{"title":"Dental Model Resin","description":"\u003ch2\u003ePrecision Resin for Diagnostic and Working Models\u003c\/h2\u003e\n\u003cp\u003eDental model resin is specifically formulated for the production of diagnostic models, orthodontic models, crown and bridge working models, and aligner manufacturing bases. These resins prioritize dimensional accuracy, smooth surface finish, and color contrast — delivering models that technicians can work with confidently and patients can understand clearly. In a modern dental lab, 3D printed models produced with high-quality dental model resin have largely replaced traditional plaster casting for speed, consistency, and cost efficiency.\u003c\/p\u003e\n\u003cp\u003eLeading dental model resins from Formlabs, Elegoo, and Anycubic are validated for use with their respective printer ecosystems and deliver layer accuracies as fine as 25–50 microns — more than sufficient for the tolerances required in orthodontic and restorative workflows. Typical colors include tan, grey, and beige to maximize contrast for margin identification and die trimming.\u003c\/p\u003e\n\u003ch3\u003eApplications for Dental Model Resin\u003c\/h3\u003e\n\u003cp\u003eOrthodontic study models for case presentation and treatment planning, aligner manufacturing bases for thermoforming, crown and bridge working models for indirect restorations, implant planning models, and diagnostic wax-up bases are all primary applications for dental model resin. The speed advantage over traditional plaster — models ready in minutes rather than hours — makes 3D printing the preferred workflow in high-volume dental labs.\u003c\/p\u003e\n\u003ch3\u003eChoosing the Right Dental Model Resin\u003c\/h3\u003e\n\u003cp\u003eWhen selecting a dental model resin, prioritize dimensional accuracy (low shrinkage), surface smoothness (for clean margin reading), and compatibility with your printer's validated workflow. Formlabs Model Resin is the industry benchmark for validated accuracy. Elegoo and Anycubic offer cost-effective alternatives for labs looking to reduce material costs without sacrificing clinical performance.\u003c\/p\u003e\n\u003ch3\u003eExplore More Dental Resins\u003c\/h3\u003e\n\u003cp\u003eFor resins certified for direct intraoral use — surgical guides, occlusal splints, and orthodontic appliances — browse our \u003ca href=\"\/collections\/dental-surgical-resin\"\u003eDental Surgical Resin\u003c\/a\u003e collection. Or explore our full \u003ca href=\"\/collections\/dental-resin\"\u003eDental Resin\u003c\/a\u003e catalog for all clinical formulations.\u003c\/p\u003e\n\u003cp\u003e← Back to \u003ca href=\"\/collections\/dental-resin\"\u003eDental Resin\u003c\/a\u003e | \u003ca href=\"\/pages\/3d-resins\"\u003eView all 3D Resins\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"high-temperature-resistant-dental-model-resin-for-dlp-and-lcd-printers-1000ml1kg","title":"High-Temperature Resistant Dental Model Resin for DLP and LCD Printers 1000ml(1kg)","description":"\u003c!-- ============================================================\n     supplies3d.shop — Product Description\n     Product : High-Temperature Resistant Dental Model Resin for DLP and LCD Printers 1,000ml (1kg)\n     Silo    : Resinas\n     Tags    : #dental-model-resin · #dental-resin\n     Last updated: March 2026\n     ⚠️ Ver sección NOTAS DE IMPLEMENTACIÓN al final del archivo.\n     ============================================================ --\u003e\n\u003ch2\u003e3D Print Thermoforming Models for Clear Aligners \u0026amp; Orthodontic Appliances\u003c\/h2\u003e\n\u003cp\u003eIf you are making clear aligners or any thermoplastic orthodontic appliance in-house, you already know the problem with standard dental model resins: the heat press deforms the model. The thermoplastic sheet comes down at high temperature and pressure, and a standard resin model softens, warps, and transfers that distortion directly into the aligner — which then does not fit the patient correctly.\u003c\/p\u003e\n\u003cp\u003eThis high-temperature resistant dental model resin is specifically formulated to prevent that from happening. It is engineered to withstand the heat and pressure of the thermoforming process without losing its shape — so the aligner that comes off the model reflects your digital design, not a heat-distorted version of it. Everything else you expect from a dental model resin — dimensional accuracy, fine surface detail, low shrinkage — is built in. The high-temperature resistance is the additional layer that makes it the right choice for thermoforming workflows.\u003c\/p\u003e\n\u003c!-- ============================================================\n     WARNINGS\n     ============================================================ --\u003e\n\u003ch3\u003e⚠️ Before You Print — Read This First\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for intraoral use.\u003c\/strong\u003e This is a dental lab modeling resin — it is used to create the physical model over which thermoplastic appliances are formed. The resin model itself never contacts the patient's mouth. The aligner or retainer formed over it does.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV wavelength:\u003c\/strong\u003e Compatible with DLP and monochrome LCD printers in the 385–405 nm range. Confirm your printer's light source wavelength before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing is mandatory — and critical for heat resistance.\u003c\/strong\u003e The high-temperature properties of this resin are only fully activated after proper UV post-curing. An under-cured model will not achieve its rated heat resistance and will deform during thermoforming just like a standard resin. Always follow the manufacturer's post-cure protocol completely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow the model to cool fully before thermoforming.\u003c\/strong\u003e Post-curing generates heat in the model. Thermoforming over a warm model introduces dimensional variables. Let the model cool to room temperature — at least 30 minutes after curing — before placing it in the thermoforming press.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePPE required during fabrication:\u003c\/strong\u003e Wear nitrile gloves and safety glasses when handling uncured resin. Work in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake before every use:\u003c\/strong\u003e Mix thoroughly before pouring into the vat to ensure consistent pigment distribution and curing behavior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Keep sealed below 25°C (77°F), away from direct light and heat sources.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     WHY HEAT RESISTANCE MATTERS — EXPLAINED FOR A 12-YEAR-OLD\n     ============================================================ --\u003e\n\u003ch3\u003eWhy Does a Dental Model Need to Be Heat Resistant? (The Simple Version)\u003c\/h3\u003e\n\u003cp\u003eImagine you want to make a custom-fit tray for ice cubes using your hand as a mold. You press warm silicone over your hand, it sets in the exact shape of your fingers, and you have a perfect mold. That is essentially what a thermoforming machine does to make a clear aligner — except instead of warm silicone, it uses a hot thermoplastic sheet, and instead of your hand, it uses a 3D-printed model of the patient's teeth.\u003c\/p\u003e\n\u003cp\u003eHere is the problem: the machine heats that plastic sheet to around 70–120°C before pressing it over the model. If the model is made from a standard resin that softens at that temperature, it will deform slightly under the heat and pressure — and that deformation gets transferred into the aligner. The aligner then does not fit the patient correctly, and the entire orthodontic staging is compromised.\u003c\/p\u003e\n\u003cp\u003eThis high-temperature resistant resin stays rigid and dimensionally stable through the entire thermoforming cycle. The model does not soften. The aligner comes off with the exact geometry it was supposed to have. That is the entire value proposition of this product in one sentence.\u003c\/p\u003e\n\u003c!-- ============================================================\n     KEY FEATURES\n     ============================================================ --\u003e\n\u003ch3\u003eKey Material Properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh heat deflection temperature (HDT) — the defining property:\u003c\/strong\u003e This resin maintains its shape and dimensions through the thermoforming process. Where standard dental model resins begin to soften and deform under heat and pressure, this resin stays rigid — preserving the model geometry that your aligner staging depends on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh dimensional accuracy:\u003c\/strong\u003e Low shrinkage formulation that stays true to your digital model through printing and post-curing — so the tooth positions and angulations in the physical model match your treatment plan staging file.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh surface detail:\u003c\/strong\u003e Reproduces fine tooth morphology — cusps, marginal ridges, contact points, and gingival contours — with the resolution needed for accurate aligner seating and predictable tooth movement per stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy aligner release:\u003c\/strong\u003e The cured surface allows thermoformed thermoplastic sheets to release cleanly after forming — without tearing, sticking, or leaving residue on the aligner that would affect its optical clarity or fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReusable model durability:\u003c\/strong\u003e Heat-resistant models withstand multiple thermoforming cycles without degradation — useful when producing multiple aligner stages from the same model, or when reprinting a replacement appliance for a patient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1kg \/ 1,000ml format:\u003c\/strong\u003e Production volume format for orthodontic labs with high case throughput. The thermoforming workflow requires one model per stage per patient — volume matters more here than in any other dental model category.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     CLINICAL APPLICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eDental and Orthodontic Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClear aligner staging models (each stage of an aligner treatment plan)\u003c\/li\u003e\n\u003cli\u003eRetainer thermoforming models (Hawley-style and Essex\/Essix retainers)\u003c\/li\u003e\n\u003cli\u003eWhitening tray models\u003c\/li\u003e\n\u003cli\u003eNight guard thermoforming models\u003c\/li\u003e\n\u003cli\u003eOrthodontic appliance base models requiring vacuum-press or thermopress forming\u003c\/li\u003e\n\u003cli\u003eDiagnostic and study models used in heated environments\u003c\/li\u003e\n\u003cli\u003eCrown and bridge working models requiring superior dimensional stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     TECHNICAL SPECIFICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Technologies\u003c\/td\u003e\n\u003ctd\u003eDLP, Monochrome LCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength Range\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight \/ Volume\u003c\/td\u003e\n\u003ctd\u003e1,000 g \/ 1,000 ml (1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey Property\u003c\/td\u003e\n\u003ctd\u003eHigh-temperature resistant — stable under thermoforming heat and pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional Stability\u003c\/td\u003e\n\u003ctd\u003eHigh — low shrinkage through print and cure cycle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntraoral Use\u003c\/td\u003e\n\u003ctd\u003e❌ Not for intraoral use — lab modeling only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-Cure Required\u003c\/td\u003e\n\u003ctd\u003eYes — mandatory to activate full heat resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWash Method\u003c\/td\u003e\n\u003ctd\u003eIPA 95% or ethanol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessing Temperature\u003c\/td\u003e\n\u003ctd\u003e20–30°C (68–86°F) at print time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003eBelow 25°C (77°F), away from light and heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ⚠️ IMPLEMENTACIÓN: Verificar imagen de parámetros del producto en el listing\n     de Dental Mates. Si contiene el HDT específico del fabricante (°C), añadirlo\n     a la tabla arriba. Este es el dato más importante de este producto y debería\n     mostrarse prominentemente. HDT típicos en esta categoría: 120°C–190°C. --\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- ============================================================\n     PRINT SETTINGS\n     ============================================================ --\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cp\u003eHigh-temperature resins often require slightly longer exposure times than standard dental model resins to fully cure and activate their thermal resistance properties. Under-exposure is the most common cause of models that still deform during thermoforming. Always verify heat resistance by pressing a test model before committing to a full patient case series.\u003c\/p\u003e\n\u003c!-- IMPLEMENTACIÓN: Verificar imagen de parámetros del fabricante en el listing\n     de Dental Mates y reemplazar los valores orientativos de esta tabla con los\n     valores confirmados, especialmente el exposure time que es crítico para\n     activar la resistencia al calor. --\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting\u003c\/th\u003e\n\u003cth\u003eRecommended Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Height\u003c\/td\u003e\n\u003ctd\u003e0.05 mm – 0.10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNormal Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e2–6 s — high-temp resins may need slightly more than standard model resins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e25–45 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Bottom Layers\u003c\/td\u003e\n\u003ctd\u003e3–5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Speed\u003c\/td\u003e\n\u003ctd\u003eStandard to slow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Orientation\u003c\/td\u003e\n\u003ctd\u003eAngled 30–45° — reduces suction on flat model bases and improves surface quality on buccal surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport Strategy\u003c\/td\u003e\n\u003ctd\u003eLight supports on base — keep occlusal and buccal surfaces support-free for clean thermoforming contact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Aliasing\u003c\/td\u003e\n\u003ctd\u003eEnabled — improves surface smoothness for clean thermoplastic release\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     POST-PROCESSING\n     ============================================================ --\u003e\n\u003ch3\u003ePost-Processing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove from build plate\u003c\/strong\u003e carefully using a spatula.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash in IPA 95% or ethanol\u003c\/strong\u003e using an ultrasonic cleaner — two sequential cycles of 3–5 minutes each in fresh solvent. Rinse thoroughly. Residual uncured resin on the surface reduces heat resistance and creates a tacky surface that causes thermoplastic adhesion during forming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir dry completely\u003c\/strong\u003e using pressurized air. Ensure recesses between teeth are fully dry before post-curing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-cure under UV — full cure is mandatory for heat resistance.\u003c\/strong\u003e Use a rotating turntable curing station. Follow the manufacturer's validated time. This step activates the cross-linking that gives the resin its high-temperature stability. An under-cured model will fail in the thermoforming press.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow to cool fully to room temperature\u003c\/strong\u003e — minimum 30 minutes — before thermoforming. Post-curing generates internal heat in the model; thermoforming over a warm model introduces dimensional errors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify on a test press\u003c\/strong\u003e before running a patient case. Press a scrap sheet of your thermoplastic over the model at your standard settings — confirm that the model shows zero deformation and the sheet releases cleanly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!-- ============================================================\n     WHO IS THIS FOR\n     ============================================================ --\u003e\n\u003ch3\u003eWho Is This Resin For?\u003c\/h3\u003e\n\u003cp\u003eThis high-temperature resistant dental model resin is the right choice if:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou are an \u003cstrong\u003eorthodontist, orthodontic lab technician, or digital dentistry clinic\u003c\/strong\u003e producing clear aligner staging models in-house — where every model in the treatment sequence needs to survive the thermoforming press with zero dimensional change.\u003c\/li\u003e\n\u003cli\u003eYou have experienced \u003cstrong\u003emodel deformation during thermoforming\u003c\/strong\u003e with your current dental model resin — this is the direct solution to that problem. A resin with higher HDT eliminates the root cause of deformed aligners.\u003c\/li\u003e\n\u003cli\u003eYou produce \u003cstrong\u003ehigh case volumes\u003c\/strong\u003e of clear aligners or retainers and need a reliable, consistent 1kg production format that performs identically across batches — reducing reprints and remakes caused by material variability.\u003c\/li\u003e\n\u003cli\u003eYou own a \u003cstrong\u003e385–405 nm DLP or monochrome LCD printer\u003c\/strong\u003e and a UV curing station, and use a standard thermoforming press (vacuum or pressure) for PETG, TPU, or similar thermoplastic aligner materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis resin is NOT the right choice if\u003c\/strong\u003e you do not use thermoforming in your workflow and only need a standard dental model for crown and bridge fitting, implant models, or diagnostic use. For those applications, our \u003ca href=\"\/collections\/dental-model-resin\"\u003eDental Model Resin\u003c\/a\u003e collection offers the same accuracy at a more accessible price point.\u003c\/p\u003e","brand":"Dental Mates","offers":[{"title":"Default Title","offer_id":52836226007334,"sku":"sku-42676493648081","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/1HIGHTEMRRESISTENTRESIN.png?v=1773934334"},{"product_id":"dental-model-resin-for-dlp-and-lcd-printers-1-000ml1kg-water-washable","title":"Water Washable Dental Model Resin for DLP \u0026 LCD Printers — No IPA Needed, High Precision Dental Models (1kg \/ 1,000ml)","description":"\u003c!-- ============================================================\n     supplies3d.shop — Product Description\n     Product : Dental Model Resin for DLP and LCD Printers 1,000ml (1kg) Water Washable\n     Silo    : Resinas\n     Tags    : #dental-model-resin · #water-washable-resin\n     Last updated: March 2026\n     ⚠️ Ver sección NOTAS DE IMPLEMENTACIÓN al final del archivo.\n     ============================================================ --\u003e\n\u003ch2\u003eDental Model Resin for DLP \u0026amp; LCD Printer\u003c\/h2\u003e\n\u003cp\u003eThis water washable dental model resin is designed for dental labs and clinics that print crown and bridge models, implant analog models, and diagnostic study models on DLP or monochrome LCD printers — and want a cleaner, cheaper, and faster post-processing workflow. The key difference from a standard dental model resin? You wash the printed model under running water instead of soaking it in isopropyl alcohol. That one change saves money on IPA, removes the fire and ventilation hazard of storing alcohol in your workspace, and cuts post-processing time significantly.\u003c\/p\u003e\n\u003cp\u003eThe model resin side of the equation is equally solid: low shrinkage formulation, high dimensional accuracy, and the stiffness needed for precise die trimming and crown fitting. Everything a dental model resin needs to do — just without the IPA bottle.\u003c\/p\u003e\n\u003c!-- ============================================================\n     WARNINGS\n     ============================================================ --\u003e\n\u003ch3\u003e⚠️ Before You Print — Read This First\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for intraoral use.\u003c\/strong\u003e This is a dental lab modeling resin. It is used to create physical working models — it must never be placed inside a patient's mouth. Models printed with this resin are reference tools, not restorations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV wavelength:\u003c\/strong\u003e Compatible with DLP and monochrome LCD printers in the 385–405 nm range. Verify your printer's light source before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater washable ≠ safe to touch uncured.\u003c\/strong\u003e This resin washes with water after printing, but uncured liquid resin is still a skin and eye irritant. Always wear nitrile gloves and safety glasses when handling uncured resin, during printing, and during the wash step.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing is required.\u003c\/strong\u003e Water washing removes the uncured resin from the surface, but the model still needs UV post-curing to reach final hardness and dimensional stability. Do not skip this step.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not over-wash.\u003c\/strong\u003e Leaving the model submerged in water for more than the recommended time can affect surface quality and dimensional accuracy. Short, efficient wash cycles give the best results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake before use:\u003c\/strong\u003e Mix thoroughly before pouring into the vat. Settled components cause uneven curing and color inconsistency across the build plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Keep sealed below 25°C (77°F), away from direct light and heat. Do not store in direct sunlight — ambient UV will begin curing the resin in the bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     WATER WASHABLE VS. IPA — EXPLAINED SIMPLY\n     ============================================================ --\u003e\n\u003ch3\u003eWater Washable vs. Standard Dental Resin — What Actually Changes in Your Workflow\u003c\/h3\u003e\n\u003cp\u003eThink of it this way: after you print a model, it comes out of the printer with a thin layer of liquid resin still coating the surface. With a standard dental resin, you need to remove that liquid by soaking the model in IPA (isopropyl alcohol) — which you then have to store safely, dispose of properly, and constantly restock. With this water washable resin, you rinse that same liquid off under the tap or in a bowl of water. Same result, none of the hassle.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eStep\u003c\/th\u003e\n\u003cth\u003eStandard Dental Resin\u003c\/th\u003e\n\u003cth\u003eThis Water Washable Resin\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-print wash\u003c\/td\u003e\n\u003ctd\u003eIPA or 95% ethanol — flammable, ventilation required\u003c\/td\u003e\n\u003ctd\u003eTap water or ultrasonic with water — no alcohol needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConsumable cost\u003c\/td\u003e\n\u003ctd\u003eOngoing IPA purchase and disposal\u003c\/td\u003e\n\u003ctd\u003eWater — near zero additional cost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorkspace safety\u003c\/td\u003e\n\u003ctd\u003eFlammable solvent storage required\u003c\/td\u003e\n\u003ctd\u003eNo flammables — safer for chairside and small office use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOdor during wash\u003c\/td\u003e\n\u003ctd\u003eStrong IPA fumes during cleaning\u003c\/td\u003e\n\u003ctd\u003eLow odor — more comfortable in open environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-cure required\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes — same as standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel accuracy\u003c\/td\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003ctd\u003eHigh — low shrinkage formulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     KEY FEATURES\n     ============================================================ --\u003e\n\u003ch3\u003eKey Material Properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater washable — no IPA or alcohol required:\u003c\/strong\u003e The most practical advantage for busy labs and chairside workflows. Eliminate flammable solvent storage, reduce consumable costs, and speed up the post-processing step without sacrificing model quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow shrinkage — models stay accurate after curing:\u003c\/strong\u003e The resin is formulated to minimize dimensional change during the UV post-cure step. This is critical for models that will be used to seat crowns, check margin fits, or hold implant analogs — any dimensional shift translates directly into a worse-fitting restoration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh surface detail reproduction:\u003c\/strong\u003e Captures fine anatomical features — margin lines, die contours, interproximal contacts — needed for accurate crown and bridge fabrication and diagnostic evaluation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow viscosity:\u003c\/strong\u003e The resin drains off printed surfaces cleanly, which means less residual resin to wash off, a cleaner vat after printing, and less material wasted per build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow odor:\u003c\/strong\u003e More comfortable to work with in enclosed environments — a meaningful quality-of-life improvement for chairside use or small office setups without dedicated ventilation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1kg \/ 1,000ml format:\u003c\/strong\u003e Full production volume for high-throughput labs. Cost-effective per model at scale without the compromise of smaller trial sizes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     APPLICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eDental Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCrown and bridge working models with removable dies\u003c\/li\u003e\n\u003cli\u003eImplant analog models and multi-unit implant frameworks\u003c\/li\u003e\n\u003cli\u003eDiagnostic and study models\u003c\/li\u003e\n\u003cli\u003eOrthodontic staging and aligner base models\u003c\/li\u003e\n\u003cli\u003eAlveolar arch models for treatment planning\u003c\/li\u003e\n\u003cli\u003ePatient communication models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     TECHNICAL SPECIFICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Technologies\u003c\/td\u003e\n\u003ctd\u003eDLP, Monochrome LCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength Range\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight \/ Volume\u003c\/td\u003e\n\u003ctd\u003e1,000 g \/ 1,000 ml (1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWash Method\u003c\/td\u003e\n\u003ctd\u003eWater — no IPA or alcohol required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional Stability\u003c\/td\u003e\n\u003ctd\u003eHigh — low shrinkage formulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eLow — facilitates clean drainage and easy handling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntraoral Use\u003c\/td\u003e\n\u003ctd\u003e❌ Not for intraoral use — lab modeling only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-Cure Required\u003c\/td\u003e\n\u003ctd\u003eYes — UV curing station recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessing Temperature\u003c\/td\u003e\n\u003ctd\u003e20–30°C (68–86°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003eBelow 25°C (77°F), away from light and heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     PRINT SETTINGS\n     ============================================================ --\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cp\u003eWater washable dental resins can behave slightly differently from IPA-wash resins on the same printer — the exposure time that works for your standard dental resin may need minor adjustment here. Run a calibration print first and verify dimensional accuracy on a reference model before committing to a full production build.\u003c\/p\u003e\n\u003c!-- IMPLEMENTACIÓN: Verificar imagen de parámetros del fabricante en el listing de\n     Dental Mates. Si contiene print settings específicos, reemplazar los valores\n     orientativos de esta tabla con los valores confirmados. --\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting\u003c\/th\u003e\n\u003cth\u003eRecommended Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Height\u003c\/td\u003e\n\u003ctd\u003e0.05 mm – 0.10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNormal Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e2–5 s (adjust per printer power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e20–40 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Bottom Layers\u003c\/td\u003e\n\u003ctd\u003e3–5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Speed\u003c\/td\u003e\n\u003ctd\u003eStandard to slow — reduces layer separation risk on fine die walls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Orientation\u003c\/td\u003e\n\u003ctd\u003eAngled 30–45° — reduces suction forces on flat model bases\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport Tip Diameter\u003c\/td\u003e\n\u003ctd\u003e0.4–0.6 mm — light supports preserve surface finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Aliasing\u003c\/td\u003e\n\u003ctd\u003eEnabled — improves sharpness of margin lines and die contours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     POST-PROCESSING\n     ============================================================ --\u003e\n\u003ch3\u003ePost-Processing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove from build plate\u003c\/strong\u003e carefully using a metal spatula. Keep gloves on — uncured resin is still present on the surface at this stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse under water\u003c\/strong\u003e immediately after removal. Use a soft brush or a dedicated ultrasonic cleaner filled with water to dislodge resin from fine detail areas — die sockets, margin lines, and interproximal spaces. Two short rinse cycles in fresh water are more effective than one long soak.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e⚠️ Do not over-soak.\u003c\/strong\u003e Prolonged water exposure can cause water absorption in the partially cured resin, leading to surface softening or dimensional changes. Keep total water contact time under the manufacturer's recommendation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir dry completely\u003c\/strong\u003e before post-curing. Use pressurized air to clear water from sockets, die holes, and recessed areas. Surface moisture during UV curing can create a hazy finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-cure under UV\u003c\/strong\u003e for the manufacturer's recommended time. This step hardens the model to its final mechanical properties and dimensional stability — do not skip it even though the surface already feels dry and solid after washing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim, articulate, and verify\u003c\/strong\u003e on the articulator before use in crown fabrication or patient communication.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!-- ============================================================\n     WHO IS THIS FOR\n     ============================================================ --\u003e\n\u003ch3\u003eWho Is This Resin For?\u003c\/h3\u003e\n\u003cp\u003eThis water washable dental model resin is the right choice if:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou are a \u003cstrong\u003edental lab or in-office clinician\u003c\/strong\u003e printing working models, implant analogs, or diagnostic models and want to eliminate IPA from your post-processing workflow entirely.\u003c\/li\u003e\n\u003cli\u003eYou work in a \u003cstrong\u003esmall office or chairside environment\u003c\/strong\u003e without dedicated solvent ventilation — water washable resins remove the fire hazard and odor of IPA-based cleaning.\u003c\/li\u003e\n\u003cli\u003eYou are looking to \u003cstrong\u003ereduce consumable costs\u003c\/strong\u003e — removing ongoing IPA purchasing and disposal from your workflow is a real operational saving at production scale.\u003c\/li\u003e\n\u003cli\u003eYou own a \u003cstrong\u003e385–405 nm DLP or monochrome LCD printer\u003c\/strong\u003e and already have a UV curing station — the only additional hardware you need is a water wash basin or a standard ultrasonic cleaner filled with water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis resin is NOT the right choice if\u003c\/strong\u003e you need a flexible or elastic material, or if you require a material validated for intraoral patient use. For dental surgical applications, see our \u003ca href=\"\/collections\/dental-surgical-resin\"\u003eDental Surgical Resin\u003c\/a\u003e collection. For standard dental model resins without the water washable formula, see our \u003ca href=\"\/collections\/dental-model-resin\"\u003eDental Model Resin\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"Dental Mates","offers":[{"title":"Default Title","offer_id":52836227023142,"sku":"sku-42676492468433","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/1WATERWASHABLEORTHORESIN.png?v=1773934432"},{"product_id":"shining3d-dm12-implant-model","title":"Shining3D DM12 Dental Model Resin","description":"\u003c!-- ============================================================\n     supplies3d.shop — Product Description\n     Product : Shining3D DM12 Dental Implant Model Resin (Yellow)\n     Brand   : SHINING 3D\n     Silo    : Resinas\n     Tags    : #dental-resin · #dental-model-resin\n     Last updated: March 2026\n     ============================================================ --\u003e\n\u003ch2\u003eHigh-Precision 3D Printing Resin for Crown \u0026amp; Bridge Models\u003c\/h2\u003e\n\u003cp\u003eThe Shining3D DM12 is a professional photopolymer resin designed from the ground up for dental laboratory workflows. It is the direct evolution of the DM11, re-engineered with a higher flexural modulus and lower elasticity to solve the one problem that matters most in crown and bridge work: model distortion. When a model flexes during die separation or crown seating, the fit suffers. The DM12 eliminates that variable — delivering stable, accurate, abrasion-resistant models that hold their geometry through every step of the finishing process.\u003c\/p\u003e\n\u003c!-- ============================================================\n     WARNINGS\n     ============================================================ --\u003e\n\u003ch3\u003e⚠️ Before You Print — Read This First\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for intraoral use.\u003c\/strong\u003e The DM12 is a dental lab modeling resin only. It must never be placed inside a patient's mouth. For biocompatible or surgical applications, see our \u003ca href=\"\/collections\/dental-surgical-resin\"\u003eDental Surgical Resin\u003c\/a\u003e collection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e405 nm UV light required.\u003c\/strong\u003e The DM12 is formulated for 405 nm DLP and LCD printers. Verify your printer's light source wavelength before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint at room temperature:\u003c\/strong\u003e Work in an environment between 20–30°C (68–86°F). Cold resin thickens, causing drainage issues, adhesion failures, and inconsistent layer exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePPE is non-negotiable:\u003c\/strong\u003e Always wear nitrile gloves and safety glasses when handling uncured resin. Uncured photopolymer is a skin and eye irritant. Work in a ventilated area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix before every session:\u003c\/strong\u003e Pigment and photoinitiators settle over time. Shake and stir thoroughly before pouring into the vat to ensure uniform color, reactivity, and print quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing is required:\u003c\/strong\u003e Parts must be washed and UV-cured after printing to achieve their final hardness and stability. An uncured model will remain soft, sticky, and dimensionally unreliable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     DM12 vs DM11 — THE UPGRADE EXPLAINED\n     ============================================================ --\u003e\n\u003ch3\u003eDM12 vs. DM11 — What Changed and Why It Matters for Your Workflow\u003c\/h3\u003e\n\u003cp\u003eIf you have used the DM11 before, here is the practical difference: the DM11 had slightly more flexibility, which is useful for some applications but can introduce subtle warping when you are seating a crown or separating a die under pressure. Think of flexural modulus as the material's resistance to bending — the higher it is, the stiffer and more stable the model stays during mechanical stress. The DM12 raises that stiffness while retaining just enough controlled elasticity so it doesn't become brittle.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDM11\u003c\/th\u003e\n\u003cth\u003eDM12\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural Modulus\u003c\/td\u003e\n\u003ctd\u003eLower\u003c\/td\u003e\n\u003ctd\u003eHigher — less bend under pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElasticity\u003c\/td\u003e\n\u003ctd\u003eHigher\u003c\/td\u003e\n\u003ctd\u003eLower — less spring-back during seating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbrasion Resistance\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eImproved — handles seating \u0026amp; finishing without surface degradation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eLow — faster drainage, easier cleanup, less resin waste\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eVaries\u003c\/td\u003e\n\u003ctd\u003eYellow — maximum margin line contrast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     KEY FEATURES\n     ============================================================ --\u003e\n\u003ch3\u003eKey Features of the DM12\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher flexural modulus vs. DM11:\u003c\/strong\u003e The model resists bending during die separation, crown seating, and finishing — eliminating the micro-distortions that cause inaccurate fits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasion-resistant cured surface:\u003c\/strong\u003e The DM12 cures to a hardness that withstands the mechanical friction of crown adjustment and trimming without developing surface wear that would compromise fit verification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow viscosity formulation:\u003c\/strong\u003e Resin drains cleanly off printed surfaces and flows back into the vat faster — reducing cleanup time, minimizing IPA consumption, and extending vat film life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYellow color for clinical accuracy:\u003c\/strong\u003e The yellow tone creates strong contrast against margin lines and adjacent contours, making it faster and easier to identify preparation boundaries, undercuts, and contact areas under lab lighting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh dimensional stability:\u003c\/strong\u003e Low shrinkage during and after curing ensures that the printed model matches your CAD geometry — critical for multi-unit cases and precise die articulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFacilitates digital transition:\u003c\/strong\u003e The DM12 is designed to make the move from traditional stone models to digital printing as straightforward as possible — fast build speeds, predictable results, and a familiar yellow color that dental technicians recognize.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     DENTAL APPLICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eDental Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeparated working models for crown and bridge restorations\u003c\/li\u003e\n\u003cli\u003eImplant analog models (Geller model configuration)\u003c\/li\u003e\n\u003cli\u003eRemovable dies for individual crown preparation\u003c\/li\u003e\n\u003cli\u003eMulti-unit implant frameworks and prosthetic reference models\u003c\/li\u003e\n\u003cli\u003eDiagnostic and study models\u003c\/li\u003e\n\u003cli\u003eThermoforming base models for aligner and retainer fabrication\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     TECHNICAL SPECIFICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSHINING 3D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDM12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Technologies\u003c\/td\u003e\n\u003ctd\u003eDLP, Monochrome LCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength\u003c\/td\u003e\n\u003ctd\u003e405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e1 kg (2.2 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003eLow — facilitates fast drainage and cleanup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional Stability\u003c\/td\u003e\n\u003ctd\u003eHigh — low shrinkage formulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessing Temperature\u003c\/td\u003e\n\u003ctd\u003e20–30°C (68–86°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntraoral Use\u003c\/td\u003e\n\u003ctd\u003e❌ Not for intraoral use — lab modeling only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWash Method\u003c\/td\u003e\n\u003ctd\u003e95% Ethanol or IPA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-Cure Required\u003c\/td\u003e\n\u003ctd\u003eYes — UV curing station (FabCure 1 \/ FabCure 2 or equivalent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     PRINT SETTINGS\n     ============================================================ --\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cp\u003eThe DM12 is optimized for Shining3D's AccuFab printer series. If you are using a different 405 nm DLP or monochrome LCD printer, use these values as a starting point and fine-tune exposure times with a calibration print before running production models.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting\u003c\/th\u003e\n\u003cth\u003eRecommended Value\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength\u003c\/td\u003e\n\u003ctd\u003e405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Height\u003c\/td\u003e\n\u003ctd\u003e0.05 mm – 0.10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e20–40 s (adjust per printer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNormal Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e2–5 s (adjust per printer power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Bottom Layers\u003c\/td\u003e\n\u003ctd\u003e3–5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Speed\u003c\/td\u003e\n\u003ctd\u003eSlow — reduces suction forces on thin die walls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Orientation\u003c\/td\u003e\n\u003ctd\u003e30–45° angle — minimizes cross-sectional area per layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport Tip Diameter\u003c\/td\u003e\n\u003ctd\u003e0.4–0.6 mm recommended for dental geometry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Aliasing\u003c\/td\u003e\n\u003ctd\u003eEnabled — improves margin edge sharpness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e⚠️ For printer-specific validated profiles for the AccuFab-L4K, AccuFab-L4D, or AccuFab-CEL, refer directly to the \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/docs.shining3d.com\" target=\"_blank\"\u003eShining3D documentation portal\u003c\/a\u003e.\u003c\/p\u003e\n\u003c!-- ============================================================\n     POST-PROCESSING\n     ============================================================ --\u003e\n\u003ch3\u003ePost-Processing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove from build plate\u003c\/strong\u003e using a metal spatula. Keep gloves on — uncured resin remains on the surface immediately after printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash in 95% ethanol or IPA\u003c\/strong\u003e using an ultrasonic bath: 30 seconds + 60 seconds in two separate baths. For manual washing, agitate gently with a soft brush for 5–10 minutes. Avoid prolonged immersion, which can soften fine features.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir dry\u003c\/strong\u003e for at least 5 minutes. Use pressurized air to clear IPA from die sockets and deep margin areas before curing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-cure under UV:\u003c\/strong\u003e FabCure 1 — 10 minutes \/ FabCure 2 — 7 minutes. For third-party curing stations, 5–15 minutes at 405 nm depending on lamp power. Do not over-cure — excessive UV exposure causes discoloration and can increase brittleness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove supports and finish\u003c\/strong\u003e after full post-cure for cleaner break-off points and easier trimming.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!-- ============================================================\n     WHO IS THIS FOR\n     ============================================================ --\u003e\n\u003ch3\u003eWho Is This Resin For?\u003c\/h3\u003e\n\u003cp\u003eThe Shining3D DM12 is the right choice if:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou work in a \u003cstrong\u003edental laboratory\u003c\/strong\u003e printing working models, removable dies, or implant analogs for crown and bridge cases where fit precision is non-negotiable.\u003c\/li\u003e\n\u003cli\u003eYou are \u003cstrong\u003ecurrently using the DM11\u003c\/strong\u003e and experiencing subtle distortion during die separation or crown seating — the DM12's higher flexural modulus directly addresses that.\u003c\/li\u003e\n\u003cli\u003eYou own a \u003cstrong\u003e405 nm DLP or monochrome LCD printer\u003c\/strong\u003e — including the AccuFab series, Elegoo, Anycubic Photon Mono, Phrozen Sonic, or similar machines.\u003c\/li\u003e\n\u003cli\u003eYou need a resin that supports \u003cstrong\u003efast, high-volume production\u003c\/strong\u003e with low-viscosity cleanup and predictable, batch-consistent results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis resin is NOT the right choice if\u003c\/strong\u003e you need an intraoral-grade or biocompatible material for surgical guides, custom trays, or direct patient contact. For those cases, see our \u003ca href=\"\/collections\/dental-surgical-resin\"\u003eDental Surgical Resin\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"Dental Mates","offers":[{"title":"Default Title","offer_id":52836228923686,"sku":"sku-41415000359121","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/dm12.png?v=1773934553"},{"product_id":"implant-model-resin-in-yellow-for-dlp-and-lcd-printers","title":"Dental Implant Model Resin (Yellow) for DLP and LCD Printers","description":"\u003c!-- ============================================================\n     supplies3d.shop — Product Description\n     Product : Implant Model Resin in Yellow for DLP and LCD Printers\n     Silo    : Resinas\n     Tags    : #dental-resin · #dental-model-resin\n     Last updated: March 2026\n     ============================================================ --\u003e\n\u003ch2\u003eHigh-Precision 3D Printing Resin for DLP \u0026amp; LCD Printers\u003c\/h2\u003e\n\u003cp\u003eThis yellow dental implant model resin is engineered specifically for dental lab workflows that demand tight dimensional accuracy, smooth surface finish, and reliable part stability. Whether you are printing implant models, removable dies, or orthodontic study models, this resin delivers consistent results on both DLP and monochrome LCD 3D printers with a 385–405 nm UV light source.\u003c\/p\u003e\n\u003c!-- ============================================================\n     WARNINGS\n     ============================================================ --\u003e\n\u003ch3\u003e⚠️ Before You Print — Read This First\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for intraoral use.\u003c\/strong\u003e This resin is intended for modeling and lab purposes only. It must never be placed inside a patient's mouth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV wavelength compatibility:\u003c\/strong\u003e Optimized for printers in the 385–405 nm range (DLP and monochrome LCD). Verify your printer's light source before purchasing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePPE required:\u003c\/strong\u003e Always wear nitrile gloves and safety glasses when handling uncured resin. Work in a well-ventilated area. Uncured resin is an irritant — avoid skin contact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake before use:\u003c\/strong\u003e Mix the resin thoroughly before pouring it into the vat to ensure consistent pigment distribution and printing performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-curing is mandatory:\u003c\/strong\u003e Parts must be washed in IPA and UV-cured after printing to achieve final mechanical properties and a non-sticky surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Keep the bottle tightly sealed, stored in a cool, dry, and dark place away from heat sources and direct sunlight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     WHAT MAKES THIS RESIN DIFFERENT\n     ============================================================ --\u003e\n\u003ch3\u003eWhy Dental Labs Choose This Implant Model Resin\u003c\/h3\u003e\n\u003cp\u003eStandard resins often fall short in dental applications because they shrink during curing, making precision fits unreliable. This implant model resin is specifically formulated to minimize dimensional shrinkage, so the model you print matches your CAD file as closely as possible. That accuracy is what makes it suitable for implant planning, crown and bridge fitting, and orthodontic staging.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensional stability:\u003c\/strong\u003e Low shrinkage during and after curing ensures that printed models hold their geometry over time — critical for implant analog positioning and die trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-precision surface detail:\u003c\/strong\u003e Captures fine anatomical features needed for accurate dental restorations and prosthetic planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast build speed:\u003c\/strong\u003e Short exposure times per layer reduce total print time without compromising detail — important in high-volume lab environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrillable and trimmable:\u003c\/strong\u003e Cured parts can be drilled, trimmed, and post-processed without cracking — ideal for analog insertion, die separation, and model articulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood combinatorial assembly:\u003c\/strong\u003e Parts fit together predictably, supporting complex implant model assemblies with removable components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYellow color:\u003c\/strong\u003e High-contrast yellow makes it easy to photograph models for case documentation and improves visibility of detail under lab lighting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     APPLICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eDental Applications\u003c\/h3\u003e\n\u003cp\u003eThis resin is optimized for the following dental lab and clinical uses:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImplant analog models and multi-unit implant frameworks\u003c\/li\u003e\n\u003cli\u003eRemovable dies for crown and bridge restorations\u003c\/li\u003e\n\u003cli\u003eOrthodontic staging and study models\u003c\/li\u003e\n\u003cli\u003eAlveolar arch models for surgical planning\u003c\/li\u003e\n\u003cli\u003eProsthetic reference and diagnostic models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ============================================================\n     TECHNICAL SPECIFICATIONS\n     ============================================================ --\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Technologies\u003c\/td\u003e\n\u003ctd\u003eDLP, Monochrome LCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Wavelength Range\u003c\/td\u003e\n\u003ctd\u003e385–405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensional Stability\u003c\/td\u003e\n\u003ctd\u003eHigh — low shrinkage formulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntraoral Use\u003c\/td\u003e\n\u003ctd\u003e❌ Not for intraoral use — lab \/ modeling only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWash Method\u003c\/td\u003e\n\u003ctd\u003eIsopropyl Alcohol (IPA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePost-Cure Required\u003c\/td\u003e\n\u003ctd\u003eYes — UV curing station recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     PRINT SETTINGS\n     ============================================================ --\u003e\n\u003ch3\u003eRecommended Print Settings\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ Note:\u003c\/strong\u003e Every printer behaves differently. The values below are starting-point guidelines for typical monochrome LCD and DLP printers in the 385–405 nm range. Always run a calibration print and adjust exposure times for your specific machine before running production models. \u003c!-- IMPLEMENTACIÓN: Verificar si la imagen de parámetros del producto\n       (1-1_IMPLANTING_RESIN_parameter.png) contiene settings específicos del fabricante.\n       Si es así, reemplazar esta tabla con esos valores confirmados. --\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting\u003c\/th\u003e\n\u003cth\u003eRecommended Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Height\u003c\/td\u003e\n\u003ctd\u003e0.05 mm – 0.10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNormal Exposure Time\u003c\/td\u003e\n\u003ctd\u003e2–4 seconds (adjust per printer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom Layer Exposure\u003c\/td\u003e\n\u003ctd\u003e20–40 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Bottom Layers\u003c\/td\u003e\n\u003ctd\u003e3–5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Speed\u003c\/td\u003e\n\u003ctd\u003eSlow — 40–60 mm\/min (normal layers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport Tip Diameter\u003c\/td\u003e\n\u003ctd\u003e0.4–0.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnti-Aliasing\u003c\/td\u003e\n\u003ctd\u003eRecommended — improves surface smoothness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Orientation\u003c\/td\u003e\n\u003ctd\u003eAngled 30–45° to reduce suction forces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- ============================================================\n     POST-PROCESSING\n     ============================================================ --\u003e\n\u003ch3\u003ePost-Processing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove from build plate\u003c\/strong\u003e carefully using a spatula. Keep gloves on — uncured resin is still present on the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash in IPA\u003c\/strong\u003e for 5–10 minutes. Use a dedicated wash station or agitate gently with a soft-bristle brush to remove residual resin from fine detail areas. Avoid over-washing, which can affect surface quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir dry\u003c\/strong\u003e for at least 5 minutes in a well-ventilated area, or use pressurized air to remove IPA from recesses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-cure under UV light\u003c\/strong\u003e for 5–20 minutes depending on your curing station power. Post-curing fully hardens the part and eliminates surface tackiness. Do not over-cure, as excessive UV exposure can cause discoloration or brittleness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove supports\u003c\/strong\u003e and perform any trimming or drilling after post-cure for cleaner break-off points.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!-- ============================================================\n     WHO IS THIS FOR\n     ============================================================ --\u003e\n\u003ch3\u003eWho Is This Resin For?\u003c\/h3\u003e\n\u003cp\u003eThis implant model resin is the right choice if:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou work in a \u003cstrong\u003edental laboratory\u003c\/strong\u003e and need reliable, consistent 3D-printed models for implant restorations, crown and bridge work, or orthodontic planning.\u003c\/li\u003e\n\u003cli\u003eYou own a \u003cstrong\u003eDLP or monochrome LCD printer\u003c\/strong\u003e with a 385–405 nm UV light source (such as Elegoo, Anycubic, Phrozen, SprintRay, or similar).\u003c\/li\u003e\n\u003cli\u003eYou need a resin that can be \u003cstrong\u003edrilled and trimmed\u003c\/strong\u003e without breaking — for example, when inserting implant analogs or separating removable dies.\u003c\/li\u003e\n\u003cli\u003eYou want a \u003cstrong\u003efast-printing, dimensionally stable\u003c\/strong\u003e material that doesn't require complex print settings to achieve accurate results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis resin is NOT for you if\u003c\/strong\u003e you need an intraoral-grade or biocompatible material for surgical guides or mouth trays. For those applications, see our \u003ca href=\"\/collections\/dental-surgical-resin\"\u003eDental Surgical Resin\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"Dental Mates","offers":[{"title":"Default Title","offer_id":52836229153062,"sku":"sku-42544758915281","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/1-1IMPLANTINGRESIN.png?v=1773934584"}],"url":"https:\/\/supplies3d.shop\/collections\/dental-model-resin.oembed","provider":"SUPPLIES3D","version":"1.0","type":"link"}