","title":"Dental Implant Model Resin (Yellow) for DLP and LCD Printers","description":"\u003c!-- ============================================================\n     supplies3d.shop — Product Description\n     Product : Implant Model Resin in Yellow for DLP and LCD Printers\n     Silo    : Resinas\n     Tags    : #dental-resin · #dental-model-resin\n     Last updated: March 2026\n     ============================================================ --\u003e\n\u003ch2\u003eHigh-Precision 3D Printing Resin for DLP \u0026amp; LCD Printers\u003c\/h2\u003e\n\u003cp\u003eThis yellow dental implant model resin is engineered specifically for dental lab workflows that demand tight dimensional accuracy, smooth surface finish, and reliable part stability. Whether you are printing implant models, removable dies, or orthodontic study models, this resin delivers consistent results on both DLP and monochrome LCD 3D printers with a 385–405 nm UV light source.\u003c\/p\u003e\n\u003c!-- ============================================================\n     WARNINGS\n     ============================================================ --\u003e\n\u003ch3\u003e⚠️ Before You Print — Read This First\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for intraoral use.\u003c\/strong\u003e This resin is intended for modeling and lab purposes only. It must never be placed inside a patient's mouth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV wavelength compatibility:\u003c\/strong\u003e Optimized for printers in the 385–405 nm range (DLP and monochrome LCD). Verify your printer's light source before purchasing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePPE required:\u003c\/strong\u003e Always wear nitrile gloves and safety glasses when handling uncured resin. Work in a well-ventilated area. Uncured resin is an irritant — avoid skin contact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake before use:\u003c\/strong\u003e Mix the resin thoroughly before pouring it into the vat to ensure consistent pigment distribution and printing performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing is mandatory:\u003c\/strong\u003e Parts must be washed in IPA and UV-cured after printing to achieve final mechanical properties and a non-sticky surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Keep the bottle tightly sealed, stored in a cool, dry, and dark place away from heat sources and direct sunlight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     WHAT MAKES THIS RESIN DIFFERENT\n     ============================================================ --\u003e\n\u003ch3\u003eWhy Dental Labs Choose This Implant Model Resin\u003c\/h3\u003e\n\u003cp\u003eStandard resins often fall short in dental applications because they shrink during curing, making precision fits unreliable. This implant model resin is specifically formulated to minimize dimensional shrinkage, so the model you print matches your CAD file as closely as possible. That accuracy is what makes it suitable for implant planning, crown and bridge fitting, and orthodontic staging.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensional stability:\u003c\/strong\u003e Low shrinkage during and after curing ensures that printed models hold their geometry over time — critical for implant analog positioning and die trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-precision surface detail:\u003c\/strong\u003e Captures fine anatomical features needed for accurate dental restorations and prosthetic planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast build speed:\u003c\/strong\u003e Short exposure times per layer reduce total print time without compromising detail — important in high-volume lab environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrillable and trimmable:\u003c\/strong\u003e Cured parts can be drilled, trimmed, and post-processed without cracking — ideal for analog insertion, die separation, and model articulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood combinatorial assembly:\u003c\/strong\u003e Parts fit together predictably, supporting complex implant model assemblies with removable components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYellow color:\u003c\/strong\u003e High-contrast yellow makes it easy to photograph models for case documentation and improves visibility of detail under lab lighting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     APPLICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eDental Applications\u003c\/h3\u003e\n\u003cp\u003eThis resin is optimized for the following dental lab and clinical uses:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImplant analog models and multi-unit implant frameworks\u003c\/li\u003e\n\u003cli\u003eRemovable dies for crown and bridge restorations\u003c\/li\u003e\n\u003cli\u003eOrthodontic staging and study models\u003c\/li\u003e\n\u003cli\u003eAlveolar arch models for surgical planning\u003c\/li\u003e\n\u003cli\u003eProsthetic reference and diagnostic models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     TECHNICAL SPECIFICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Technologies\u003c\/td\u003e\n\u003ctd\u003eDLP, Monochrome LCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength Range\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional Stability\u003c\/td\u003e\n\u003ctd\u003eHigh — low shrinkage formulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntraoral Use\u003c\/td\u003e\n\u003ctd\u003e❌ Not for intraoral use — lab \/ modeling only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWash Method\u003c\/td\u003e\n\u003ctd\u003eIsopropyl Alcohol (IPA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-Cure Required\u003c\/td\u003e\n\u003ctd\u003eYes — UV curing station recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     PRINT SETTINGS\n     ============================================================ --\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ Note:\u003c\/strong\u003e Every printer behaves differently. The values below are starting-point guidelines for typical monochrome LCD and DLP printers in the 385–405 nm range. Always run a calibration print and adjust exposure times for your specific machine before running production models. \u003c!-- IMPLEMENTACIÓN: Verificar si la imagen de parámetros del producto\n       (1-1_IMPLANTING_RESIN_parameter.png) contiene settings específicos del fabricante.\n       Si es así, reemplazar esta tabla con esos valores confirmados. --\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting\u003c\/th\u003e\n\u003cth\u003eRecommended Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Height\u003c\/td\u003e\n\u003ctd\u003e0.05 mm – 0.10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNormal Exposure Time\u003c\/td\u003e\n\u003ctd\u003e2–4 seconds (adjust per printer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e20–40 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Bottom Layers\u003c\/td\u003e\n\u003ctd\u003e3–5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Speed\u003c\/td\u003e\n\u003ctd\u003eSlow — 40–60 mm\/min (normal layers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport Tip Diameter\u003c\/td\u003e\n\u003ctd\u003e0.4–0.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Aliasing\u003c\/td\u003e\n\u003ctd\u003eRecommended — improves surface smoothness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Orientation\u003c\/td\u003e\n\u003ctd\u003eAngled 30–45° to reduce suction forces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     POST-PROCESSING\n     ============================================================ --\u003e\n\u003ch3\u003ePost-Processing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove from build plate\u003c\/strong\u003e carefully using a spatula. Keep gloves on — uncured resin is still present on the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash in IPA\u003c\/strong\u003e for 5–10 minutes. Use a dedicated wash station or agitate gently with a soft-bristle brush to remove residual resin from fine detail areas. Avoid over-washing, which can affect surface quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir dry\u003c\/strong\u003e for at least 5 minutes in a well-ventilated area, or use pressurized air to remove IPA from recesses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-cure under UV light\u003c\/strong\u003e for 5–20 minutes depending on your curing station power. Post-curing fully hardens the part and eliminates surface tackiness. Do not over-cure, as excessive UV exposure can cause discoloration or brittleness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove supports\u003c\/strong\u003e and perform any trimming or drilling after post-cure for cleaner break-off points.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!-- ============================================================\n     WHO IS THIS FOR\n     ============================================================ --\u003e\n\u003ch3\u003eWho Is This Resin For?\u003c\/h3\u003e\n\u003cp\u003eThis implant model resin is the right choice if:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou work in a \u003cstrong\u003edental laboratory\u003c\/strong\u003e and need reliable, consistent 3D-printed models for implant restorations, crown and bridge work, or orthodontic planning.\u003c\/li\u003e\n\u003cli\u003eYou own a \u003cstrong\u003eDLP or monochrome LCD printer\u003c\/strong\u003e with a 385–405 nm UV light source (such as Elegoo, Anycubic, Phrozen, SprintRay, or similar).\u003c\/li\u003e\n\u003cli\u003eYou need a resin that can be \u003cstrong\u003edrilled and trimmed\u003c\/strong\u003e without breaking — for example, when inserting implant analogs or separating removable dies.\u003c\/li\u003e\n\u003cli\u003eYou want a \u003cstrong\u003efast-printing, dimensionally stable\u003c\/strong\u003e material that doesn't require complex print settings to achieve accurate results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis resin is NOT for you if\u003c\/strong\u003e you need an intraoral-grade or biocompatible material for surgical guides or mouth trays. For those applications, see our \u003ca href=\"\/collections\/dental-surgical-resin\"\u003eDental Surgical Resin\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"Dental Mates","offers":[{"title":"Default Title","offer_id":52836229153062,"sku":"sku-42544758915281","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/1-1IMPLANTINGRESIN.png?v=1773934584"}],"url":"https:\/\/supplies3d.shop\/collections\/elegoo.oembed","provider":"U.S. Printer Supplies","version":"1.0","type":"link"}