{"title":"3D Printer Nozzles","description":"\u003ch2\u003eThe Most Replaced Part on Any FDM Printer\u003c\/h2\u003e\n\u003cp\u003eThe nozzle is the last point of contact between your printer and your print. At 0.4mm wide, it determines layer resolution, flow rate, and material compatibility all at once. It is also the single most frequently replaced part on any FDM printer — and for good reason. A worn nozzle causes clogs, inconsistent extrusion, stringing, and dimensional inaccuracy that no amount of slicer tuning can fully correct.\u003c\/p\u003e\n\u003ch3\u003eWhich Nozzle Material Do You Need?\u003c\/h3\u003e\n\u003cp\u003eBrass nozzles are the standard for PLA, PETG, Silk, and TPU — excellent thermal conductivity and low cost make them the right choice for non-abrasive filaments. Hardened steel nozzles are required for carbon fiber, glow-in-the-dark, wood-fill, and any filament with abrasive particles — brass wears out within hours under these materials. Ruby-tipped nozzles offer the best of both worlds: brass thermal conductivity with a ruby insert that resists abrasion indefinitely, ideal for high-use abrasive printing.\u003c\/p\u003e\n\u003ch3\u003eChoosing the Right Nozzle Size\u003c\/h3\u003e\n\u003cp\u003e0.4mm is the universal standard — the best balance of detail and speed for most prints. Go smaller (0.2mm–0.3mm) for fine detail work and miniatures. Go larger (0.6mm–1.0mm) for structural parts, fast drafts, and large prints where layer lines don't matter. A 0.6mm nozzle at the same speed as a 0.4mm deposits 125% more material per pass.\u003c\/p\u003e\n\u003ch3\u003eHow Often Should You Replace Your Nozzle?\u003c\/h3\u003e\n\u003cp\u003eWith PLA and non-abrasive filaments, a brass nozzle typically lasts 3–6 months of regular printing. With abrasive materials, an unprotected brass nozzle can wear noticeably within a single 500g spool. Keep a set of spares — they are inexpensive and a fresh nozzle often resolves print quality issues instantly.\u003c\/p\u003e\n\u003ch3\u003eRelated Parts\u003c\/h3\u003e\n\u003cp\u003eNozzles thread into your \u003ca href=\"\/collections\/3d-printer-hotends\"\u003ehotend\u003c\/a\u003e — make sure the thread pattern matches (M6 for E3D V6\/MK8, M7 for Volcano). For the extruder feeding filament to your nozzle, see \u003ca href=\"\/collections\/3d-printer-extruders\"\u003eextruders\u003c\/a\u003e. Back to the full \u003ca href=\"\/pages\/3d-printer-parts\"\u003e3D Printer Parts \u0026amp; Accessories guide\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"plated-copper-v6-nozzles-4mm-6mm-8mm-e3d-trianglelab","title":"Plated Copper V6 Nozzles (.4mm, .6mm, .8mm) - E3D TriangleLab","description":"\u003cp\u003eHigh-temperature 3D printing enthusiasts and E3D V6 hotend users often face issues with nozzle wear and filament sticking, which can degrade print quality and cause clogs. Without a reliable nozzle, prints risk under-extrusion and inconsistent layers, especially when pushing temperatures above standard limits.\u003c\/p\u003e\u003cp\u003eThe Plated Copper V6 Nozzles by TriangleLab offer a premium upgrade for E3D V6 hotends, delivering superior thermal conductivity and a non-stick nickel plating that reduces filament adhesion. Available in .4mm, .6mm, and .8mm sizes, these nozzles support high-temperature printing up to 500°C, making them ideal for demanding materials like ABS, Nylon, and Polycarbonate. Popular among Prusa MK4 users and CoreXY builders who require durable, high-performance nozzles, these 3D printer nozzles ensure consistent extrusion and longer lifespan compared to standard brass nozzles.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003ePrusa MK4, E3D V6 Hotend Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Sizes\u003c\/td\u003e\n\u003ctd\u003e0.4mm, 0.6mm, 0.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePlated Copper with Nickel Coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Temperature\u003c\/td\u003e\n\u003ctd\u003e500°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproves thermal conductivity for more stable high-temperature printing on E3D V6 hotends\u003c\/li\u003e\n\u003cli\u003eNickel plating reduces filament sticking, minimizing clogs and stringing on Prusa MK4 and CoreXY printers\u003c\/li\u003e\n\u003cli\u003eSupports abrasive and high-temp filaments like ABS, Nylon, and Polycarbonate without rapid wear\u003c\/li\u003e\n\u003cli\u003eAvailable in multiple nozzle sizes to optimize layer resolution and print speed\u003c\/li\u003e\n\u003cli\u003eExtends nozzle lifespan compared to standard brass nozzles, reducing maintenance downtime\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrusa MK4 users upgrading their E3D V6 hotend nozzles for high-temp printing\u003c\/li\u003e\n\u003cli\u003eCoreXY and high-speed 3D printer builders requiring durable, non-stick nozzles\u003c\/li\u003e\n\u003cli\u003eEnthusiasts printing abrasive or high-temperature filaments like ABS and Nylon\u003c\/li\u003e\n\u003cli\u003eUsers seeking reliable nozzle performance for consistent extrusion and layer quality\u003c\/li\u003e\n\u003cli\u003eReplacement nozzles for E3D V6 hotend compatible printers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese plated copper nozzles excel with high-temperature and abrasive filaments, ensuring smooth extrusion and durability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — ideal for high-temp printing with excellent layer adhesion\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/nylon-filament\"\u003eNylon Filament\u003c\/a\u003e — benefits from the nozzle's wear resistance and thermal stability\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/polycarbonate-pc-filament\"\u003ePolycarbonate (PC) Filament\u003c\/a\u003e — requires high-temp nozzles for reliable extrusion\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735628902694,"sku":"TRI0487","price":8.99,"currency_code":"USD","in_stock":true},{"title":".6mm (T-V6)","offer_id":52735628935462,"sku":"TRI0488","price":8.99,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735628968230,"sku":"TRI0489","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/plated-copper-v6-nozzles-4mm-6mm-8mm-e3d-trianglelab-west3d-printing-trianglelab-107067.jpg?v=1773259402"},{"product_id":"genuine-e3d-v6-nozzles-plated-copper","title":"Genuine E3D V6 Nozzles Plated Copper","description":"\u003cp\u003eHigh-temperature 3D printing enthusiasts using E3D V6 hotends often face nozzle wear and filament sticking issues that degrade print quality and reliability. Without a nozzle designed for elevated temperatures and non-abrasive materials, users risk clogging and inconsistent extrusion.\u003c\/p\u003e\u003cp\u003eThese Genuine E3D V6 Plated Copper Nozzles offer enhanced thermal conductivity and a nickel-plated surface that reduces filament adhesion, making them ideal for high-temperature, non-abrasive printing up to 500°C. Compatible with E3D V6 heater blocks, these nozzles serve the Voron, Trident, and other CoreXY builds that rely on E3D V6 hotends for precision printing. Available in multiple orifice sizes from 0.25mm to 0.80mm, they enable fine detail or faster, stronger prints depending on your application.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eVoron 2.4, Trident, CoreXY builds with E3D V6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eNickel-plated copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Temperature\u003c\/td\u003e\n\u003ctd\u003e500°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Sizes\u003c\/td\u003e\n\u003ctd\u003e0.25mm, 0.30mm, 0.35mm, 0.40mm, 0.50mm, 0.60mm, 0.80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Hotend\u003c\/td\u003e\n\u003ctd\u003eE3D V6 heater block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproves thermal transfer for consistent extrusion at high temperatures up to 500°C\u003c\/li\u003e\n\u003cli\u003eNickel plating reduces filament sticking, minimizing clogs and print defects\u003c\/li\u003e\n\u003cli\u003eSupports fine detail printing or faster extrusion with multiple nozzle sizes\u003c\/li\u003e\n\u003cli\u003eIdeal for Voron 2.4, Trident, and other CoreXY printers using E3D V6 hotends\u003c\/li\u003e\n\u003cli\u003eDurable alternative to standard brass nozzles in non-abrasive filament applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders upgrading to high-temp capable nozzles\u003c\/li\u003e\n\u003cli\u003eCoreXY users requiring reliable extrusion at elevated temperatures\u003c\/li\u003e\n\u003cli\u003e3D printing enthusiasts using E3D V6 hotends for detailed or high-speed prints\u003c\/li\u003e\n\u003cli\u003eNon-abrasive filament printing where reduced stickiness improves print quality\u003c\/li\u003e\n\u003cli\u003eUsers needing a range of nozzle sizes for versatile print profiles\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese plated copper nozzles excel with non-abrasive filaments requiring high-temperature extrusion, ensuring smooth flow and reduced clogging.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — ideal for detailed prints with reduced sticking\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/petg-filament\"\u003ePETG Filament\u003c\/a\u003e — benefits from improved thermal conductivity for consistent extrusion\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — supports higher temperature printing without nozzle wear\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".25mm","offer_id":52735630606630,"sku":"E3D0751-DISC","price":14.99,"currency_code":"USD","in_stock":false},{"title":".3mm","offer_id":52735630639398,"sku":"E3D0752","price":14.99,"currency_code":"USD","in_stock":true},{"title":".35mm","offer_id":52735630672166,"sku":"E3D0753","price":14.99,"currency_code":"USD","in_stock":true},{"title":".4mm","offer_id":52735630704934,"sku":"V6-NOZZLE-COP-175-400","price":14.99,"currency_code":"USD","in_stock":true},{"title":".5mm","offer_id":52735630737702,"sku":"E3D0755","price":14.99,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735630770470,"sku":"V6-NOZZLE-COP-175-600","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/genuine-e3d-v6-nozzles-plated-copper-west3d-printing-e3d-738245.webp?v=1773259403"},{"product_id":"genuine-e3d-v6-nozzles-brass-single-and-fun-pack","title":"Genuine E3D V6 Nozzles Brass Single and Fun Pack","description":"\u003cp\u003ePrecision and reliability in nozzle performance are critical for E3D V6 hotend users, especially in the CoreXY and Cartesian printer communities where print quality hinges on consistent extrusion. Without genuine E3D V6 brass nozzles, users risk uneven layers and poor surface finish due to suboptimal thermal transfer and wear.\u003c\/p\u003e\u003cp\u003eThese genuine E3D V6 brass nozzles feature E3D’s signature internal geometry optimized for smooth filament flow and thermal conductivity, making them ideal for everyday printing with standard, non-abrasive filaments. Compatible with the E3D V6 heater block, these nozzles come in a variety of sizes from 0.25mm to 0.8mm, allowing users to tailor their extrusion width for fine detail or faster, stronger prints. Popular among Voron, Prusa MK4, and Ender 3 users upgrading or maintaining their hotends, these brass nozzles support print temperatures up to 300°C and are not compatible with Volcano or SuperVolcano heater blocks.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eVoron 2.4, Prusa MK4, Ender 3, Universal E3D V6 Hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Size\u003c\/td\u003e\n\u003ctd\u003eM6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Sizes Included\u003c\/td\u003e\n\u003ctd\u003e0.25mm, 0.30mm, 0.35mm, 0.50mm, 0.60mm, 0.80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Temperature\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnsure consistent extrusion and layer quality on E3D V6 hotends used in Voron 2.4 and Prusa MK4 builds\u003c\/li\u003e\n\u003cli\u003eAccess a range of nozzle sizes for detailed prints or faster, stronger extrusion on Ender 3 and CoreXY printers\u003c\/li\u003e\n\u003cli\u003eReplace worn or damaged nozzles to prevent clogs and under-extrusion issues common in daily printing\u003c\/li\u003e\n\u003cli\u003eMaintain optimal thermal transfer for smooth layers with standard PLA, PETG, and ABS filaments\u003c\/li\u003e\n\u003cli\u003eCompatible with a wide range of 3D printers using the E3D V6 hotend, supporting community-standard upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders upgrading their hotend nozzles for precision printing\u003c\/li\u003e\n\u003cli\u003ePrusa MK4 users seeking reliable, genuine E3D V6 brass nozzles for everyday filament types\u003c\/li\u003e\n\u003cli\u003eEnder 3 and Ender 3 Pro owners replacing stock nozzles with authentic E3D parts\u003c\/li\u003e\n\u003cli\u003eCoreXY and Cartesian printer enthusiasts requiring a variety of nozzle sizes for different print profiles\u003c\/li\u003e\n\u003cli\u003eUsers needing a cost-effective nozzle pack for standard non-abrasive filament printing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoosing the correct nozzle size enhances print quality and filament compatibility, especially with standard filaments.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — ideal for fine detail prints using smaller nozzle sizes\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/petg-filament\"\u003ePETG Filament\u003c\/a\u003e — benefits from smooth extrusion with E3D V6 brass nozzles\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — compatible with the 300°C max temperature rating of brass nozzles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".25mm","offer_id":52735632113958,"sku":"E3D0743","price":11.99,"currency_code":"USD","in_stock":false},{"title":".3mm","offer_id":52735632146726,"sku":"E3D0744","price":11.99,"currency_code":"USD","in_stock":true},{"title":".35mm","offer_id":52735632179494,"sku":"E3D0745","price":11.99,"currency_code":"USD","in_stock":true},{"title":".4mm","offer_id":52735632212262,"sku":"E3D0746","price":11.99,"currency_code":"USD","in_stock":false},{"title":".5mm","offer_id":52735632245030,"sku":"E3D0747","price":11.99,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735632277798,"sku":"E3D0748","price":11.99,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735632310566,"sku":"E3D0749","price":11.99,"currency_code":"USD","in_stock":true},{"title":"Fun Pack","offer_id":52735632343334,"sku":"E3D0750","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/genuine-e3d-v6-nozzles-brass-single-and-fun-pack-west3d-printing-e3d-122092.jpg?v=1773259403"},{"product_id":"volcano-brass-nozzles","title":"Volcano Brass Nozzles","description":"\u003cp\u003eHigh-flow nozzles like the Volcano brass variants are essential for CoreXY and high-speed 3D printer builds where standard nozzles limit extrusion rates, causing under-extrusion and longer print times. Without these nozzles, users face slower prints and reduced layer adhesion on large or high-temperature prints.\u003c\/p\u003e\u003cp\u003eThese Trianglelab Volcano brass nozzles are premium alternatives to the E3D Volcano standard, designed for high flow rates and faster melting of filament. They are widely used in Voron 2.4, Trident, and other CoreXY printers that utilize the E3D Volcano hotend system. The brass construction offers excellent thermal conductivity, ensuring stable extrusion and consistent layer quality during high-speed printing.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eVoron 2.4, Trident, CoreXY builds with E3D Volcano hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Hotend\u003c\/td\u003e\n\u003ctd\u003eE3D Volcano style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse Case\u003c\/td\u003e\n\u003ctd\u003eHigh flow, high-speed printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnables higher extrusion rates for faster print speeds on Voron 2.4 and Trident CoreXY printers\u003c\/li\u003e\n\u003cli\u003eImproves thermal transfer compared to steel nozzles, reducing clogging and under-extrusion\u003c\/li\u003e\n\u003cli\u003eSupports large layer heights and high-temperature filaments without sacrificing print quality\u003c\/li\u003e\n\u003cli\u003eTrianglelab quality ensures reliable performance in demanding high-flow applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders upgrading to high flow nozzles for faster prints\u003c\/li\u003e\n\u003cli\u003eCoreXY enthusiasts requiring reliable Volcano nozzle compatibility\u003c\/li\u003e\n\u003cli\u003eUsers running E3D Volcano hotends seeking improved thermal conductivity\u003c\/li\u003e\n\u003cli\u003eHigh-speed printing with PLA, PETG, and ABS filaments\u003c\/li\u003e\n\u003cli\u003eLarge format 3D printers needing consistent extrusion at high flow rates\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese high flow nozzles unlock faster printing speeds and better layer adhesion, especially with filaments that benefit from stable thermal transfer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — ideal for fast, detailed prints with excellent surface finish\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/petg-filament\"\u003ePETG Filament\u003c\/a\u003e — benefits from stable extrusion at higher flow rates\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — supports high-temperature printing with improved layer bonding\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735635489062,"sku":"TRI0838","price":4.99,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735635521830,"sku":"TRI0839","price":4.99,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735635554598,"sku":"TRI0840","price":4.99,"currency_code":"USD","in_stock":true},{"title":"1mm","offer_id":52735635587366,"sku":"TRI0841","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/volcano-brass-nozzles-west3d-printing-trianglelab-145791.jpg?v=1773259403"},{"product_id":"phaetus-brass-nozzles-for-v6-style-hot-ends","title":"Phaetus Brass Nozzles for V6 Style Hot Ends","description":"\u003cp\u003eV6 style hotend users often face issues with inconsistent extrusion and nozzle wear, which can lead to poor print quality and frequent maintenance. Brass nozzles with precise orifice diameters help maintain stable flow and reduce adhesion, preventing clogs and under-extrusion during prints.\u003c\/p\u003e\u003cp\u003eThese Phaetus Brass Nozzles for V6 Style Hot Ends deliver high accuracy with a minimum orifice diameter of 0.1mm ±0.01mm, suitable for both 1.75mm and 3.00mm filaments. Crafted from first-class brass with special processing to eliminate burrs and debris, they ensure smooth filament flow and long-lasting gloss without oxidation. Compatible with most 3D printers using V6 style hotends, including popular CoreXY and Cartesian models, these nozzles support a wide range of filaments such as PLA, ABS, TPU, Nylon, PETG, and more.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eUniversal (V6 Style Hot Ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrifice Diameter\u003c\/td\u003e\n\u003ctd\u003e0.1mm to 1.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTolerance\u003c\/td\u003e\n\u003ctd\u003e±0.01mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Hole Roughness\u003c\/td\u003e\n\u003ctd\u003e≤ Ra 0.4 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConcentricity\u003c\/td\u003e\n\u003ctd\u003e≤ 0.02 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd\u003e1.75mm \/ 3.00mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnsures precise extrusion for high-detail prints on V6 hotend printers like Prusa MK4 and Ender 3 upgrades\u003c\/li\u003e\n\u003cli\u003eReduces nozzle clogging and filament adhesion with smooth inner surfaces\u003c\/li\u003e\n\u003cli\u003eCompatible with a broad range of filaments including flexible TPU and abrasive materials like Nylon\u003c\/li\u003e\n\u003cli\u003eImproves print consistency and reduces maintenance frequency for CoreXY and Cartesian builds\u003c\/li\u003e\n\u003cli\u003eMaintains stable thermal properties to support high-speed printing without degradation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrusa MK4 and Ender 3 users upgrading to reliable V6 style brass nozzles\u003c\/li\u003e\n\u003cli\u003eCoreXY builders requiring precise nozzle diameters for detailed prints\u003c\/li\u003e\n\u003cli\u003eKlipper ecosystem users seeking consistent extrusion performance\u003c\/li\u003e\n\u003cli\u003e3D printer owners printing with flexible and standard filaments like TPU and PLA\u003c\/li\u003e\n\u003cli\u003eUsers needing a durable nozzle with low oxidation for long print sessions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoosing the right nozzle diameter and quality brass nozzle enhances filament flow and print quality across common materials.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — ideal for detailed prints with smooth extrusion\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/tpu-flexible-filament\"\u003eTPU Flexible Filament\u003c\/a\u003e — brass nozzles provide smooth flow for flexible materials\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/petg-filament\"\u003ePETG Filament\u003c\/a\u003e — supports consistent extrusion for durable prints\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735640469798,"sku":"PHA1222","price":3.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/phaetus-brass-nozzles-for-v6-style-hot-ends-west3d-printing-phaetus-811300.jpg?v=1773259407"},{"product_id":"creality-unicorn-obxidian-high-flow-brass-nozzle-by-e3d","title":"Creality Unicorn Obxidian High Flow Brass Nozzle by E3D","description":"\u003cp\u003eCreality K1C, K1 Max, and Ender 3 V3\/Plus users face extrusion limits that bottleneck print speed and quality, especially when printing abrasive or filled filaments. Without a high-flow nozzle designed for these printers, users risk jams, poor layer adhesion, and under-extrusion at high speeds.\u003c\/p\u003e\u003cp\u003eThe Creality Unicorn Obxidian High Flow Brass Nozzle by E3D is a premium 3D printer nozzle engineered specifically for Creality's K1C, K1 Max, and Ender 3 V3\/Plus models. This nozzle features a unique multi-channel internal design that splits filament flow into four channels, boosting volumetric flow rates up to 45 mm³\/s to support printing speeds up to 600 mm\/s. Its quad-metal construction includes a titanium HeatBreak and a hardened steel insert coated with E3DLC™, delivering exceptional wear resistance and thermal performance. This makes it ideal for abrasive and filled filaments like PLA-CF, ABS-CF, and PA-CF, while maintaining strong layer adhesion at high speeds.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eCreality K1C, K1 Max, Ender 3 V3\/Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eBrass with Hardened Steel Insert and E3DLC™ Coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeatBreak\u003c\/td\u003e\n\u003ctd\u003eTitanium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Volumetric Flow Rate\u003c\/td\u003e\n\u003ctd\u003e45 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Print Speed\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Filaments\u003c\/td\u003e\n\u003ctd\u003ePLA, ABS, PETG, TPU, PP, PC, PA, PLA-CF, ABS-CF, PETG-CF, PC-CF, PA-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncrease print speeds on Creality K1C, K1 Max, and Ender 3 V3\/Plus without sacrificing extrusion quality\u003c\/li\u003e\n\u003cli\u003ePrint abrasive and filled filaments reliably thanks to the hardened steel insert and E3DLC™ coating\u003c\/li\u003e\n\u003cli\u003eReduce nozzle wear and plastic build-up for longer maintenance intervals\u003c\/li\u003e\n\u003cli\u003eMaintain strong layer adhesion at high volumetric flow rates for functional parts\u003c\/li\u003e\n\u003cli\u003eQuick and easy nozzle changes under 5 minutes to minimize downtime\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCreality K1C and K1 Max owners seeking high-speed, high-flow printing\u003c\/li\u003e\n\u003cli\u003eEnder 3 V3\/Plus users upgrading to handle abrasive composite filaments\u003c\/li\u003e\n\u003cli\u003eUsers printing carbon fiber and other filled filaments requiring wear-resistant nozzles\u003c\/li\u003e\n\u003cli\u003eFunctional part printing where layer strength and speed are critical\u003c\/li\u003e\n\u003cli\u003e3D printing enthusiasts wanting to maximize their printer’s motion system capabilities\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis high-flow nozzle unlocks the potential of abrasive and composite filaments, enabling faster, stronger prints with specialty materials.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/carbon-fiber-filament\"\u003eCarbon Fiber Filament\u003c\/a\u003e — ideal for functional parts requiring stiffness and wear resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — supports high-temperature, durable prints at increased speeds\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/nylon-filament\"\u003eNylon Filament\u003c\/a\u003e — benefits from the nozzle’s abrasion resistance for tough, flexible parts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735645253926,"sku":"E3D2586.4M","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/creality-unicorn-obxidian-high-flow-brass-nozzle-by-e3d-west3d-3d-printing-supplies-e3d-614888.webp?v=1773259411"},{"product_id":"creality-unicorn-high-flow-brass-nozzle-by-e3d","title":"Creality Unicorn High Flow Brass Nozzle by E3D","description":"\u003cp\u003eCreality K1C, K1 Max, and Ender 3 V3 series users often face extrusion limits that bottleneck their high-speed printing ambitions, causing under-extrusion and weak layer adhesion at faster print speeds.\u003c\/p\u003e\u003cp\u003eThe Creality Unicorn High Flow Brass Nozzle by E3D is engineered to overcome these challenges with a unique multi-channel internal design that increases volumetric flow rate up to 52 mm³\/s, enabling reliable extrusion at speeds up to 600 mm\/s. This all-metal nozzle integrates a titanium HeatBreak to maintain sharp thermal gradients, reducing heat creep and filament jams. Ideal for Creality K1C, K1 Max, and Ender 3 V3\/Plus and KE\/SE models using the Unicorn hotend, it supports a wide range of filaments including PLA, ABS, PETG, TPU, PP, PC, and PA.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eCreality K1C, K1 Max, Ender 3 V3\/Plus, Ender 3 V3 KE\/SE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Volumetric Flow Rate\u003c\/td\u003e\n\u003ctd\u003e52 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Print Speed\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eBrass nozzle with titanium HeatBreak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Filaments\u003c\/td\u003e\n\u003ctd\u003ePLA, ABS, PETG, TPU, PP, PC, PA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnables Creality K1C and K1 Max users to fully utilize their printers' high-speed motion systems without extrusion bottlenecks\u003c\/li\u003e\n\u003cli\u003eImproves layer adhesion and part strength at speeds up to 600 mm\/s, critical for functional prints\u003c\/li\u003e\n\u003cli\u003eReduces heat creep and filament jams with titanium HeatBreak, enhancing print reliability\u003c\/li\u003e\n\u003cli\u003eSupports a broad filament range including flexible TPU and engineering-grade PC and PA\u003c\/li\u003e\n\u003cli\u003eQuick nozzle changes under 5 minutes minimize downtime for Ender 3 V3 series users\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCreality K1C and K1 Max owners upgrading to high-flow nozzles for faster print speeds\u003c\/li\u003e\n\u003cli\u003eEnder 3 V3\/Plus and KE\/SE users seeking improved extrusion consistency with Unicorn hotends\u003c\/li\u003e\n\u003cli\u003eFunctional part printing requiring strong layer adhesion at high speeds\u003c\/li\u003e\n\u003cli\u003eMulti-material printing including flexible and engineering filaments\u003c\/li\u003e\n\u003cli\u003eUsers needing quick and reliable nozzle swaps to reduce maintenance time\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis high-flow nozzle unlocks the potential of advanced filaments and high-speed printing, making filament choice critical for optimal results.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — ideal for fast, detailed prints with excellent surface finish\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — for durable, heat-resistant parts benefiting from improved layer adhesion\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/tpu-flexible-filament\"\u003eTPU Flexible Filament\u003c\/a\u003e — supported by the nozzle’s design for reliable flexible material extrusion\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735645384998,"sku":"E3D2583.4M","price":34.95,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735645417766,"sku":"E3D2584.6M","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/creality-unicorn-high-flow-brass-nozzle-by-e3d-west3d-3d-printing-supplies-e3d-641918.webp?v=1773259411"},{"product_id":"bondtech-cht-high-flow-bi-metal-abrasive-resistant-nozzles-m6-v6-various-sizes","title":"Bondtech CHT High Flow Bi-Metal Abrasive Resistant Nozzles M6 (V6) Various Sizes","description":"\u003cp\u003eCoreXY and RepRap builders often face nozzle wear and limited flow rates when printing abrasive or high-speed materials, leading to clogs and weak layer adhesion that compromise print strength and speed. Without a high-flow, abrasion-resistant nozzle, print quality and efficiency suffer, especially on demanding prints.\u003c\/p\u003e\u003cp\u003eThe Bondtech CHT High Flow Bi-Metal Abrasive Resistant Nozzle M6 (V6) is engineered to increase your hotend's melting capacity, enabling faster printing and stronger layer bonding. Designed for RepRap and V6-style hotends, this nozzle features a copper body with hardened steel inserts and a nickel coating for superior abrasion resistance against fiber-filled and particle-laden filaments. Available in multiple sizes (0.40, 0.60, 0.80, and 1.0mm), it supports both 1.75mm and 2.85mm filaments, making it ideal for high-flow applications on printers like the Voron 2.4, Trident, and other CoreXY builds that demand durability and speed.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eVoron 2.4, Trident, CoreXY, RepRap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Sizes\u003c\/td\u003e\n\u003ctd\u003e0.40, 0.60, 0.80, 1.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Diameter Compatibility\u003c\/td\u003e\n\u003ctd\u003e1.75 mm and 2.85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCopper body with Hardened Steel inserts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating\u003c\/td\u003e\n\u003ctd\u003eNickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003eRepRap M6 (V6 compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncrease melt capacity by up to 30% for faster print speeds on Voron 2.4 and Trident CoreXY printers\u003c\/li\u003e\n\u003cli\u003eResist abrasive wear from fiber-filled and composite filaments, extending nozzle life\u003c\/li\u003e\n\u003cli\u003eImprove layer adhesion and part strength with optimized filament splitting technology\u003c\/li\u003e\n\u003cli\u003eCompatible with both 1.75mm and 2.85mm filaments for versatile material use\u003c\/li\u003e\n\u003cli\u003eReduce clogging and maintenance downtime in high-flow printing scenarios\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders upgrading to high-flow, abrasion-resistant nozzles\u003c\/li\u003e\n\u003cli\u003eCoreXY enthusiasts printing abrasive materials like carbon fiber or glow-in-the-dark filaments\u003c\/li\u003e\n\u003cli\u003eRepRap users seeking durable nozzles compatible with V6 hotends\u003c\/li\u003e\n\u003cli\u003eUsers requiring multiple nozzle sizes for flexible print resolution and speed\u003c\/li\u003e\n\u003cli\u003eHigh-speed printing setups demanding reliable layer adhesion and flow rates\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis nozzle’s abrasion resistance and high flow capacity make it ideal for advanced filaments that challenge standard nozzles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/carbon-fiber-filament\"\u003eCarbon Fiber Filament\u003c\/a\u003e — withstand abrasive fibers without nozzle wear\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/nylon-filament\"\u003eNylon Filament\u003c\/a\u003e — print strong, flexible parts with improved layer bonding\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — benefit from higher melt rates for faster, reliable ABS prints\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735645548838,"sku":"BON2632.4M","price":39.9,"currency_code":"USD","in_stock":true},{"title":".5mm","offer_id":52735645581606,"sku":"BON2637.5M","price":39.9,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735645614374,"sku":"BON2638.6M","price":39.9,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735645647142,"sku":"BON2639.8M","price":39.9,"currency_code":"USD","in_stock":true},{"title":"1mm","offer_id":52735645679910,"sku":"BON26401MM","price":39.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/bondtech-cht-high-flow-bi-metal-abrasive-resistant-nozzles-m6-v6-various-sizes-west3d-3d-printing-supplies-bondtech-988867.jpg?v=1773259411"},{"product_id":"e3d-obxidian-500-prusa-nextruder-nozzles-for-prusa-mk4-xl-coreone-etc","title":"E3D ObXiDian 500 Prusa Nextruder Nozzles for Prusa MK4, XL, CoreOne etc.","description":"\u003cp\u003ePrusa MK4, XL, and CoreOne users know that abrasive filament wear quickly degrades standard nozzles, causing print defects and frequent replacements that interrupt production. Without a durable nozzle, printing high-speed or abrasive materials risks nozzle erosion and poor surface finish.\u003c\/p\u003e\u003cp\u003eThe E3D ObXiDian 500 Prusa Nextruder Nozzle is a premium, high-flow hardened nozzle engineered in collaboration with Prusa for the Nextruder system. Designed as a direct drop-in upgrade for Prusa MK4, XL, CoreOne, and MK3.9 series printers, it features ObXiDian 500 technology that offers at least five times the wear resistance of standard hardened nozzles. Its advanced low-surface-energy coating prevents plastic buildup and nozzle gunk, ensuring cleaner prints and reduced maintenance even when printing abrasive filaments like carbon fiber, wood-fill, or glow-in-the-dark. The toolless nozzle change system enables quick swaps without modifications, maximizing uptime for high-speed, high-quality printing.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003ePrusa MK4, Prusa XL, Prusa CORE One, CORE One L, Prusa MK3.9, MK3.9S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating Technology\u003c\/td\u003e\n\u003ctd\u003eObXiDian 500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWear Resistance\u003c\/td\u003e\n\u003ctd\u003e5x standard ObXiDian nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Compatibility\u003c\/td\u003e\n\u003ctd\u003eAll filaments including abrasive (carbon fiber, wood-fill, glow-in-the-dark)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Change\u003c\/td\u003e\n\u003ctd\u003eToolless Nextruder system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrusa MK4 and XL users printing abrasive filaments benefit from dramatically extended nozzle lifespan with ObXiDian 500 technology.\u003c\/li\u003e\n\u003cli\u003eCoreOne and MK3.9 series owners reduce print failures caused by nozzle clogging and plastic buildup.\u003c\/li\u003e\n\u003cli\u003eHigh-speed Prusa Nextruder builds maintain consistent flow and surface finish with the high-flow design.\u003c\/li\u003e\n\u003cli\u003eToolless nozzle swaps minimize downtime during maintenance or filament changes.\u003c\/li\u003e\n\u003cli\u003eCompatible with a wide range of filaments, enabling versatile printing without nozzle wear concerns.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrusa MK4 and XL users upgrading to a hardened nozzle for abrasive filament printing.\u003c\/li\u003e\n\u003cli\u003eCoreOne and CORE One L owners seeking reliable, long-lasting nozzles for high-speed printing.\u003c\/li\u003e\n\u003cli\u003ePrusa MK3.9 and MK3.9S users replacing stock nozzles with a premium, wear-resistant option.\u003c\/li\u003e\n\u003cli\u003eEnthusiasts printing carbon fiber, wood-fill, or glow-in-the-dark filaments on Prusa Nextruder systems.\u003c\/li\u003e\n\u003cli\u003eUsers requiring quick, toolless nozzle changes to maximize printer uptime.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaximize the durability and print quality of your Prusa Nextruder by pairing this nozzle with abrasive and specialty filaments designed for high-performance printing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/carbon-fiber-filament\"\u003eCarbon Fiber Filament\u003c\/a\u003e — ideal for functional parts requiring strength and wear resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — compatible with high-temperature printing and durable applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/nylon-filament\"\u003eNylon Filament\u003c\/a\u003e — perfect for flexible, strong parts that benefit from the nozzle's abrasion resistance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735647154470,"sku":"E3D3861.4M","price":69.99,"currency_code":"USD","in_stock":false},{"title":".6mm","offer_id":52735647187238,"sku":"E3D3862.6M","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/e3d-high-flow-obxidian-500-prusa-nextruder-nozzles-for-prusa-mk4-xl-coreone-etc-copy-west3d-3d-printing-supplies-e3d-8134395_1473aa7d-081d-4be3-9ebf-c7c3d709cc78.png?v=1773259418"},{"product_id":"e3d-revo-obxidian-500-nozzles","title":"E3D Revo ObXiDian 500 Nozzles","description":"\u003cp\u003eIn the E3D Revo ecosystem, abrasive filament wear is a common cause of nozzle degradation, leading to poor print quality and frequent replacements. Without a durable nozzle like the ObXiDian 500, users risk clogging and inconsistent extrusion during demanding prints.\u003c\/p\u003e\u003cp\u003eThe E3D Revo ObXiDian 500 Nozzle is engineered for high-performance and maximum longevity, designed specifically for the Revo system including Revo Six, Revo Micro, Revo Voron, and Revo Hemera hotends. This preassembled nozzle and heat break unit offers exceptional wear resistance, ideal for printing abrasive materials such as carbon fiber nylon, glass fiber PLA\/PETG, and metal-filled composites. Its advanced construction reduces defects and enables reliable, high-speed printing for professionals and serious hobbyists pushing the limits of their 3D printers.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eRevo Six, Revo Micro, Revo Voron, Revo Hemera\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eObXiDian Hardened Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePreassembled Unit\u003c\/td\u003e\n\u003ctd\u003eYes (Nozzle + HeatBreak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Compatibility\u003c\/td\u003e\n\u003ctd\u003eAbrasive filaments (CF-Nylon, Glass Fiber PLA\/PETG, Metal-Filled, Wood-Filled)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSignificantly extends nozzle lifespan when printing abrasive filaments like carbon fiber and metal composites\u003c\/li\u003e\n\u003cli\u003ePreassembled nozzle and heat break eliminate hot tightening errors and reduce hotend leaks\u003c\/li\u003e\n\u003cli\u003eCompatible with all E3D Revo hotends, including Revo Voron and Revo Hemera builds\u003c\/li\u003e\n\u003cli\u003eImproves print quality by minimizing clogs and extrusion inconsistencies during high-speed printing\u003c\/li\u003e\n\u003cli\u003eEnables professionals and engineers to push their printers to higher performance levels with confidence\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron builders using Revo Voron hotends requiring durable nozzles for abrasive materials\u003c\/li\u003e\n\u003cli\u003eUsers of Revo Six and Revo Micro hotends upgrading for longer nozzle life\u003c\/li\u003e\n\u003cli\u003eSerious hobbyists printing carbon fiber nylon and metal-filled filaments\u003c\/li\u003e\n\u003cli\u003eEngineers and professionals demanding reliable, high-flow nozzles for complex prints\u003c\/li\u003e\n\u003cli\u003eRevo Hemera users seeking a maintenance-free nozzle and heat break solution\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaximize your E3D Revo ObXiDian 500 nozzle’s performance by pairing it with filaments designed for durability and strength.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/carbon-fiber-filament\"\u003eCarbon Fiber Filament\u003c\/a\u003e — ideal for high-strength, abrasion-resistant prints\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/nylon-filament\"\u003eNylon Filament\u003c\/a\u003e — perfect for durable functional parts requiring toughness\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — suitable for high-temperature and impact-resistant applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735647416614,"sku":"E3D3858.4M","price":74.99,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735647449382,"sku":"E3D3859.6M","price":74.99,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735647482150,"sku":"E3D3860.8M","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/e3d-revo-high-flow-obxidian-500-nozzles-west3d-3d-printing-supplies-e3d-8020524.png?v=1773259417"},{"product_id":"e3d-high-flow-obxidian-500-prusa-nextruder-nozzles-for-prusa-mk4-xl-coreone-etc","title":"E3D High Flow ObXiDian 500 Prusa Nextruder Nozzles for Prusa MK4, XL, CoreOne etc.","description":"\u003cp\u003ePrusa MK4, XL, and CoreOne users pushing for higher print speeds often face nozzle wear and flow limitations that reduce print quality and increase downtime. Without a high-performance nozzle, abrasive filaments can quickly degrade standard brass nozzles, causing clogs and inconsistent extrusion.\u003c\/p\u003e\u003cp\u003eThe E3D High Flow ObXiDian 500 Prusa Nextruder Nozzle is engineered specifically for Prusa Nextruder hotends on models including the MK4, MK4S, XL, CORE One, and CORE One L. Featuring ObXiDian® 500 technology, this tool-steel nozzle with E3DLC™ coating offers up to 5 times the wear resistance of previous ObXiDian nozzles, making it ideal for abrasive materials like carbon fiber and glass fiber filaments. Its unique 4-channel internal geometry enhances heat transfer and volumetric flow rate, enabling faster print speeds without sacrificing surface finish or strength. The low-surface-energy coating reduces plastic build-up, minimizing print failures and maintenance.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003ePrusa MK4, MK4S, XL, CORE One, CORE One L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Sizes\u003c\/td\u003e\n\u003ctd\u003e0.4mm, 0.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eTool Steel with E3DLC™ Coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWear Resistance\u003c\/td\u003e\n\u003ctd\u003e5x ObXiDian Standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Temperature Rating\u003c\/td\u003e\n\u003ctd\u003eUp to 500°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Geometry\u003c\/td\u003e\n\u003ctd\u003e4-Channel High Flow Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrusa MK4 and XL users can maximize their printer’s motion system with increased volumetric flow for faster, high-quality prints.\u003c\/li\u003e\n\u003cli\u003eObXiDian 500 technology extends nozzle life significantly when printing abrasive filaments like carbon fiber and glow-in-the-dark materials.\u003c\/li\u003e\n\u003cli\u003eLow-surface-energy coating reduces filament build-up, preventing clogs and print failures common in high-speed printing.\u003c\/li\u003e\n\u003cli\u003eSeamless drop-in replacement for Prusa Nextruder hotends requires no hardware modifications or complex installation.\u003c\/li\u003e\n\u003cli\u003eSupports future-proof printing with a temperature rating up to 500°C for advanced engineering materials.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrusa MK4 and MK4S owners upgrading to high-speed, abrasive filament printing.\u003c\/li\u003e\n\u003cli\u003ePrusa XL users seeking improved flow rates without sacrificing print quality.\u003c\/li\u003e\n\u003cli\u003eCORE One and CORE One L builders requiring durable nozzles for extended print runs.\u003c\/li\u003e\n\u003cli\u003eEnthusiasts printing carbon fiber, glass fiber, or glow-in-the-dark filaments on Prusa Nextruder setups.\u003c\/li\u003e\n\u003cli\u003eUsers wanting a hassle-free nozzle upgrade with no changes to existing hardware or cooling ducts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnlock the full potential of your Prusa printer by pairing this nozzle with filaments designed for high performance and durability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/carbon-fiber-filament\"\u003eCarbon Fiber Filament\u003c\/a\u003e — maximize wear resistance and print strength with abrasive-filled materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/nylon-filament\"\u003eNylon Filament\u003c\/a\u003e — benefit from high flow rates and smooth extrusion for engineering-grade parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — leverage the nozzle’s high-temperature capability for reliable ABS printing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735647580454,"sku":"E3D3867.4M","price":87.49,"currency_code":"USD","in_stock":false},{"title":".6mm","offer_id":52735647613222,"sku":"E3D3868.6M","price":87.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/e3d-high-flow-obxidian-500-prusa-nextruder-nozzles-for-prusa-mk4-xl-coreone-etc-copy-west3d-3d-printing-supplies-e3d-8134395.png?v=1773259418"},{"product_id":"e3d-obxidian-nozzle-for-v6-style","title":"E3D ObXidian Nozzle for V6 Style","description":"\u003cp\u003eFDM and CoreXY builders printing abrasive fiber-filled filaments face rapid nozzle wear that degrades print quality and causes under-extrusion. Without a wear-resistant nozzle, prints suffer from inconsistent extrusion and frequent nozzle replacements.\u003c\/p\u003e\u003cp\u003eThe E3D ObXidian Nozzle for V6 Style is engineered for high-wear resistance, combining a copper alloy body with a tool steel insert coated in E3DLC™ for exceptional hardness and non-stick properties. This nozzle maintains thermal performance close to brass, allowing seamless drop-in replacement on E3D V6 hotends used in Prusa MK4, Voron 2.4, and other CoreXY printers. Available in 0.4mm and 0.6mm diameters, it supports printing abrasive fiber-filled polymers like carbon fiber and glass fiber composites without accelerated wear.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003ePrusa MK4, Voron 2.4, CoreXY printers with E3D V6 hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCopper alloy with tool steel insert and E3DLC™ coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Filament Diameter\u003c\/td\u003e\n\u003ctd\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Sizes\u003c\/td\u003e\n\u003ctd\u003e0.4mm, 0.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Temperature\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrevents rapid nozzle wear when printing abrasive fiber-filled filaments on E3D V6 hotends\u003c\/li\u003e\n\u003cli\u003eMaintains consistent extrusion and print quality for high-performance materials like carbon fiber PLA and nylon\u003c\/li\u003e\n\u003cli\u003eCompatible with popular CoreXY and Prusa MK4 builds that rely on E3D V6 style nozzles\u003c\/li\u003e\n\u003cli\u003eReduces plastic buildup thanks to E3DLC™ non-stick coating, minimizing clogs and maintenance\u003c\/li\u003e\n\u003cli\u003eSupports higher temperature printing up to 300°C for advanced engineering filaments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrusa MK4 users upgrading to abrasion-resistant nozzles for fiber-filled filaments\u003c\/li\u003e\n\u003cli\u003eVoron 2.4 and other CoreXY builders requiring durable nozzles for composite materials\u003c\/li\u003e\n\u003cli\u003eEnthusiasts printing abrasive materials like carbon fiber, glass fiber, and metal-filled filaments\u003c\/li\u003e\n\u003cli\u003eUsers seeking a drop-in replacement nozzle with thermal performance similar to brass\u003c\/li\u003e\n\u003cli\u003e3D printer owners using E3D V6 hotends who want to reduce nozzle wear and maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis nozzle excels when paired with abrasive fiber-filled filaments, ensuring durability and consistent extrusion.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/carbon-fiber-filament\"\u003eCarbon Fiber Filament\u003c\/a\u003e — ideal for high-strength, wear-resistant prints\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/nylon-filament\"\u003eNylon Filament\u003c\/a\u003e — compatible with higher temperature and abrasive blends\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — supports engineering-grade materials requiring stable extrusion\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735649480998,"sku":"V6-NOZZLE-OBX-0400-SPK","price":44.79,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735649513766,"sku":"E3D1298","price":44.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/e3d-obxidian-nozzle-for-v6-style-west3d-printing-e3d-205062.png?v=1773259426"},{"product_id":"e3d-revo-ht-abrasive-high-temperature-nozzles-for-revo-hotend-htx","title":"E3D Revo HT-Abrasive High Temperature Nozzles for Revo Hotend (HTX)","description":"\u003cp\u003eHigh-temperature and abrasive filament users in the Revo hotend ecosystem face nozzle wear and heat transfer inefficiencies that degrade print quality and cause frequent replacements. Without a durable nozzle, prints risk under-extrusion and inconsistent layer adhesion, especially at elevated temperatures.\u003c\/p\u003e\u003cp\u003eThe E3D Revo HT-Abrasive Nozzle (HTX) is a preassembled nozzle and HeatBreak unit designed for Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, and Revo Biqu H2 V2 hotends. Featuring a hardened steel tip with a copper carrier and spreader segment, it optimizes heat transfer to the heatsink while the Chromium Nitride coating provides abrasion resistance up to 500°C. This nozzle eliminates hot tightening risks and hotend leaks, ensuring reliable high-temperature printing with abrasive filaments.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Temperature\u003c\/td\u003e\n\u003ctd\u003e500°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eRevo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePreassembled nozzle and HeatBreak unit prevents assembly errors and hotend leaks common in Revo hotends.\u003c\/li\u003e\n\u003cli\u003eChromium Nitride coating resists abrasion from carbon fiber, glow-in-the-dark, and other abrasive filaments, extending nozzle life.\u003c\/li\u003e\n\u003cli\u003eOptimized copper carrier and spreader improve heat transfer, stabilizing extrusion at temperatures up to 500°C.\u003c\/li\u003e\n\u003cli\u003eEngraved size markings enable quick nozzle identification, reducing downtime during maintenance.\u003c\/li\u003e\n\u003cli\u003eCompatible with a wide range of Revo hotend variants used in Voron, Prusa, and other custom builds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders using Revo Voron hotends requiring abrasion-resistant nozzles.\u003c\/li\u003e\n\u003cli\u003ePrusa MK3 and Prusa Mini users upgrading to high-temperature, wear-resistant nozzles.\u003c\/li\u003e\n\u003cli\u003eRevo Hemera XS and Revo MicroSwiss NG owners printing abrasive filaments like carbon fiber blends.\u003c\/li\u003e\n\u003cli\u003eEnthusiasts running Revo Biqu H2 V2 hotends needing reliable high-temp nozzle performance.\u003c\/li\u003e\n\u003cli\u003eUsers printing with abrasive or high-temp filaments up to 500°C requiring durable nozzle solutions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis nozzle is engineered to handle abrasive and high-temperature filaments, ensuring consistent extrusion and extended nozzle life.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/carbon-fiber-filament\"\u003eCarbon Fiber Filament\u003c\/a\u003e — abrasion resistance protects nozzle from fiber wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — optimized heat transfer supports stable high-temp printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/nylon-filament\"\u003eNylon Filament\u003c\/a\u003e — withstands abrasive and high-temp requirements for engineering-grade prints.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735651086630,"sku":"E3D1451","price":64.99,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735651119398,"sku":"E3D1452","price":64.99,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735651152166,"sku":"E3D1453","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/e3d-revo-htx-high-temperature-nozzles-for-revo-hotend-west3d-printing-e3d-128599.webp?v=1773259426"},{"product_id":"e3d-high-flow-nozzle-for-revo-hot-ends-revo-hf-revo-high-flow-nozzle","title":"E3D High Flow Nozzle for Revo Hot Ends (Revo HF \/ Revo High Flow Nozzle)","description":"\u003cp\u003eHigh volumetric flow rates are essential for CoreXY and high-speed 3D printer builds like the Voron 2.4 and Trident, where print speed and quality depend on efficient filament melting. Without a high flow nozzle, users face slower print times and limited layer height options, reducing overall productivity.\u003c\/p\u003e\u003cp\u003eThe E3D High Flow Nozzle for Revo Hot Ends enhances your Revo setup by increasing volumetric flow without changing the hotend’s form factor, ensuring compatibility with existing mounts and fan ducts. Designed for Voron, Trident, and other Revo-compatible printers, this nozzle supports a wide range of sizes from 0.4mm up to 1.4mm, enabling faster printing and better thermal transfer. It’s ideal for users printing with standard and high-flow filaments like HTPLA and PLA³, and pairs well with the optional 60W Revo HeaterCore for high-temperature materials such as polycarbonate.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eVoron 2.4, Trident, Other Revo Hotend Compatible Printers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Sizes\u003c\/td\u003e\n\u003ctd\u003e0.4mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForm Factor\u003c\/td\u003e\n\u003ctd\u003eStandard Revo Hotend Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended HeaterCore\u003c\/td\u003e\n\u003ctd\u003e40W Standard or 60W for High Temp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncrease print speeds on CoreXY and high-speed printers like Voron 2.4 and Trident by improving volumetric flow rate.\u003c\/li\u003e\n\u003cli\u003eMaintain compatibility with existing Revo mounts and fan ducts—no hardware modifications needed.\u003c\/li\u003e\n\u003cli\u003eExpand nozzle size options up to 1.4mm for large layer heights and faster extrusion.\u003c\/li\u003e\n\u003cli\u003eOptimize thermal transfer for consistent melting and reduce under-extrusion risks.\u003c\/li\u003e\n\u003cli\u003eSupport high-temperature filaments when paired with the 60W Revo HeaterCore.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders seeking faster print speeds without hardware changes.\u003c\/li\u003e\n\u003cli\u003eUsers upgrading Revo hotends for high-flow filament printing.\u003c\/li\u003e\n\u003cli\u003eCoreXY enthusiasts requiring reliable high-volume extrusion.\u003c\/li\u003e\n\u003cli\u003ePrints using HTPLA, PLA³, and other high-flow optimized filaments.\u003c\/li\u003e\n\u003cli\u003eHigh-temperature material printing when combined with a 60W Revo HeaterCore.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaximize your high-flow nozzle’s potential by choosing filaments that benefit from increased extrusion rates and thermal stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — Ideal for fast, reliable prints with standard and high-flow nozzles.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/tpu-flexible-filament\"\u003eTPU Flexible Filament\u003c\/a\u003e — Compatible with Revo setups for flexible material printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/petg-filament\"\u003ePETG Filament\u003c\/a\u003e — Supports higher temperature extrusion and durability.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735652626726,"sku":"RC-NOZZLE-HF-0400-AS-SPK","price":42.99,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735652659494,"sku":"E3D1278","price":42.99,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735652692262,"sku":"E3D1279","price":42.99,"currency_code":"USD","in_stock":true},{"title":"1mm","offer_id":52735652725030,"sku":"E3D1280","price":42.99,"currency_code":"USD","in_stock":true},{"title":"1.2mm","offer_id":52735652757798,"sku":"E3D1281","price":42.99,"currency_code":"USD","in_stock":true},{"title":"1.4mm","offer_id":52735652790566,"sku":"RC-NOZZLE-HF-1400-AS-SPK","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/e3d-high-flow-nozzle-for-revo-hot-ends-revo-hf-revo-high-flow-nozzle-west3d-printing-e3d-632431.png?v=1773259426"},{"product_id":"bondtech-cht-high-flow-nozzles-mk8-nickel-coated-brass-various-sizes","title":"Bondtech CHT High Flow Nozzles MK8 Nickel Coated Brass Various Sizes","description":"\u003cp\u003eHigh-flow nozzles are essential for CoreXY and Cartesian printers pushing speed and volume, where insufficient melt capacity leads to under-extrusion and weak layer adhesion. Without optimized nozzles, prints risk poor strength and surface quality, especially on high-speed Voron, Ender 3, and BMG-equipped setups.\u003c\/p\u003e\u003cp\u003eThe Bondtech CHT High Flow MK8 Nickel Coated Brass Nozzle enhances your hotend's melting capacity by splitting filament into three thinner strands, enabling faster melting and higher volumetric flow rates. Designed for MK8 hotends, it supports both 1.75mm and 2.85mm filaments and comes in sizes from 0.40mm up to 1.8mm, ideal for Voron 2.4, Ender 3 Pro, and other MK8-compatible printers. The nickel coating reduces corrosion and abrasion, improving filament feed and reducing plastic adhesion for consistent extrusion and longer nozzle life.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eVoron 2.4, Ender 3, Ender 3 Pro, Trident\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Sizes\u003c\/td\u003e\n\u003ctd\u003e0.40, 0.60, 0.80, 1.0, 1.4, 1.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Diameter Compatibility\u003c\/td\u003e\n\u003ctd\u003e1.75 mm and 2.85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eBrass with Nickel Coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex Size\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Standard\u003c\/td\u003e\n\u003ctd\u003eMK8 (M6×1×5×13)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncrease melt capacity for faster print speeds on Voron 2.4 and Trident CoreXY builds\u003c\/li\u003e\n\u003cli\u003eImprove layer adhesion and part strength on Ender 3 and Ender 3 Pro printers\u003c\/li\u003e\n\u003cli\u003eReduce nozzle wear and filament jams with nickel coating, especially when printing abrasive or composite filaments\u003c\/li\u003e\n\u003cli\u003eEnable reliable high-flow extrusion for flexible and rigid filaments in 1.75mm and 2.85mm formats\u003c\/li\u003e\n\u003cli\u003eCompatible with BMG extruder upgrades requiring precise, high-volume melt rates\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders seeking higher volumetric flow rates\u003c\/li\u003e\n\u003cli\u003eEnder 3 and Ender 3 Pro users upgrading to high-flow nozzles for faster prints\u003c\/li\u003e\n\u003cli\u003eCoreXY and Cartesian printers using MK8 hotends requiring nickel-coated durability\u003c\/li\u003e\n\u003cli\u003eUsers printing flexible TPU and rigid PLA filaments at high speeds\u003c\/li\u003e\n\u003cli\u003e3D printing enthusiasts needing multiple nozzle sizes for different materials\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOptimizing your nozzle flow capacity pairs well with filaments that demand consistent extrusion and strong layer bonding.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — ideal for high-speed prints with excellent layer adhesion\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/tpu-flexible-filament\"\u003eTPU Flexible Filament\u003c\/a\u003e — benefits from smooth extrusion enabled by nickel coating\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/petg-filament\"\u003ePETG Filament\u003c\/a\u003e — requires reliable melt flow for strong, durable parts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735654166822,"sku":"BON2641.4M","price":19.9,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735654199590,"sku":"BON2643.6M","price":19.9,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735654232358,"sku":"BON2644.8M","price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/bondtech-cht-high-flow-nozzles-mk8-nickel-coated-brass-various-sizes-west3d-3d-printing-supplies-bondtech-719537.webp?v=1773259426"},{"product_id":"zodiac-v6-nozzles-by-e3d-bi-layer-coated-hardened-nozzles-pro-and-crb","title":"Zodiac V6 Nozzles by E3D - Bi-layer coated hardened nozzles (PRO and CRB)","description":"\u003cp\u003eV6 heater block users often face nozzle wear and filament buildup that degrade print quality and cause extrusion issues over time. Without a durable nozzle, prints can suffer from inconsistent flow and surface defects, especially when printing abrasive or high-temperature materials.\u003c\/p\u003e\u003cp\u003eThe Zodiac V6 Nozzles by E3D are precision-engineered hardened tool steel nozzles featuring a bi-layer coating designed to reduce filament adhesion and extend nozzle life. Available in CRB and Pro variants, these nozzles are optimized for V6 heater blocks commonly found on printers like the Prusa MK4, Ender 3 upgrades, and various CoreXY builds. The CRB nozzle offers excellent wear resistance and supports temperatures up to 300°C, ideal for standard filaments, while the Pro nozzle withstands up to 450°C for advanced high-temp materials like polycarbonate and nylon. These 3D printer nozzles provide consistent extrusion and durability for demanding printing environments.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003ePrusa MK4, Ender 3 (upgrades), CoreXY builds with V6 heater blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase Material\u003c\/td\u003e\n\u003ctd\u003eHardened tool steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating\u003c\/td\u003e\n\u003ctd\u003eZodiac Bi-Layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating Hardness (CRB)\u003c\/td\u003e\n\u003ctd\u003e2900 HV ± 500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating Hardness (Pro)\u003c\/td\u003e\n\u003ctd\u003e3500 HV ± 500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Temperature (CRB)\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Temperature (Pro)\u003c\/td\u003e\n\u003ctd\u003e450°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReduce filament buildup and nozzle clogging common in V6 heater block setups\u003c\/li\u003e\n\u003cli\u003eExtend nozzle lifespan with hardened tool steel and bi-layer coating for abrasive filaments\u003c\/li\u003e\n\u003cli\u003ePrint high-temperature materials reliably with Pro nozzles rated up to 450°C\u003c\/li\u003e\n\u003cli\u003eImprove extrusion consistency on popular printers like Prusa MK4 and Ender 3 upgrades\u003c\/li\u003e\n\u003cli\u003eMaintain print quality in demanding CoreXY and Klipper-based builds\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrusa MK4 users upgrading to hardened nozzles for abrasive filament printing\u003c\/li\u003e\n\u003cli\u003eEnder 3 and Ender 3 Pro owners replacing stock brass nozzles with durable hardened steel\u003c\/li\u003e\n\u003cli\u003eCoreXY builders requiring wear-resistant nozzles for high-speed printing\u003c\/li\u003e\n\u003cli\u003eKlipper ecosystem users seeking reliable extrusion at elevated temperatures\u003c\/li\u003e\n\u003cli\u003e3D printing enthusiasts working with nylon, polycarbonate, and other high-temp filaments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoosing the right nozzle enhances your ability to print advanced filaments with precision and durability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/carbon-fiber-filament\"\u003eCarbon Fiber Filament\u003c\/a\u003e — hardened nozzles resist abrasive fibers for longer life\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/nylon-filament\"\u003eNylon Filament\u003c\/a\u003e — Pro nozzles handle high extrusion temperatures needed for nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — maintain consistent flow and reduce clogging with coated nozzles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"CRB \/ .4mm","offer_id":52735655117094,"sku":"E3D1587","price":9.96,"currency_code":"USD","in_stock":true},{"title":"CRB \/ .6mm","offer_id":52735655149862,"sku":"E3D1588","price":9.96,"currency_code":"USD","in_stock":false},{"title":"PRO \/ .4mm","offer_id":52735655182630,"sku":"E3D1589","price":9.96,"currency_code":"USD","in_stock":false},{"title":"PRO \/ .6mm","offer_id":52735655215398,"sku":"E3D1590","price":9.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/zodiac-v6-nozzles-by-e3d-bi-layer-coated-hardened-nozzles-pro-and-crb-west3d-3d-printing-supplies-e3d-506317.webp?v=1773259426"},{"product_id":"e3d-high-flow-obxidian-nozzle-for-revo-hot-ends","title":"E3D High Flow ObXidian Nozzle for Revo Hot Ends","description":"\u003cp\u003eCoreXY and high-speed 3D printer users often face nozzle wear and flow limitations when printing abrasive materials, leading to clogs and longer print times. Without a durable, high-flow nozzle, print quality and efficiency suffer, especially on printers using the E3D Revo hotend system.\u003c\/p\u003e\u003cp\u003eThe E3D High Flow ObXidian Nozzle for Revo Hot Ends is engineered for Voron, Trident, and other CoreXY builds utilizing the Revo hotend. Featuring a copper and hardened steel assembly with E3DLC™ coating, it offers wear resistance comparable to ruby or tungsten carbide nozzles while reducing plastic buildup thanks to its non-stick surface. This nozzle increases volumetric flow rates with a custom internal geometry, enabling faster printing of abrasive filaments without modifying existing mounts or fan ducts. Available in sizes from 0.4mm up to 1.4mm, it supports versatile printing needs and reduces downtime with its preassembled nozzle and heat break design.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eVoron 2.4, Trident, Switchwire, CoreXY printers with Revo HotEnds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCopper\/Hardened Steel with E3DLC™ coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Diameter\u003c\/td\u003e\n\u003ctd\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Temperature\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Sizes\u003c\/td\u003e\n\u003ctd\u003e0.4mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncrease volumetric flow rate for faster printing of abrasive filaments on Voron 2.4 and Trident builds.\u003c\/li\u003e\n\u003cli\u003eReduce nozzle wear and plastic buildup with ObXidian coating, extending nozzle life in high-speed CoreXY printers.\u003c\/li\u003e\n\u003cli\u003ePreassembled nozzle and heat break design eliminates hot tightening errors and prevents hotend leaks common in Revo hotend setups.\u003c\/li\u003e\n\u003cli\u003eWide range of nozzle sizes supports both high-resolution and large-format printing without hardware changes.\u003c\/li\u003e\n\u003cli\u003eColor-coded silicone socks and engraved sizes enable quick nozzle identification and swapping, minimizing downtime.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders upgrading to high-flow, wear-resistant nozzles for abrasive materials.\u003c\/li\u003e\n\u003cli\u003eSwitchwire and other CoreXY users requiring reliable, fast extrusion with Revo hotends.\u003c\/li\u003e\n\u003cli\u003eAdvanced users printing abrasive filaments like carbon fiber or metal composites on Revo-equipped printers.\u003c\/li\u003e\n\u003cli\u003e3D printing enthusiasts seeking easy nozzle swaps without adjusting mounts or fan ducts.\u003c\/li\u003e\n\u003cli\u003eUsers needing a durable nozzle solution to reduce clogging and maintenance on high-temperature prints.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis nozzle’s high flow and wear resistance make it ideal for printing abrasive and high-temperature filaments with minimal downtime.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/carbon-fiber-filament\"\u003eCarbon Fiber Filament\u003c\/a\u003e — optimized for abrasive composite materials requiring durable nozzles.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/nylon-filament\"\u003eNylon Filament\u003c\/a\u003e — benefits from improved thermal transfer and flow rates for faster prints.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — supports high-temperature printing with consistent extrusion.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735660392742,"sku":"E3D1815","price":59.95,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735660425510,"sku":"E3D2446.6M","price":59.95,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735660458278,"sku":"RC-NOZZLE-HF-OBX-0800-AS-SPK","price":59.95,"currency_code":"USD","in_stock":true},{"title":"1mm","offer_id":52735660491046,"sku":"E3D1817","price":59.95,"currency_code":"USD","in_stock":true},{"title":"1.2mm","offer_id":52735660523814,"sku":"E3D1818","price":59.95,"currency_code":"USD","in_stock":true},{"title":"1.4mm","offer_id":52735660556582,"sku":"E3D1819","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/e3d-high-flow-obxidian-nozzle-for-revo-hot-ends-west3d-3d-printing-supplies-e3d-400196.webp?v=1773259427"},{"product_id":"genuine-original-prusa-xl-mk4-coreone-obxidian-abrasive-resistant-nozzles-by-e3d","title":"Genuine Original Prusa XL \/ MK4 \/ CoreOne Obxidian Abrasive Resistant Nozzles  by E3D","description":"\u003cp\u003ePrusa MK4 and XL users printing abrasive or filled filaments face rapid nozzle wear that degrades print quality and increases downtime. Without a durable nozzle, prints risk under-extrusion and surface defects from nozzle erosion.\u003c\/p\u003e\u003cp\u003eThese Genuine Original ObXidian Abrasive Resistant Nozzles by E3D are engineered specifically for Prusa's Nextruder system on MK4, XL, and CoreOne printers. Featuring a tool steel insert coated with E3DLC™, they deliver wear resistance orders of magnitude beyond standard hardened nozzles, ideal for abrasive materials like carbon fiber and glass fiber-filled filaments. The all-metal filament path and engraved size markings simplify nozzle changes and improve reliability for high-speed, high-flow printing.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003ePrusa MK4, Prusa XL, Prusa CoreOne\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating\u003c\/td\u003e\n\u003ctd\u003eE3DLC™\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eTool Steel Insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse Case\u003c\/td\u003e\n\u003ctd\u003eAbrasive and Filled Filaments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Path\u003c\/td\u003e\n\u003ctd\u003eAll-Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Identification\u003c\/td\u003e\n\u003ctd\u003eEngraved Size Markings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSignificantly extends nozzle life when printing abrasive filaments like carbon fiber and glass fiber composites on Prusa MK4 and XL.\u003c\/li\u003e\n\u003cli\u003eReduces print defects caused by nozzle wear, maintaining consistent extrusion and surface finish.\u003c\/li\u003e\n\u003cli\u003eEnables faster nozzle changes with engraved size markings and all-metal filament path on Nextruder-equipped printers.\u003c\/li\u003e\n\u003cli\u003eSupports high-speed, high-flow printing without sacrificing quality on Prusa CoreOne and Nextruder systems.\u003c\/li\u003e\n\u003cli\u003eOutperforms standard hardened nozzles, reducing maintenance frequency for demanding engineering filaments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrusa MK4 and XL users printing abrasive or filled filaments requiring durable nozzles.\u003c\/li\u003e\n\u003cli\u003eCoreOne owners upgrading to a high-wear resistant nozzle compatible with their Nextruder.\u003c\/li\u003e\n\u003cli\u003eEngineers and makers using carbon fiber, glass fiber, or other composite filaments on Prusa printers.\u003c\/li\u003e\n\u003cli\u003eUsers seeking simplified nozzle changes with engraved size markings and all-metal filament paths.\u003c\/li\u003e\n\u003cli\u003eHigh-speed print enthusiasts needing reliable, high-flow nozzle performance on Prusa Nextruder systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaximize your ObXidian nozzle’s lifespan by pairing it with abrasive and engineering-grade filaments designed for demanding applications.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/carbon-fiber-filament\"\u003eCarbon Fiber Filament\u003c\/a\u003e — ideal for strong, lightweight parts requiring wear-resistant nozzles.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/nylon-filament\"\u003eNylon Filament\u003c\/a\u003e — durable and flexible, often filled with abrasives that benefit from ObXidian nozzles.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — common engineering plastic compatible with high-temperature, wear-resistant nozzles.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735661211942,"sku":"PRUSA-MK4-NOZZLE-OBX-AS-0400","price":59.99,"currency_code":"USD","in_stock":false},{"title":".6mm","offer_id":52735661244710,"sku":"E3D2199.6M","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/genuine-original-prusa-xl-and-mk4-obxidian-abrasive-resistant-nozzles-by-e3d-west3d-3d-printing-supplies-e3d-136408.webp?v=1773259427"},{"product_id":"phaetus-plated-copper-nozzles-for-v6-style-hot-ends","title":"Phaetus Plated Copper Nozzles for V6 Style Hot Ends","description":"\u003cp\u003eHigh-temperature printing with V6 style hotends often struggles with maintaining stable nozzle temperatures, leading to inconsistent extrusion and print defects when using advanced engineering plastics. Without a nozzle designed for thermal stability and smooth filament flow, prints with materials like PEEK or PEI can suffer from clogging and poor surface finish.\u003c\/p\u003e\u003cp\u003eThe Phaetus Plated Copper Nozzle for V6 Style Hot Ends is engineered for demanding applications requiring temperatures up to 500℃, making it ideal for printing high-performance filaments such as PEEK, PEKK, PEI, PSU, and PPSU. Its superior copper alloy construction ensures excellent thermal conductivity, maintaining an even temperature at the nozzle tip for stable extrusion and faster print speeds without sacrificing quality. The nickel plating and special post-processing reduce adhesion and prevent burrs or debris, enhancing print reliability. This nozzle is widely used in Voron, Trident, and other CoreXY builds equipped with V6 style hotends, as well as in high-temperature capable printers running Klipper or Marlin firmware.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eVoron 2.4, Trident, CoreXY builds with V6 hotends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eNickel-plated copper alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Temperature\u003c\/td\u003e\n\u003ctd\u003e500℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Orifice Diameter\u003c\/td\u003e\n\u003ctd\u003e0.25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTolerance\u003c\/td\u003e\n\u003ctd\u003e± 0.01 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Hole Roughness\u003c\/td\u003e\n\u003ctd\u003e≤ Ra0.4 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConcentricity\u003c\/td\u003e\n\u003ctd\u003e≤ 0.02 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnsures stable extrusion at high temperatures for advanced filaments like PEEK and PEI, reducing clogs and print failures.\u003c\/li\u003e\n\u003cli\u003eImproves thermal transfer and temperature consistency at the nozzle tip, critical for CoreXY and Voron 2.4 printers using V6 hotends.\u003c\/li\u003e\n\u003cli\u003eNickel plating and smooth internal finish minimize filament adhesion and nozzle wear, extending nozzle life.\u003c\/li\u003e\n\u003cli\u003eEnables faster print speeds without sacrificing surface quality, ideal for engineering-grade prints.\u003c\/li\u003e\n\u003cli\u003eCompatible with popular high-temp printer builds running Klipper or Marlin firmware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders printing high-temperature engineering plastics.\u003c\/li\u003e\n\u003cli\u003eCoreXY enthusiasts upgrading V6 style hotends for improved thermal performance.\u003c\/li\u003e\n\u003cli\u003eUsers of Klipper firmware requiring reliable extrusion at elevated temperatures.\u003c\/li\u003e\n\u003cli\u003eAdvanced material printing with PEEK, PEKK, PEI, PSU, and PPSU filaments.\u003c\/li\u003e\n\u003cli\u003eHigh-speed printing setups demanding consistent nozzle temperature and flow.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis plated copper nozzle excels when paired with high-temperature and engineering-grade filaments, ensuring optimal extrusion and surface finish.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — for durable, heat-resistant prints requiring stable nozzle temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/polycarbonate-pc-filament\"\u003ePolycarbonate (PC) Filament\u003c\/a\u003e — benefits from the nozzle's thermal conductivity for consistent extrusion.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/asa-filament\"\u003eASA Filament\u003c\/a\u003e — ideal for outdoor-grade prints needing high-temp nozzle stability.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735663735078,"sku":"PHA1223","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/phaetus-plated-copper-nozzles-for-v6-style-hot-ends-west3d-printing-phaetus-794845.jpg?v=1773259439"},{"product_id":"e3d-revo-high-flow-obxidian-500-nozzles","title":"E3D Revo High Flow ObXiDian 500 Nozzles","description":"\u003cp\u003eHigh-speed CoreXY and advanced 3D printer users often face nozzle wear and flow limitations that reduce print quality and slow production. Without a durable, high-flow nozzle, abrasive filaments cause rapid nozzle degradation and inconsistent extrusion, leading to print failures and downtime.\u003c\/p\u003e\u003cp\u003eThe E3D Revo High Flow ObXiDian 500 Nozzles are engineered for the Revo ecosystem, delivering extreme wear resistance and a revolutionary 4-channel internal geometry that boosts volumetric flow rates. Ideal for Voron, Trident, and other CoreXY builds using the E3D Revo system, these nozzles enable faster printing speeds without sacrificing quality. The ObXiDian 500 coating offers at least 5 times the wear resistance of standard ObXidian nozzles, making them perfect for abrasive materials like carbon fiber, glass-filled, and glow-in-the-dark filaments. The integrated Revo design allows quick, tool-free nozzle swaps, minimizing downtime and preventing hotend leaks.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eVoron 2.4, Trident, Switchwire, Other E3D Revo Compatible Printers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Technology\u003c\/td\u003e\n\u003ctd\u003eObXiDian® 500 Coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow Rate\u003c\/td\u003e\n\u003ctd\u003eHigh Flow with 4-Channel Internal Geometry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWear Resistance\u003c\/td\u003e\n\u003ctd\u003e5x More than ObXidian\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial Compatibility\u003c\/td\u003e\n\u003ctd\u003eCarbon Fiber, Glass-Filled, Glow-in-the-Dark, Metallic, Wood-Filled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eE3D Revo Quick-Change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders benefit from increased flow rates that unlock higher print speeds without sacrificing layer quality.\u003c\/li\u003e\n\u003cli\u003eCoreXY users printing abrasive filaments like carbon fiber composites avoid rapid nozzle wear and costly replacements.\u003c\/li\u003e\n\u003cli\u003eRevo system users gain frustration-free, tool-less nozzle swaps that reduce downtime and prevent hotend leaks.\u003c\/li\u003e\n\u003cli\u003ePrints with glow-in-the-dark and metallic filaments achieve consistent extrusion and reduced defects thanks to the non-stick E3DLC™ coating.\u003c\/li\u003e\n\u003cli\u003eHigh-speed motion systems can be fully utilized with reliable, consistent extrusion at elevated volumetric flow rates.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders upgrading to high-flow, wear-resistant nozzles for abrasive filament printing.\u003c\/li\u003e\n\u003cli\u003eSwitchwire and other E3D Revo system users seeking rapid nozzle changes and extended nozzle life.\u003c\/li\u003e\n\u003cli\u003eCoreXY enthusiasts printing carbon fiber, glass-filled, or glow-in-the-dark filaments requiring durable nozzles.\u003c\/li\u003e\n\u003cli\u003eAdvanced users aiming to maximize print speed without compromising quality or nozzle longevity.\u003c\/li\u003e\n\u003cli\u003e3D printer owners wanting to reduce downtime with tool-free, leak-resistant nozzle swaps.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaximize your E3D Revo High Flow ObXiDian 500 Nozzle’s potential by pairing it with abrasive and high-performance filaments designed for demanding prints.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/carbon-fiber-filament\"\u003eCarbon Fiber Filament\u003c\/a\u003e — for strong, wear-resistant parts that leverage the nozzle’s abrasion resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/nylon-filament\"\u003eNylon Filament\u003c\/a\u003e — ideal for durable functional parts requiring consistent extrusion at high speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — benefit from the nozzle’s high flow rate for faster printing with tough engineering plastics.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735664193830,"sku":"E3D3864.4M","price":87.49,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735664226598,"sku":"E3D3865.6M","price":87.49,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735664259366,"sku":"E3D3866.8M","price":87.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/e3d-revo-high-flow-obxidian-500-nozzles-west3d-3d-printing-supplies-e3d-8020524_53c87bca-de8b-4277-b308-228de3d85900.png?v=1773259440"},{"product_id":"bondtech-cht-high-flow-nozzles-m6-v6-nickel-coated-brass-various-sizes","title":"Bondtech CHT High Flow Nozzles M6 (V6) Nickel Coated Brass Various Sizes","description":"\u003cp\u003eHigh-flow nozzles like the Bondtech CHT are essential for RepRap and V6 hotend users aiming to overcome melting capacity limits that restrict print speed and part strength. Without these nozzles, users face slower builds and weaker layer adhesion, especially on high-flow or large-diameter prints.\u003c\/p\u003e\u003cp\u003eThe Bondtech CHT High Flow Nozzle M6 (V6) Nickel Coated Brass is engineered to increase your hotend's melting capacity by splitting filament into three thinner strands, enabling faster melting and higher volumetric flow rates. Compatible with popular RepRap and V6-style hotends, this nozzle supports both 1.75mm and 2.85mm filaments and is nickel coated to resist corrosion and abrasion, ensuring smoother filament feeding and longer nozzle life. Available in multiple sizes from 0.25mm up to 1.8mm, it suits a wide range of printing needs from fine detail to high-speed, large-layer prints.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eRepRap, V6-style hotends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd\u003e1.75mm and 2.85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Sizes\u003c\/td\u003e\n\u003ctd\u003e0.25, 0.40, 0.50, 0.60, 0.80, 1.0, 1.4, 1.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eBrass with Nickel Coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003eM6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRequires Wrench Size\u003c\/td\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncrease melt capacity for faster print speeds on RepRap and V6 hotends\u003c\/li\u003e\n\u003cli\u003eImprove layer adhesion and part strength with optimized filament splitting technology\u003c\/li\u003e\n\u003cli\u003eReduce nozzle wear and filament sticking thanks to nickel coating\u003c\/li\u003e\n\u003cli\u003eSupport both 1.75mm and 2.85mm filament diameters for versatile printing\u003c\/li\u003e\n\u003cli\u003eAvailable in large nozzle sizes (≥0.6mm) to achieve meaningful volumetric flow gains\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRepRap and custom V6 hotend users seeking higher throughput\u003c\/li\u003e\n\u003cli\u003eBondtech extruder owners upgrading to high flow nozzles\u003c\/li\u003e\n\u003cli\u003eCoreXY and high-speed printer builds requiring improved melt rates\u003c\/li\u003e\n\u003cli\u003eUsers printing abrasive or flexible filaments needing corrosion-resistant nozzles\u003c\/li\u003e\n\u003cli\u003e3D printing enthusiasts switching between 1.75mm and 2.85mm filament\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaximize the benefits of the Bondtech CHT nozzle by pairing it with filaments that demand high flow rates and strong layer bonding.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — ideal for high-temp, strong parts requiring reliable melt flow\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/nylon-filament\"\u003eNylon Filament\u003c\/a\u003e — benefits from corrosion resistance and high flow capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/carbon-fiber-filament\"\u003eCarbon Fiber Filament\u003c\/a\u003e — abrasive materials that require durable, nickel-coated nozzles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735664292134,"sku":"BON2626.4M","price":19.0,"currency_code":"USD","in_stock":true},{"title":".5mm","offer_id":52735664324902,"sku":"BON2627.5M","price":19.0,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735664357670,"sku":"BON2628.6M","price":19.0,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735664390438,"sku":"BON2629.8M","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1mm","offer_id":52735664423206,"sku":"BON26301MM","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/bondtech-cht-high-flow-nozzles-m6-v6-nickel-coated-brass-various-sizes-west3d-3d-printing-supplies-bondtech-867549.jpg?v=1773259440"},{"product_id":"bondtech-cht-volcano-high-flow-bi-metal-abrasive-resistant-nozzles-vol-various-sizes","title":"Bondtech CHT Volcano High Flow Bi-Metal Abrasive Resistant Nozzles VOL Various Sizes","description":"\u003cp\u003eHigh-flow hotends like the Bondtech CHT Volcano require nozzles that can handle increased melting capacity without wear, especially when printing abrasive filaments. Without a durable nozzle, users risk clogging, poor layer adhesion, and premature nozzle damage that compromise print quality and speed.\u003c\/p\u003e\u003cp\u003eThe Bondtech CHT Volcano High Flow Bi-Metal Abrasive Resistant Nozzle is engineered for high-speed, high-flow 3D printing with abrasive or fiber-filled filaments. Featuring a copper body with hardened steel inserts and nickel coating, this nozzle resists wear from carbon fiber, glow-in-the-dark, and other abrasive materials. It splits filament into three thinner strands to melt material more efficiently, enabling faster print speeds and stronger layer bonding. Compatible with 1.75mm and 2.85mm filament setups, it fits Volcano-style hotends common in Voron 2.4, Trident, and other CoreXY builds that demand high flow rates.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eVoron 2.4, Trident, CoreXY builds with Volcano hotends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd\u003e1.75mm and 2.85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Sizes\u003c\/td\u003e\n\u003ctd\u003e0.40mm, 0.60mm, 0.80mm, 1.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCopper body with hardened steel inserts and nickel coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWrench Size\u003c\/td\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncrease melting capacity for faster print speeds on high-flow hotends like Volcano\u003c\/li\u003e\n\u003cli\u003eResist wear and clogging when printing abrasive filaments such as carbon fiber or glow-in-the-dark\u003c\/li\u003e\n\u003cli\u003eImprove layer adhesion and part strength by efficiently melting filament into thinner strands\u003c\/li\u003e\n\u003cli\u003eCompatible with both 1.75mm and 2.85mm filament diameters for versatile use\u003c\/li\u003e\n\u003cli\u003eIdeal for Voron 2.4, Trident, and other CoreXY printers using Volcano hotends\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders upgrading to high-flow Volcano hotends\u003c\/li\u003e\n\u003cli\u003eCoreXY enthusiasts printing abrasive or fiber-filled filaments\u003c\/li\u003e\n\u003cli\u003eUsers seeking faster print speeds without sacrificing layer bonding\u003c\/li\u003e\n\u003cli\u003e3D printer owners needing durable nozzles for long print runs with abrasive materials\u003c\/li\u003e\n\u003cli\u003ePrinters configured for 1.75mm or 2.85mm filament diameters\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis nozzle unlocks the potential of abrasive and high-flow filaments, ensuring durability and print quality at increased speeds.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/carbon-fiber-filament\"\u003eCarbon Fiber Filament\u003c\/a\u003e — wear-resistant nozzle ideal for abrasive carbon fiber blends\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/nylon-filament\"\u003eNylon Filament\u003c\/a\u003e — supports high flow rates needed for strong, flexible nylon parts\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — improved layer adhesion for durable ABS prints\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735666389286,"sku":"BON2652.4M","price":44.9,"currency_code":"USD","in_stock":true},{"title":".5mm","offer_id":52735666422054,"sku":"BON2653.5M","price":44.9,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735666454822,"sku":"BON2654.6M","price":44.9,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735666487590,"sku":"BON2655.8M","price":44.9,"currency_code":"USD","in_stock":true},{"title":"1mm","offer_id":52735666520358,"sku":"BON26561MM","price":44.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/bondtech-cht-volcano-high-flow-bi-metal-abrasive-resistant-nozzles-vol-various-sizes-west3d-3d-printing-supplies-bondtech-394278.webp?v=1773259443"},{"product_id":"genuine-original-prusa-xl-mk4-coreone-complete-nozzles-by-e3d","title":"Genuine Original Prusa XL \/ MK4 \/ CoreOne Complete Nozzles  by E3D","description":"\u003cp\u003ePrusa MK4 and XL users know that nozzle wear and slow changeovers can limit print speed and quality, especially when experimenting with different materials or nozzle sizes. Without reliable nozzles designed for the Nextruder, print consistency and efficiency suffer.\u003c\/p\u003e\u003cp\u003eThese Genuine Original E3D nozzles are engineered specifically for Prusa’s latest Nextruder system, compatible exclusively with the MK4 and XL models. Featuring an all-metal filament guide, they ensure a fully metal filament path that enhances reliability and allows faster nozzle swaps. Each nozzle size is laser-engraved for easy identification, supporting quick changes during multi-material or multi-resolution prints. The high-flow brass design improves volumetric flow rate, enabling faster printing without sacrificing quality.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003ePrusa MK4, Prusa XL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Diameter\u003c\/td\u003e\n\u003ctd\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Temperature\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eBrass with all-metal filament guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrusa MK4 and XL users benefit from faster nozzle changes thanks to the all-metal filament guide and engraved size markings.\u003c\/li\u003e\n\u003cli\u003eHigh-flow brass nozzles increase volumetric flow rate, enabling quicker prints without compromising detail.\u003c\/li\u003e\n\u003cli\u003eImproved filament path reliability reduces clogs and print failures common with stock nozzles.\u003c\/li\u003e\n\u003cli\u003eSupports a wide range of filaments up to 300°C, ideal for PLA, PETG, and ABS printing.\u003c\/li\u003e\n\u003cli\u003eEssential for users experimenting with multiple nozzle sizes or materials on the Nextruder system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrusa MK4 and XL owners upgrading their Nextruder nozzle system for better print speed and reliability.\u003c\/li\u003e\n\u003cli\u003eUsers requiring quick nozzle swaps during multi-material or multi-resolution prints.\u003c\/li\u003e\n\u003cli\u003e3D printing enthusiasts focused on high-quality prints with consistent extrusion.\u003c\/li\u003e\n\u003cli\u003eThose printing with standard and high-flow brass nozzles for improved volumetric throughput.\u003c\/li\u003e\n\u003cli\u003ePrusa community members seeking genuine E3D parts optimized for their printers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese nozzles support a broad range of filaments, making them ideal for users who want to optimize print speed and quality across common materials.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — perfect for detailed prints with standard temperature requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/petg-filament\"\u003ePETG Filament\u003c\/a\u003e — benefits from the reliable filament path and higher flow rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — supported by the 300°C max temperature for durable parts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".25mm","offer_id":52735667372326,"sku":"E3D1582","price":29.99,"currency_code":"USD","in_stock":false},{"title":".4mm","offer_id":52735667405094,"sku":"E3D1583","price":29.99,"currency_code":"USD","in_stock":false},{"title":".6mm","offer_id":52735667437862,"sku":"PRUSA-MK4-NOZZLE-AS-0600","price":29.99,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735667470630,"sku":"E3D1585","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/genuine-original-prusa-xl-and-mk4-complete-nozzles-by-e3d-west3d-3d-printing-supplies-e3d-630832.webp?v=1773259446"},{"product_id":"phaetus-next-g-fiber-extreme-gradient-drop-effect-hotend-nextg","title":"Phaetus neXt G Fiber Extreme Gradient Drop Effect Hotend (NeXtG)","description":"\u003ch2\u003eUltra High Flow 45mm³\/s, RCC Heatbreak, V6 Compatible, Dragon Footprint\u003c\/h2\u003e\n\u003cp\u003eThe neXt G Fiber is Phaetus's high-flow hotend built specifically for people who print carbon fiber, glass fiber, and other abrasive composite filaments — and need it to survive. It combines a rigid kinematic coupling system, an RCC-coated all-metal heatbreak rated for ~100kg of continuous fiber printing, and a hardened steel nozzle included out of the box. Flow rates up to 45mm³\/s. Dragon footprint. V6 nozzle compatible.\u003c\/p\u003e\n\u003cp\u003e⚠️ \u003cstrong\u003eFiber vs Standard neXtG — pick the right one:\u003c\/strong\u003e The \u003cstrong\u003eFiber\u003c\/strong\u003e version uses an RCC-coated heatbreak and ships with a hardened steel nozzle — designed for abrasive materials like CF and GF composites. The standard neXtG uses a titanium heatbreak and ships with a plated copper nozzle — better for non-abrasive filaments at peak flow. If you're printing PET-CF, PA-CF, or similar, you're in the right place.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eThe Four Things That Make This Hotend Different\u003c\/h3\u003e\n\u003ch3\u003e1. Ultra High Flow — Up to 45mm³\/s\u003c\/h3\u003e\n\u003cp\u003eFlow rate is how fast the hotend can melt and push out plastic. Think of it like a garden hose — a bigger, wider hose moves more water per second. The neXt G has a larger melt zone than a standard hotend, and with the included ultra-high flow nut adapter installed, it extends that melt zone even further — reaching up to 45mm³\/s. That's the difference between printing at normal speed and printing at high speed without under-extrusion.\u003c\/p\u003e\n\u003ch3\u003e2. Rigid Kinematic Coupling System\u003c\/h3\u003e\n\u003cp\u003eThis is the structural innovation that makes the neXt G stand out. Traditional hotends connect the heater block to the heatsink with a single heatbreak tube — which can bend, snap, or twist during a crash or if the nozzle is over-tightened.\u003c\/p\u003e\n\u003cp\u003eThe neXt G uses a kinematic coupling — think of it like a tripod with three precise contact points instead of one wobbly leg. The heater block is locked rigid without being welded to the heatsink. Result: the block doesn't rotate when you tighten the nozzle (one-handed changes work cleanly), it doesn't transfer excessive heat up into the cold zone, and if your bed leveling fails and the nozzle drags across the print, the heatbreak doesn't snap.\u003c\/p\u003e\n\u003ch3\u003e3. RCC-Coated All-Metal Heatbreak\u003c\/h3\u003e\n\u003cp\u003eThe heatbreak is the thin tube that separates the hot zone from the cold zone — it's the most abused part of any hotend when printing fiber-filled filaments. Carbon fiber and glass fiber particles act like sandpaper inside the tube. A standard titanium or copper heatbreak wears through in a few kilograms.\u003c\/p\u003e\n\u003cp\u003eThe neXt G Fiber's RCC-coated heatbreak is rated for approximately \u003cstrong\u003e100kg of continuous printing\u003c\/strong\u003e with composite filaments. That's not a marketing claim — it's a Phaetus-published spec backed by the hardened coating that makes the inner surface resistant to abrasive wear.\u003c\/p\u003e\n\u003ch3\u003e4. Ceramic Heater Plate\u003c\/h3\u003e\n\u003cp\u003eOlder hotend designs used a ceramic ring heater — a circular element that wraps around the heater block. The neXt G uses a flat ceramic heater plate instead: faster heat-up, more even temperature distribution across the block, and easier to replace if it ever fails.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePrinter Compatibility\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinter \/ Platform\u003c\/th\u003e\n\u003cth\u003eCompatible?\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoron 2.4 \/ Trident \/ V0\u003c\/td\u003e\n\u003ctd\u003e✅ Drop-in\u003c\/td\u003e\n\u003ctd\u003eDragon footprint — fits all Dragon-compatible toolheads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCreality (Ender \/ CR series)\u003c\/td\u003e\n\u003ctd\u003e✅ Drop-in\u003c\/td\u003e\n\u003ctd\u003eDragon footprint compatible mounts available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrusa MK2 \/ MK2S \/ MK2.5 \/ MK3 \/ MK3S\u003c\/td\u003e\n\u003ctd\u003e✅ With adapter\u003c\/td\u003e\n\u003ctd\u003eRequires Groove Mount adapter (check GitHub)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAny printer with Dragon hotend mounts\u003c\/td\u003e\n\u003ctd\u003e✅ Drop-in\u003c\/td\u003e\n\u003ctd\u003eSame footprint, same mounting holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFull documentation and mount files available on the \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/github.com\/Dropeffect\/neXt-G-Hotend\" target=\"_blank\"\u003e DropEffect neXt G GitHub repository\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eV6 Nozzle Compatibility — Use What You Already Have\u003c\/h3\u003e\n\u003cp\u003eMost high-flow hotends require proprietary nozzles. The neXt G was specifically designed to accept standard V6 nozzles — one of the most widely available nozzle standards in the 3D printing ecosystem. If you already have a collection of V6 nozzles (brass, hardened steel, tungsten carbide), they work here. No new nozzle ecosystem to commit to.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCompatible Filaments (Fiber Version)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFilament\u003c\/th\u003e\n\u003cth\u003eCompatible?\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePET-CF \/ PET-GF\u003c\/td\u003e\n\u003ctd\u003e✅ Yes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePAHT-CF \/ PAHT-GF\u003c\/td\u003e\n\u003ctd\u003e✅ Yes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNexPA-CF25 \/ NexPA-GF25\u003c\/td\u003e\n\u003ctd\u003e✅ Yes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS-PAHT \/ S-Multi\u003c\/td\u003e\n\u003ctd\u003e✅ Yes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard PLA, PETG, ABS, ASA, PC, Nylon, TPU\u003c\/td\u003e\n\u003ctd\u003e✅ Yes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard (non-abrasive) filaments at peak flow\u003c\/td\u003e\n\u003ctd\u003e⚠️ Consider standard neXtG instead\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Specs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax flow rate\u003c\/td\u003e\n\u003ctd\u003e45mm³\/s (with ultra-high flow nut adapter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax printing temperature\u003c\/td\u003e\n\u003ctd\u003e320°C+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermistor\u003c\/td\u003e\n\u003ctd\u003ePT1000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeatbreak\u003c\/td\u003e\n\u003ctd\u003eRCC-coated all-metal (~100kg lifespan with CF\/GF filaments)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater\u003c\/td\u003e\n\u003ctd\u003eCeramic heater plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle included\u003c\/td\u003e\n\u003ctd\u003eHardened steel (V6 standard thread)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFootprint\u003c\/td\u003e\n\u003ctd\u003eDragon hotend — same mounting dimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament diameter\u003c\/td\u003e\n\u003ctd\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~40g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eBefore You Install — Quick Checklist\u003c\/h3\u003e\n\u003cp\u003e⚠️ Three things to do after mounting before you heat it up:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet PT1000 in firmware\u003c\/strong\u003e — this hotend uses a PT1000 thermistor, not the common NTC 100K. If your firmware is set to the wrong thermistor type, the temperature readings will be wrong and your printer will either not heat up or will overshoot dangerously. Verify in Klipper or Marlin before powering on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePID tune after installation\u003c\/strong\u003e — every hotend change needs a fresh PID tune to stabilize temperatures. Run it before your first print.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat-tighten the nozzle\u003c\/strong\u003e — heat to operating temperature, wait 1 minute, then give the nozzle a final snug tighten. This seals the nozzle against the heatbreak and prevents leaks.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon fiber and glass fiber filament users\u003c\/strong\u003e who keep burning through standard heatbreaks and nozzles — the RCC coating and included hardened steel nozzle are built for exactly this punishment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoron and CoreXY builders\u003c\/strong\u003e looking for a drop-in Dragon replacement with higher flow and a more robust structural design. No reprinting toolhead mounts — it fits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-speed printing setups\u003c\/strong\u003e where 45mm³\/s flow headroom prevents under-extrusion at speed without slicer compromises.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakers who want V6 nozzle freedom\u003c\/strong\u003e — tungsten carbide, hardened steel, brass, plated copper — the neXt G accepts them all without an adapter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnyone who has bent or snapped a heatbreak\u003c\/strong\u003e from a bed crash or an over-tightened nozzle — the kinematic coupling system protects against exactly that.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":52735668027686,"sku":"PHA1955","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/phaetus-next-g-fiber-extreme-gradient-drop-effect-hotend-nextg-west3d-3d-printing-supplies-phaetus-617328.webp?v=1773259446"},{"product_id":"genuine-original-prusa-xl-mk4-coreone-v6-nozzle-adaptors-by-e3d","title":"Genuine Original Prusa XL \/ MK4 \/ CoreOne V6 Nozzle Adaptors  by E3D","description":"\u003cp\u003ePrusa MK4 and XL users upgrading to the Nextruder toolhead face compatibility challenges with their existing E3D V6 nozzles, risking print failures or nozzle leaks without the proper adaptor. Ensuring a secure fit is critical to maintain print quality and avoid filament path issues.\u003c\/p\u003e\u003cp\u003eThis Genuine Original E3D V6 Nozzle Adaptor allows seamless reuse of your current E3D V6 nozzles on Prusa MK4, XL, and CoreOne printers equipped with the Nextruder extruder. Designed specifically for these models, it preserves the all-metal filament path integrity and supports 1.75mm filament diameter. This adaptor is essential for users wanting to leverage premium E3D V6 nozzles without purchasing new nozzles, maintaining consistent extrusion performance and print reliability.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003ePrusa MK4, Prusa XL, CoreOne\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Temperature\u003c\/td\u003e\n\u003ctd\u003eDependent on V6 Nozzle Choice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnsures compatibility of premium E3D V6 nozzles with Prusa MK4, XL, and CoreOne Nextruder toolheads\u003c\/li\u003e\n\u003cli\u003ePrevents filament leaks and extrusion inconsistencies caused by improper nozzle fit\u003c\/li\u003e\n\u003cli\u003eMaintains the all-metal filament path critical for high-temperature and abrasive filament printing\u003c\/li\u003e\n\u003cli\u003eSupports users transitioning from older Prusa models or upgrading extruders without replacing nozzles\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrusa MK4 and XL owners upgrading to the Nextruder extruder\u003c\/li\u003e\n\u003cli\u003eCoreOne users seeking to reuse existing E3D V6 nozzles\u003c\/li\u003e\n\u003cli\u003e3D printing enthusiasts wanting to maintain consistent extrusion with premium nozzles\u003c\/li\u003e\n\u003cli\u003eUsers printing with 1.75mm filament requiring reliable nozzle adaptors\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis adaptor supports the use of high-quality E3D V6 nozzles, enabling reliable printing with a wide range of filaments on Prusa MK4 and XL printers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — ideal for standard printing with excellent surface finish\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/petg-filament\"\u003ePETG Filament\u003c\/a\u003e — for durable, flexible prints compatible with all-metal hotends\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — suitable for high-temperature printing supported by the all-metal filament path\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":52735668322598,"sku":"E3D1586","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/genuine-original-prusa-xl-and-mk4-v6-nozzle-adaptors-by-e3d-west3d-3d-printing-supplies-e3d-124837.webp?v=1773259447"},{"product_id":"phaetus-taichi-dual-filament-hot-end","title":"Phaetus TaiChi Dual Filament Hot End","description":"\u003ch2\u003eAll-Metal, 500°C Max, One-Hand Nozzle Change (Blue \u0026amp; Black)\u003c\/h2\u003e\n\u003cp\u003eTwo filaments. One hotend. Zero leveling headaches. The Phaetus TaiChi is a 2-in-1 all-metal hotend built for dual-material and multi-color printing — without the alignment nightmares of a traditional dual extruder setup. Both filaments feed in through separate ports and print through a single nozzle, so you never have to worry about two toolheads being perfectly level with each other. There's only one.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003eBlue\u003c\/strong\u003e or \u003cstrong\u003eBlack\u003c\/strong\u003e — choose your color above.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat Makes This Hotend Different — Plain and Simple\u003c\/h3\u003e\n\u003cp\u003eImagine a water park slide with two lanes that merge into one at the bottom. Each lane is a different filament. They go in separately at the top, meet inside the hotend, and come out through one nozzle. That's the TaiChi in a nutshell.\u003c\/p\u003e\n\u003cp\u003eTraditional dual-extruder setups use two completely separate toolheads — and getting both of them to print at exactly the same height is a constant calibration battle. The TaiChi solves this by design: one hotend, two inputs, one output. Leveling is no different than a single hotend.\u003c\/p\u003e\n\u003cp\u003e⚠️ \u003cstrong\u003eImportant:\u003c\/strong\u003e The TaiChi is a \u003cstrong\u003eswitching\u003c\/strong\u003e dual hotend, not a mixing hotend. Both filaments feed in and print separately through one nozzle — it does not blend colors together. It switches between filament A and filament B.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual integrated feed ports\u003c\/strong\u003e — two Bowden collets at the top, one nozzle at the bottom. Feed two filaments, no dual toolhead calibration required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-metal construction\u003c\/strong\u003e — nickel-plated copper heater block, aluminum heatsink. No PTFE in the melt zone, which means you can print high-temperature filaments without degradation or toxic fumes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConical bi-metal heatbreak (0.25mm wall)\u003c\/strong\u003e — fits tightly against the heatsink for maximum heat dissipation. The thinner the wall, the sharper the transition from hot to cold — which means less clogging and cleaner retractions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium alloy support screws\u003c\/strong\u003e — titanium conducts heat 5× less than stainless steel. This keeps the cold zone cold and enables one-handed nozzle swaps without the block spinning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-handed nozzle changing\u003c\/strong\u003e — the titanium screws lock the heater block rigid so you can swap nozzles without holding anything down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500°C max printing temperature\u003c\/strong\u003e — confirmed in Phaetus official FAQ. Handles PEEK, PEI Ultem, and other high-performance engineering filaments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen source\u003c\/strong\u003e — full files and documentation available on GitHub.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eCompatible Printers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinter Series\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCreality Ender series\u003c\/td\u003e\n\u003ctd\u003e✅ Drop-in\u003c\/td\u003e\n\u003ctd\u003eDirect replacement, no modification needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCreality CR series\u003c\/td\u003e\n\u003ctd\u003e✅ Drop-in\u003c\/td\u003e\n\u003ctd\u003eDirect replacement, no modification needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther FDM printers\u003c\/td\u003e\n\u003ctd\u003e⚠️ With modification\u003c\/td\u003e\n\u003ctd\u003eCustom mount may be required — check GitHub for community files\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eCompatible Filaments\u003c\/h3\u003e\n\u003cp\u003eBecause the TaiChi is fully all-metal with no PTFE in the heat zone and reaches 500°C, it handles virtually every filament available:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFilament Type\u003c\/th\u003e\n\u003cth\u003eCompatible?\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePLA \/ PLA+ \/ PLA-CF\u003c\/td\u003e\n\u003ctd\u003e✅ Yes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePETG \/ PETG-CF\u003c\/td\u003e\n\u003ctd\u003e✅ Yes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eABS \/ ABS-CF \/ ASA\u003c\/td\u003e\n\u003ctd\u003e✅ Yes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPU (flexible)\u003c\/td\u003e\n\u003ctd\u003e✅ Yes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNylon (PA \/ PA-CF \/ PA-GF)\u003c\/td\u003e\n\u003ctd\u003e✅ Yes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolycarbonate (PC)\u003c\/td\u003e\n\u003ctd\u003e✅ Yes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePEEK \/ PEI (Ultem)\u003c\/td\u003e\n\u003ctd\u003e✅ Yes — up to 500°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePVA (soluble support)\u003c\/td\u003e\n\u003ctd\u003e✅ Yes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComposite \/ Abrasive (steel, tungsten, wood, boron carbide)\u003c\/td\u003e\n\u003ctd\u003e⚠️ Use hardened steel nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlow in the Dark \/ Glitter\u003c\/td\u003e\n\u003ctd\u003e⚠️ Use hardened steel nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical Specs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003e2-in-1 dual feed port (switching, not mixing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax temperature\u003c\/td\u003e\n\u003ctd\u003e500°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeatbreak\u003c\/td\u003e\n\u003ctd\u003eConical all-metal bi-metal, 0.25mm wall thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater block\u003c\/td\u003e\n\u003ctd\u003eNickel-plated copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeatsink\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport screws\u003c\/td\u003e\n\u003ctd\u003eTitanium alloy (M1.6×12)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle type\u003c\/td\u003e\n\u003ctd\u003eCopper plated or hardened steel (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament diameter\u003c\/td\u003e\n\u003ctd\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed type\u003c\/td\u003e\n\u003ctd\u003eBowden (collet-style)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHot-tighten temperature\u003c\/td\u003e\n\u003ctd\u003e285°C (required during install)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle tightening torque\u003c\/td\u003e\n\u003ctd\u003e~2.5 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColors available\u003c\/td\u003e\n\u003ctd\u003eBlue \/ Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× TaiChi Hotend assembly (your choice of Blue or Black)\u003c\/li\u003e\n\u003cli\u003e1× Silicone sock\u003c\/li\u003e\n\u003cli\u003e2× M3 mounting screws\u003c\/li\u003e\n\u003cli\u003e2× Collet clips\u003c\/li\u003e\n\u003cli\u003e1× Drivepipe (adapter tube for glass bead thermistor)\u003c\/li\u003e\n\u003cli\u003e1× Thermal paste\u003c\/li\u003e\n\u003cli\u003e1× H1.5 hex wrench\u003c\/li\u003e\n\u003cli\u003e1× 8mm open-end wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eInstallation Note — Hot Tightening Required\u003c\/h3\u003e\n\u003cp\u003e⚠️ Like most all-metal hotends, the TaiChi requires a \u003cstrong\u003ehot tighten\u003c\/strong\u003e step during install to prevent leaks. Here's how:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAssemble the hotend and heat it to \u003cstrong\u003e285°C\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eWait 1 minute for all components to equalize temperature.\u003c\/li\u003e\n\u003cli\u003eHold the heater block steady with a wrench and gently tighten the nozzle with a 7mm wrench to ~2.5 Nm — about the force of one finger pressing down on a small wrench.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThis seals the nozzle against the heatbreak and prevents molten filament from leaking between the threads. Skip this step and you'll get ooze. Do it right and you'll have a clean, leak-free hotend every time.\u003c\/p\u003e\n\u003cp\u003eFull files and documentation available on the \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/github.com\/Phaetus\/Taichi\" target=\"_blank\"\u003e official Phaetus TaiChi GitHub repository\u003c\/a\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCreality Ender or CR series users\u003c\/strong\u003e who want to add dual-material or two-color capability to their printer without buying a second extruder system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakers tired of dual toolhead calibration\u003c\/strong\u003e — one leveling pass, done. No IDEX offset tuning, no second Z offset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-temperature filament users\u003c\/strong\u003e — PEEK, PEI, PC — who need an all-metal hotend that won't melt or off-gas at the temps required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-material printers\u003c\/strong\u003e who want to pair a structural filament (e.g. CF-Nylon) with a soluble support material (PVA) through one hotend — cleanly and without leveling complexity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilders who care about print quality\u003c\/strong\u003e — the 0.25mm wall heatbreak and titanium screws give you a sharp, clean melt zone that reduces stringing and improves retraction consistency.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Blue","offer_id":52735668257062,"sku":"PHA1678","price":69.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":52735668289830,"sku":"PHA1679","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/phaetus-taichi-dual-filament-hot-end-west3d-3d-printing-supplies-phaetus-320021.webp?v=1773259447"},{"product_id":"zs-nozzles-for-creality-k1-k1-max-plated-copper-with-hardened-steel-abrasive-resistant","title":"ZS Nozzles for Creality K1 \/ K1 Max - Plated Copper with Hardened Steel Abrasive Resistant","description":"\u003ch2\u003ePlated Copper + DLC Hardened Steel Nozzle for Creality K1 and K1 Max — 500°C Rated, Abrasion Resistant, High Flow\u003c\/h2\u003e\n\n\u003cp\u003e\n  A significant nozzle upgrade for the \u003cstrong\u003eCreality K1 and K1 Max\u003c\/strong\u003e that\n  delivers two improvements simultaneously: a \u003cstrong\u003ecopper alloy body with nickel\n  plating\u003c\/strong\u003e for thermal conductivity nearly 3× higher than brass, and a\n  \u003cstrong\u003ehardened steel insert with DLC (Diamond-Like Carbon) coating\u003c\/strong\u003e for\n  wear resistance against abrasive and composite filaments. The result is a nozzle\n  that heats faster, maintains more consistent melt-zone temperatures at high speeds,\n  and lasts significantly longer against CF, GF, glow-in-the-dark, and other\n  particle-loaded filaments — all in the stock K1 nozzle form factor.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  Available in: \u003cstrong\u003e0.4mm \/ 0.6mm \/ 0.8mm.\u003c\/strong\u003e\n  Filament diameter: \u003cstrong\u003e1.75mm.\u003c\/strong\u003e\n\u003c\/p\u003e\n\n\u003cp\u003e\n  ⚠️ \u003cstrong\u003eK1 Max compatibility note:\u003c\/strong\u003e Some K1 Max units manufactured from\n  late 2024 onward ship with an \u003cstrong\u003eintegrated nozzle and heatbreak assembly\u003c\/strong\u003e\n  that is not compatible with this nozzle. If you have a newer K1 Max, verify your\n  hotend type before ordering — if integrated, search for K1C hotend\/nozzle instead.\u003cbr\u003e\n  ⚠️ \u003cstrong\u003eZ offset recalibration required\u003c\/strong\u003e after nozzle swap. Recalibrate\n  your first layer before the first print.\u003cbr\u003e\n  ⚠️ \u003cstrong\u003eHot tightening required.\u003c\/strong\u003e Always perform final nozzle tightening\n  at operating temperature to prevent leaks.\n\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Sd003a6b15c4a4428bb02a08288c14c63l.jpg\" alt=\"Plated copper DLC hardened steel nozzle for Creality K1 K1 Max — full assembly view, nickel-plated copper body with hardened steel tip\" style=\"width:100%;height:auto;\"\u003e\n\n\u003ch3\u003eCopper Alloy Body — 3× the Thermal Conductivity of Brass\u003c\/h3\u003e\n\u003cp\u003e\n  Brass is the standard nozzle material not because it's optimal, but because it's\n  cheap and easy to machine. Its thermal conductivity sits around \u003cstrong\u003e109 W\/m·K\u003c\/strong\u003e.\n  Copper alloy reaches \u003cstrong\u003e330 W\/m·K\u003c\/strong\u003e — three times higher. In practical\n  terms, this means the nozzle body transfers heat from the heater block to the\n  filament faster and more evenly across the entire melt zone. At the print speeds\n  the K1 and K1 Max are capable of (up to 600 mm\/s), filament spends less time in\n  the hot zone — and a copper nozzle compensates by delivering heat more aggressively\n  during that brief window. The outcome is either printing at \u003cstrong\u003elower temperatures\n  than brass requires\u003c\/strong\u003e for the same flow, or achieving \u003cstrong\u003ehigher volumetric\n  output at the same temperature\u003c\/strong\u003e — both of which reduce ooze, improve layer\n  adhesion, and extend nozzle life by reducing thermal stress.\n\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S2eb6a2f81ddb4ec6b67fe0b6b18d2dbfO.jpg\" alt=\"Copper alloy nozzle thermal conductivity comparison — plated copper vs brass for Creality K1 high speed printing\" style=\"width:100%;height:auto;\"\u003e\n\n\u003ch3\u003eNickel-Plated Exterior — Non-Stick Surface, Corrosion Protection\u003c\/h3\u003e\n\u003cp\u003e\n  Bare copper oxidizes and filament sticks to it readily — both problems that degrade\n  print quality and make nozzle maintenance harder over time. The \u003cstrong\u003euniform\n  nickel plating\u003c\/strong\u003e on the exterior of this nozzle solves both issues. Nickel's\n  low surface energy significantly reduces filament adhesion to the nozzle tip,\n  keeping the exterior cleaner during long print sessions and reducing the probability\n  of blobs or stringing caused by accumulated material on the nozzle face. The plating\n  also protects the copper substrate from oxidation and corrosion, maintaining\n  consistent thermal performance across the nozzle's service life.\n\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S97c89a2f0cdb42c3a8f70d101bcc6ea0v.jpg\" alt=\"Cross-section of plated copper DLC nozzle for Creality K1 — showing hardened steel insert, copper body, and nickel plating layers\" style=\"width:100%;height:auto;\"\u003e\n\n\u003ch3\u003eDLC-Coated Hardened Steel Insert — Abrasion Resistance for CF, GF and Composite Filaments\u003c\/h3\u003e\n\u003cp\u003e\n  Pure copper, despite its thermal advantages, is too soft to withstand sustained\n  contact with abrasive filaments — carbon fiber, glass fiber, and particle-loaded\n  composites grind through copper quickly. This nozzle combines the thermal advantages\n  of copper with a \u003cstrong\u003ehardened steel insert at the tip\u003c\/strong\u003e, coated with\n  \u003cstrong\u003eDLC (Diamond-Like Carbon)\u003c\/strong\u003e — the same coating technology used in\n  premium nozzles like E3D's ObXidian. The DLC surface is exceptionally hard, provides\n  natural non-stick properties, and resists the abrasive wear that destroys brass and\n  even uncoated hardened steel nozzles when printing CF-nylon, CF-PLA, GF-PA, glitter,\n  glow-in-the-dark, or metal-filled filaments over sustained sessions.\n\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S8ef2e2e7599f4ce99fd6c0db719b99e3m.jpg\" alt=\"DLC diamond-like carbon coated hardened steel insert in plated copper nozzle — wear resistance for carbon fiber and abrasive filaments on K1\" style=\"width:100%;height:auto;\"\u003e\n\n\u003ch3\u003e500°C Temperature Rating — Print Engineering Materials on the K1\u003c\/h3\u003e\n\u003cp\u003e\n  The copper alloy body is rated to \u003cstrong\u003e500°C\u003c\/strong\u003e — well beyond what most\n  engineering-grade materials require. PC sits around 260–280°C, PA-CF at 260–290°C,\n  and even PEEK typically tops out at 380–400°C. The 500°C ceiling means this nozzle\n  is not the limiting factor in your material range — your hotend's heater cartridge\n  and thermistor will define your actual temperature ceiling, not the nozzle itself.\n  For K1 and K1 Max owners pushing into ABS, ASA, PA, PC, or fiber-filled variants\n  of any of these, this nozzle has the thermal headroom to keep up.\n\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S5d06216c0cba43dca2509446b64f9d29v.jpg\" alt=\"Plated copper K1 nozzle 500°C temperature rating — compatible with ABS ASA PA PC PEEK and engineering filaments on Creality K1 Max\" style=\"width:100%;height:auto;\"\u003e\n\n\u003ch3\u003eSmooth Inner Wall — Ra\u0026lt;0.4 Surface Finish Reduces Clogs\u003c\/h3\u003e\n\u003cp\u003e\n  The inner channel of this nozzle is precision-machined to a \u003cstrong\u003esurface\n  roughness of Ra\u0026lt;0.4\u003c\/strong\u003e — a smooth finish that reduces friction as filament\n  moves through the melt zone. In practical terms: fewer partial blockages from\n  rough channel walls catching filament particulates, more consistent flow under\n  high-speed extrusion, and cleaner filament transitions during color or material\n  changes. The smooth bore is particularly relevant when printing flexible TPU or\n  high-viscosity materials like PC that are sensitive to any flow restriction.\n\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S287ecba582144edab6ecadfd67b26d06a.jpg\" alt=\"Smooth inner bore Ra less than 0.4 surface finish — plated copper K1 nozzle detail view, reduces clogging\" style=\"width:100%;height:auto;\"\u003e\n\n\u003ch3\u003eSize Identification — Markings on the Hex Head Flats\u003c\/h3\u003e\n\u003cp\u003e\n  Each nozzle has its orifice size \u003cstrong\u003emarked on the flats of the hex head\u003c\/strong\u003e\n  — no color codes or tiny stamped numbers on the tip. If you run multiple sizes\n  for different jobs, identification is immediate without needing to measure or\n  guess under magnification.\n\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S4f0d5adcfacd4b75929db35c7d0fafa3O.jpg\" alt=\"Nozzle size identification markings on hex head flats — plated copper K1 nozzle 0.4mm 0.6mm 0.8mm\" style=\"width:100%;height:auto;\"\u003e\n\n\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S373828423e0c4d3cbd7cdfd5b850f58dj.jpg\" alt=\"Nozzle identification table — markings guide for plated copper DLC nozzle Creality K1 K1 Max sizes\" style=\"width:100%;height:auto;\"\u003e\n\n\u003ch3\u003eVolumetric Flow Comparison\u003c\/h3\u003e\n\u003cp\u003e\n  Flow rate testing was conducted on a \u003cstrong\u003eDragon HF hotend\u003c\/strong\u003e with a\n  \u003cstrong\u003e0.6mm nozzle\u003c\/strong\u003e printing \u003cstrong\u003ePLA at 220°C\u003c\/strong\u003e using\n  PrusaSlicer. Results demonstrate measurable volumetric flow improvement over\n  standard brass nozzles at equivalent temperatures — consistent with the copper\n  body's higher thermal conductivity delivering more heat to the filament\n  in the same melt-zone dwell time.\n\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S03c11ad1b582475e852146142bfe1434Q.jpg\" alt=\"Volumetric flow rate comparison chart — plated copper DLC nozzle vs brass on Dragon HF hotend PLA 220°C 0.6mm\" style=\"width:100%;height:auto;\"\u003e\n\n\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Sa8a1f0ac76d647d0a343bf7fe479e49e5.jpg\" alt=\"Extrusion test results plated copper nozzle K1 — flow rate performance at various speeds\" style=\"width:100%;height:auto;\"\u003e\n\n\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S4e785acfe31d4b1aae964fd71cd14c3fu.jpg\" alt=\"Plated copper nozzle dimensional specs for Creality K1 K1 Max — size reference chart\" style=\"width:100%;height:auto;\"\u003e\n\n\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S587281db89eb4d9b85343aa5fcd4a475p.jpg\" alt=\"Plated copper DLC hardened steel nozzle Creality K1 — installation and compatibility details\" style=\"width:100%;height:auto;\"\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible printers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCreality K1, K1 Max (2023 — verify hotend type on newer K1 Max units)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable sizes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4mm \/ 0.6mm \/ 0.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilament diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBody material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCopper alloy with uniform nickel plating\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTip insert\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHardened steel with DLC (Diamond-Like Carbon) coating\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThermal conductivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~330 W\/m·K (copper alloy — vs ~109 W\/m·K for brass)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500°C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner wall finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRa \u0026lt; 0.4 (precision machined smooth bore)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize identification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMarked on hex head flats\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHot tightening\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired — tighten at operating temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFilament Compatibility\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e✅ \u003cstrong\u003eStandard\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, ABS, ASA, TPU, TPE, PP, PC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e✅ \u003cstrong\u003eAbrasive \/ composite\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003ePLA-CF, PETG-CF, PA-CF, PA-GF, ABS-CF, PET-CF, steel-filled, wood-filled, glow-in-the-dark, glitter\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e✅ \u003cstrong\u003eHigh temperature\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003ePEEK, PEI (ULTEM), PSU, PPSU, PEKK (heater and thermistor dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhen Do You Need This?\u003c\/h3\u003e\n\u003cp\u003e\n  If you're running a K1 or K1 Max and printing any abrasive or composite filament\n  on the stock brass nozzle, you're watching it wear out faster than it should while\n  leaving thermal performance on the table. This nozzle fixes both problems at once\n  — the DLC-coated steel insert handles the abrasion, and the copper body extracts\n  significantly more flow from your existing hotend. It's also the correct move if\n  you've been holding back on engineering materials because your current nozzle\n  can't sustain the temperatures or wear load. At this price point it's one of the\n  highest value-per-dollar upgrades available for the K1 platform.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  Browse our full nozzle selection at\n  \u003ca href=\"\/collections\/3d-printer-nozzles\"\u003e3D Printer Nozzles\u003c\/a\u003e, or explore all\n  K1-compatible upgrades at\n  \u003ca href=\"\/collections\/3d-printer-upgrades\"\u003e3D Printer Upgrades\u003c\/a\u003e.\n\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735670714662,"sku":"TRI2028","price":17.99,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735670747430,"sku":"TRI2029","price":17.99,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735670780198,"sku":"TRI2030","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/zs-nozzles-for-creality-k1-k1-max-plated-copper-with-hardened-steel-abrasive-resistant-west3d-3d-printing-supplies-trianglelab-6760006.jpg?v=1773259449"},{"product_id":"e3d-revo-hta-hf-high-flow-high-temperature-abrasive-nozzles-for-revo-hotend-hf-hta","title":"E3D Revo HTA-HF High-Flow High-Temperature Abrasive Nozzles for Revo Hotend  (HF HTA)","description":"\u003ch2\u003eE3D Revo HF HT-A Nozzle — High Flow, High Temperature, Abrasion Resistant, 500°C, RapidChange Revo Ecosystem\u003c\/h2\u003e\n\n\u003cp\u003e\n  The \u003cstrong\u003eE3D Revo HF HT-A\u003c\/strong\u003e (High Flow, High Temperature, Abrasion-resistant) is\n  E3D's most capable Revo nozzle for demanding engineering materials. It combines three\n  properties that are normally traded off against each other —\n  \u003cstrong\u003eultra-high temperature resistance up to 500°C\u003c\/strong\u003e,\n  \u003cstrong\u003ehigh-flow internal geometry\u003c\/strong\u003e, and\n  \u003cstrong\u003eChromium Nitride abrasion resistance\u003c\/strong\u003e — in the standard Revo RapidChange\n  form factor. Drop-in on any Revo hotend. Tool-free swap. No hot tightening. Grey body\n  with engraved size for instant identification.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  Available in: \u003cstrong\u003e0.4mm \/ 0.6mm \/ 0.8mm \/ 1.0mm \/ 1.2mm \/ 1.4mm.\u003c\/strong\u003e\n\u003c\/p\u003e\n\n\u003cp\u003e\n  ⚠️ \u003cstrong\u003e500°C requires a Revo High Temperature Hotside kit.\u003c\/strong\u003e With standard\n  40W or 60W HeaterCores, these nozzles are temperature-limited to 300°C. The nozzle\n  itself is rated to 500°C — your HeaterCore determines the actual ceiling.\n  \u003ca href=\"https:\/\/west3d.com\/products\/e3d-revo-hot-side-heater-core-and-nozzle-kit-starter-high-flow-genius-400-genius-metal\"\u003e\n    See Revo High Temperature Hotside kits here.\n  \u003c\/a\u003e\u003cbr\u003e\n  ⚠️ \u003cstrong\u003eNot compatible with V6-style HeaterBlocks.\u003c\/strong\u003e HT-A nozzles are\n  Revo RapidChange system only — they will not thread into a standard V6 heatblock.\u003cbr\u003e\n  ⚠️ \u003cstrong\u003eZ offset recalibration required\u003c\/strong\u003e when changing nozzle sizes or\n  switching from a standard to HF nozzle.\n\u003c\/p\u003e\n\n\u003ch3\u003eChromium Nitride Coating — The Difference Between HT-A and Standard ObXidian\u003c\/h3\u003e\n\u003cp\u003e\n  Most high-performance Revo nozzles — including ObXidian — use a Diamond-Like Carbon\n  (E3DLC) coating. The HT-A uses \u003cstrong\u003eChromium Nitride (CrN)\u003c\/strong\u003e instead, which\n  is specifically engineered for sustained operation at temperatures that would degrade\n  DLC coatings. CrN delivers three simultaneous benefits on a single surface treatment:\n  \u003cstrong\u003eabrasion resistance\u003c\/strong\u003e against fiber-filled and particle-loaded filaments,\n  \u003cstrong\u003ecorrosion resistance\u003c\/strong\u003e for chemically aggressive materials, and\n  \u003cstrong\u003enon-stick properties\u003c\/strong\u003e that reduce filament build-up on the nozzle tip.\n  The result is a grey-colored nozzle visually distinct from other Revo variants — you\n  won't confuse an HT-A with a brass or ObXidian nozzle at a glance.\n\u003c\/p\u003e\n\n\u003ch3\u003eTri-Metal Construction — Hardened Steel Tip, Copper Carrier, Copper Spreader\u003c\/h3\u003e\n\u003cp\u003e\n  The HT-A's construction follows the same architecture as ObXidian but optimized for\n  high-temperature use. A \u003cstrong\u003ehardened steel tip\u003c\/strong\u003e forms the wear surface at\n  the orifice — the point of highest abrasive contact with the filament. Behind it, a\n  \u003cstrong\u003ecopper carrier and copper spreader segment\u003c\/strong\u003e maximize thermal conductivity\n  between the HeaterCore and the tip, ensuring consistent heat delivery at high temperatures\n  where thermal lag becomes a real problem. Copper's thermal conductivity is significantly\n  higher than steel — this tri-layer approach gives you the hardness of steel where it\n  matters and the heat transfer of copper everywhere else.\n\u003c\/p\u003e\n\n\u003ch3\u003eHigh-Flow Internal Geometry — Same Form Factor, Higher Throughput\u003c\/h3\u003e\n\u003cp\u003e\n  Unlike E3D's legacy high-flow solutions (Volcano, SuperVolcano), which required longer\n  heatblocks and different mounts, the HF HT-A achieves increased volumetric flow by\n  modifying the \u003cstrong\u003einternal channel geometry\u003c\/strong\u003e — increasing heat-transfer\n  surface area inside the nozzle without changing the external dimensions. Same Revo\n  form factor, same mount, same fan duct, same toolhead clearances. You gain higher\n  flow throughput for fast printing of high-temperature engineering materials with zero\n  hardware reconfiguration.\n\u003c\/p\u003e\n\n\u003ch3\u003eSix Nozzle Sizes — Including Large Bore for High-Flow Draft and Industrial Applications\u003c\/h3\u003e\n\u003cp\u003e\n  Standard Revo nozzle ranges stop at 0.8mm. The HF HT-A extends to\n  \u003cstrong\u003e1.0mm, 1.2mm, and 1.4mm\u003c\/strong\u003e — making it the correct choice for\n  draft-quality functional parts at maximum speed, thick-wall structural printing,\n  and industrial-grade composite filaments where large particles require large orifices\n  to prevent jams. The full size range with abrasion resistance and 500°C capability\n  in a single nozzle family covers essentially every high-performance printing use case:\n\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e0.4mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDetail and precision — CF\/GF composites, high-temp engineering grades\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e0.6mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBalanced speed\/detail — standard engineering material workhorse size\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e0.8mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-speed printing — thick walls, structural parts, draft quality\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1.0mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUltra-high flow — large functional parts, heavily filled composites\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1.2mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIndustrial draft — maximum layer height, thick-section parts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1.4mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMaximum bore — ultra-coarse printing, large particle composite filaments\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eRevo RapidChange — Nozzle + HeatBreak as One Unit, No Hot Tightening Ever\u003c\/h3\u003e\n\u003cp\u003e\n  Every Revo nozzle is a \u003cstrong\u003epre-assembled nozzle and HeatBreak in a single sealed\n  unit\u003c\/strong\u003e. This design eliminates the fundamental failure mode of conventional\n  hotends: the nozzle-to-heatblock joint that requires hot tightening to seal and\n  inevitably leaks when under-torqued, over-torqued, or thermally cycled repeatedly.\n  With HT-A, you twist it in at room temperature with your fingers — the geometry of\n  the assembly creates the seal, not torque. No leaks. No burns. No failed assemblies.\n  When you need to swap sizes or replace a clogged nozzle, it takes 30 seconds and\n  zero tools.\n\u003c\/p\u003e\n\n\u003ch3\u003eRapid Identification — Grey Body, Engraved Size\u003c\/h3\u003e\n\u003cp\u003e\n  HT-A nozzles are \u003cstrong\u003egrey in color\u003c\/strong\u003e, visually distinguishing them from\n  Revo brass (gold), ObXidian (black), and standard HT (also grey but without the HF\n  geometry). Each nozzle has its orifice diameter \u003cstrong\u003eengraved directly on the\n  body\u003c\/strong\u003e — no color codes, no tiny stamped numbers, no guessing.\n\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eE3D\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRevo HF HT-A (High Flow, High Temperature, Abrasion-resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle system\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eE3D RapidChange Revo™ — tool-free, room temperature swap\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHardened steel tip + copper carrier + copper spreader\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eChromium Nitride (CrN)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500°C (nozzle rated) — requires Revo HT Hotside kit to reach 500°C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax temp with standard HeaterCore\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300°C (40W or 60W HeaterCore)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable sizes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4mm \/ 0.6mm \/ 0.8mm \/ 1.0mm \/ 1.2mm \/ 1.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlow type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh Flow — custom internal geometry, increased surface area\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard Revo — same as all Revo nozzles, drop-in compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize identification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEngraved on nozzle body\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHot tightening required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNever — Revo RapidChange system\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eV6 HeaterBlock compatible\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo — Revo system only\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e✅\u003c\/td\u003e\n\u003ctd\u003e1× E3D Revo HF HT-A nozzle (size as selected)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's NOT Included\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e❌\u003c\/td\u003e\n\u003ctd\u003eRevo hotend or HeaterCore — sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e❌\u003c\/td\u003e\n\u003ctd\u003eRevo HT Hotside kit — required to reach temperatures above 300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e❌\u003c\/td\u003e\n\u003ctd\u003eOther nozzle sizes — each size sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eHT-A vs ObXidian — Which Revo Nozzle Do You Need?\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003eObXidian HF\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003cstrong\u003eHF HT-A\u003c\/strong\u003e\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eMax temperature\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e300°C\u003c\/td\u003e\n      \u003ctd\u003e500°C (with HT Hotside)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eCoating\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eE3DLC (Diamond-Like Carbon)\u003c\/td\u003e\n      \u003ctd\u003eChromium Nitride\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eAbrasion resistance\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eExceptional\u003c\/td\u003e\n      \u003ctd\u003eExceptional\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eHigh flow\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eYes\u003c\/td\u003e\n      \u003ctd\u003eYes\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eAvailable sizes\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003e0.4 \/ 0.6 \/ 0.8mm\u003c\/td\u003e\n      \u003ctd\u003e0.4 \/ 0.6 \/ 0.8 \/ 1.0 \/ 1.2 \/ 1.4mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eBest for\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eCF\/GF composites up to 300°C\u003c\/td\u003e\n      \u003ctd\u003ePEEK, PEI, high-temp composites, large bore printing\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhen Do You Need This?\u003c\/h3\u003e\n\u003cp\u003e\n  The HF HT-A is the correct nozzle when your material requirements exceed what ObXidian\n  can handle — specifically when you need to print \u003cstrong\u003eabove 300°C\u003c\/strong\u003e (PEEK, PEI\/ULTEM,\n  high-performance Nylon grades, specialty composites) or when you need \u003cstrong\u003enozzle sizes\n  above 0.8mm\u003c\/strong\u003e with abrasion resistance for heavily loaded composite filaments.\n  If you're printing CF-nylon at 280°C and an 0.4mm ObXidian covers your needs, you don't\n  need the HT-A. If you're running PEEK at 400°C or PA-CF through a 1.0mm orifice for\n  structural parts at speed, the HT-A is the only Revo nozzle built for it.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  ⚠️ \u003cstrong\u003eCalifornia Prop 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals\n  including Mineral Oils, Lead, and Nickel, which are known to the State of California to\n  cause cancer, birth defects, or other reproductive harm.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  Browse our full nozzle selection at\n  \u003ca href=\"\/collections\/3d-printer-nozzles\"\u003e3D Printer Nozzles\u003c\/a\u003e, or explore all\n  performance upgrades at\n  \u003ca href=\"\/collections\/3d-printer-upgrades\"\u003e3D Printer Upgrades\u003c\/a\u003e.\n\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735672058150,"sku":"RC-NOZZLE-HF-HTA-0400-AS-SPK","price":69.99,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735672090918,"sku":"E3D1929","price":69.99,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735672123686,"sku":"E3D1930","price":69.99,"currency_code":"USD","in_stock":true},{"title":"1mm","offer_id":52735672156454,"sku":"E3D1931","price":69.99,"currency_code":"USD","in_stock":true},{"title":"1.2mm","offer_id":52735672189222,"sku":"E3D1932","price":69.99,"currency_code":"USD","in_stock":true},{"title":"1.4mm","offer_id":52735672221990,"sku":"E3D1933","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/e3d-revo-hta-hf-high-flow-high-temperature-abrasive-nozzles-for-revo-hotend-hf-hta-west3d-3d-printing-supplies-e3d-603857.webp?v=1773259450"},{"product_id":"genuine-original-prusa-xl-mk4-coreone-high-flow-obxidian-abrasive-resistant-nozzles-by-e3d","title":"Genuine Original Prusa XL \/ MK4 \/ CoreOne High-Flow Obxidian Abrasive Resistant Nozzles by E3D","description":"\u003ch2\u003eE3D ObXidian High Flow Nozzle for Prusa Nextruder — MK4, MK4S, MK3.9, XL, CORE One — Tool Steel + E3DLC™ Coating, Drop-In Upgrade\u003c\/h2\u003e\n\n\u003cp\u003e\n  The \u003cstrong\u003eE3D ObXidian High Flow Nozzle\u003c\/strong\u003e is the definitive nozzle upgrade for\n  Prusa Nextruder-based printers. Co-developed with Prusa, it combines two capabilities that\n  are usually a trade-off: \u003cstrong\u003eultra-high wear resistance for abrasive filaments\u003c\/strong\u003e\n  and \u003cstrong\u003eincreased volumetric flow for faster printing\u003c\/strong\u003e — in the exact same\n  external form factor as a standard Nextruder nozzle. Drop-in replacement, no hardware\n  modifications, no new mounts, no fan duct changes. Just swap and print.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  Compatible with: \u003cstrong\u003ePrusa MK4, MK4S, MK3.9, MK3.9S, XL, CORE One, CORE One L.\u003c\/strong\u003e\n  Available in \u003cstrong\u003e0.4mm, 0.6mm, and 0.8mm\u003c\/strong\u003e diameters.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  ⚠️ \u003cstrong\u003eCompatible with Prusa Nextruder only.\u003c\/strong\u003e Not compatible with older Prusa\n  extruders (MK3S+, MK2, MMU setups with non-Nextruder hotends).\u003cbr\u003e\n  ⚠️ \u003cstrong\u003eZ offset adjustment may be required\u003c\/strong\u003e when swapping between nozzle sizes\n  or from a standard to High Flow nozzle. Recalibrate first layer after any nozzle change.\u003cbr\u003e\n  ⚠️ \u003cstrong\u003eMax temperature: 300°C.\u003c\/strong\u003e This is not the ObXidian 500 variant. For\n  materials requiring above 300°C, see the ObXidian 500 series.\u003cbr\u003e\n  ⚠️ \u003cstrong\u003eSome ultra-aggressive fillers will wear even ObXidian.\u003c\/strong\u003e See the\n  compatibility note in the materials section below.\n\u003c\/p\u003e\n\n\u003ch3\u003eAll-Metal Filament Guide — No PTFE Anywhere in the Nextruder Path\u003c\/h3\u003e\n\u003cp\u003e\n  Standard Nextruder nozzles already eliminated PTFE from the hot zone, but the all-metal\n  filament guide in these E3D ObXidian nozzles takes that further — the \u003cstrong\u003eentire\n  filament path through the Nextruder is metal from entry to tip\u003c\/strong\u003e. No PTFE liner,\n  no tube degradation at elevated temperatures, no off-gassing during high-temp material\n  sessions. This improves long-term print reliability at sustained temperatures and makes\n  nozzle swaps significantly faster since there's no PTFE tube to re-seat or worry about\n  during the change.\n\u003c\/p\u003e\n\n\u003ch3\u003eHigh-Flow Internal Geometry — More Speed Without a Bigger Nozzle\u003c\/h3\u003e\n\u003cp\u003e\n  The flow bottleneck in most nozzles isn't the orifice — it's heat transfer. If filament\n  passes through the melt zone faster than it can fully liquefy, you get under-extrusion at\n  speed even if your hotend temperature reads correctly. E3D's High Flow ObXidian addresses\n  this at the geometry level: a \u003cstrong\u003ecustom internal profile increases the surface area\n  inside the nozzle\u003c\/strong\u003e, giving filament more contact time with the heated metal as it\n  moves toward the tip. The result is higher achievable volumetric flow from the same\n  hotend — letting your Prusa MK4 or XL run faster without sacrificing extrusion consistency.\n  Unlike E3D's older high-flow approaches (Volcano, SuperVolcano), this achieves higher\n  throughput with \u003cstrong\u003eno change to nozzle external dimensions\u003c\/strong\u003e — your existing\n  mount and fan duct setups remain untouched.\n\u003c\/p\u003e\n\n\u003ch3\u003eObXidian™ — Tool Steel Insert + E3DLC™ Coating\u003c\/h3\u003e\n\u003cp\u003e\n  Standard brass nozzles wear measurably when printing glass fiber, carbon fiber, or\n  glow-in-the-dark filaments. Hardened steel nozzles do better, but still degrade over\n  sustained abrasive use. ObXidian uses a fundamentally different approach: a\n  \u003cstrong\u003etool steel insert\u003c\/strong\u003e combined with \u003cstrong\u003eE3DLC™ (Diamond-Like Carbon)\n  coating\u003c\/strong\u003e — a proprietary surface treatment that delivers wear resistance orders\n  of magnitude higher than any other E3D nozzle, and significantly beyond generic hardened\n  steel options. The E3DLC coating also has inherent \u003cstrong\u003enon-stick properties\u003c\/strong\u003e,\n  which means considerably less filament build-up on the nozzle exterior — cleaner tip,\n  fewer print crashes from stringing buildup, and less time cleaning between material changes.\n\u003c\/p\u003e\n\n\u003ch3\u003eMaterial Compatibility — What ObXidian Handles and What It Doesn't\u003c\/h3\u003e\n\u003cp\u003e\n  ObXidian is the correct nozzle for the vast majority of abrasive filaments:\n\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e✅ \u003cstrong\u003eRecommended\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003ePLA-CF, PETG-CF, ABS-CF, ASA, standard Nylon (PA6, PA12), glow-in-the-dark, filled composites with standard particle size\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e✅ \u003cstrong\u003eSupported\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, ABS, ASA, TPU, PC, PP — all standard non-abrasive filaments\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e⚠️ \u003cstrong\u003eUse with caution\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003ePolymaker PolyMide PA612-CF, PA6-CF, PA6-GF, PA12-CF and other ultra-aggressive fiber-filled engineering grades — these can cause wear even on ObXidian. Check filament manufacturer's recommended minimum nozzle size before printing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e⚠️ \u003cstrong\u003eParticle size warning\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003eSome filled materials have particles close to or larger than 0.4mm — attempting to print these through a 0.4mm nozzle significantly increases jam risk. Use 0.6mm or larger for heavily filled composites\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\n  For the most aggressive abrasive filaments, E3D's \u003cstrong\u003eObXidian 500\u003c\/strong\u003e series\n  (rated to 500°C, at least 5× more wear resistant) is the appropriate step up.\n\u003c\/p\u003e\n\n\u003ch3\u003eEasy Identification — Size Engraved on Every Nozzle\u003c\/h3\u003e\n\u003cp\u003e\n  Each nozzle has its orifice diameter \u003cstrong\u003elaser-engraved directly into the body\u003c\/strong\u003e.\n  If you run multiple nozzle sizes — 0.4mm for detail, 0.6mm for speed, 0.8mm for draft\n  printing — you'll never accidentally install the wrong one or dig through unlabeled nozzle\n  collections trying to identify a size by eye.\n\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eE3D\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eObXidian High Flow — Prusa Nextruder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible printers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrusa MK4, MK4S, MK3.9, MK3.9S, XL, CORE One, CORE One L\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtruder compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrusa Nextruder only\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable sizes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4mm \/ 0.6mm \/ 0.8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilament diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTool steel insert + E3DLC™ Diamond-Like Carbon coating\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilament path\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll-metal — no PTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlow type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh Flow — custom internal geometry for increased volumetric throughput\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIdentical to standard ObXidian Nextruder nozzles — drop-in, no mount changes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNon-stick coating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes — E3DLC™ reduces filament build-up\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize identification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEngraved on nozzle body\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.52g\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHot tightening required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo — Nextruder system, standard swap procedure applies\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e✅\u003c\/td\u003e\n\u003ctd\u003e1× E3D ObXidian High Flow Nextruder Nozzle (size as selected)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's NOT Included\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e❌\u003c\/td\u003e\n\u003ctd\u003eNextruder hotend assembly — this is a nozzle only\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e❌\u003c\/td\u003e\n\u003ctd\u003eOther nozzle sizes — each size sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhen Do You Need This?\u003c\/h3\u003e\n\u003cp\u003e\n  This is the right nozzle if you're running a Prusa MK4, MK4S, or XL and regularly printing\n  with carbon fiber or glass fiber-filled materials — or if you want to push your print speeds\n  higher without upgrading your hotend. It's also the correct choice if you've been burning\n  through brass nozzles on abrasive filaments and want a nozzle that lasts through sustained\n  production use. If you print a mix of standard and abrasive materials and want one nozzle\n  that handles both without compromise, ObXidian High Flow is the answer.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  ⚠️ \u003cstrong\u003eCalifornia Prop 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals\n  including Mineral Oils, Lead, and Nickel, which are known to the State of California to\n  cause cancer, birth defects, or other reproductive harm.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  Browse our full nozzle selection at\n  \u003ca href=\"\/collections\/3d-printer-nozzles\"\u003e3D Printer Nozzles\u003c\/a\u003e, or explore all\n  performance upgrades at\n  \u003ca href=\"\/collections\/3d-printer-upgrades\"\u003e3D Printer Upgrades\u003c\/a\u003e.\n\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":52735672320294,"sku":"PRUSA-MK4-NOZ-HF-OBX-AS-0400","price":64.99,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":52735672353062,"sku":"RC-NOZZLE-HF-OBX-0600-AS-SPK","price":64.99,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":52735672385830,"sku":"E3D2344.8M","price":64.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/genuine-original-prusa-xl-and-mk4-high-flow-obxidian-abrasive-resistant-nozzles-by-e3d-west3d-3d-printing-supplies-e3d-672124.png?v=1773259451"},{"product_id":"alpha-pcd-3d-printer-nozzle-polycrystalline-diamond-v6-prusa-k1c-k2p-qidi-plus4","title":"ALPHA PCD 3D Printer Nozzle – Polycrystalline Diamond (V6 \/ Prusa \/ K1C \/ K2P \/ Qidi Plus4)","description":"\u003cp\u003eHigh-speed and production 3D printing with abrasive or engineering filaments demands nozzles that resist wear and maintain consistent flow. Printers like the Prusa MK4, V6 hotend users, and Qidi Plus4 owners face frequent clogging and nozzle degradation without specialized hardware.\u003c\/p\u003e\u003cp\u003eThe ALPHA PCD 3D Printer Nozzle features an encapsulated polycrystalline diamond tip combined with a nickel-plated copper body, engineered for extreme durability and thermal performance. Compatible with V6, Prusa, K1C, K2P, and Qidi Plus4 form factors, this Fabreeko nozzle excels in high-speed printing and abrasive filament use, delivering superior heat transfer and minimal friction to reduce clogs and improve extrusion consistency.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Material\u003c\/td\u003e\n\u003ctd\u003eEncapsulated Polycrystalline Diamond tip + Nickel-plated Copper body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Compatibility\u003c\/td\u003e\n\u003ctd\u003eAll standard and highly abrasive filaments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Temperature\u003c\/td\u003e\n\u003ctd\u003e500°C+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Form Factors\u003c\/td\u003e\n\u003ctd\u003eV6, Prusa, K1C, K2P, Qidi Plus4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIdeal Use Cases\u003c\/td\u003e\n\u003ctd\u003eHigh-speed printing, production workloads, abrasive filament printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrusa MK4 and V6 hotend users experience longer nozzle life when printing abrasive materials like carbon fiber and metal-filled filaments.\u003c\/li\u003e\n\u003cli\u003eQidi Plus4 owners benefit from improved thermal conductivity, enabling stable extrusion at high speeds and temperatures.\u003c\/li\u003e\n\u003cli\u003eReduces clogging and filament buildup thanks to ultra-low friction PCD surface, enhancing print reliability for production runs.\u003c\/li\u003e\n\u003cli\u003eSupports high-temperature engineering filaments up to 500°C+, expanding material options for advanced users.\u003c\/li\u003e\n\u003cli\u003eIdeal for K1C and K2P CoreXY builds requiring consistent flow and durability under demanding print conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrusa MK4 users upgrading to a wear-resistant nozzle for abrasive filament printing\u003c\/li\u003e\n\u003cli\u003eV6 hotend owners seeking improved heat transfer and clog resistance\u003c\/li\u003e\n\u003cli\u003eQidi Plus4 printers running high-speed or high-temp production prints\u003c\/li\u003e\n\u003cli\u003eK1C and K2P CoreXY builders needing durable nozzles for engineering materials\u003c\/li\u003e\n\u003cli\u003eFabreeko ALPHA nozzle enthusiasts demanding premium performance in demanding environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaximize the ALPHA PCD nozzle's durability and thermal advantages by pairing it with abrasive and high-temp filaments designed for demanding applications.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/carbon-fiber-filament\"\u003eCarbon Fiber Filament\u003c\/a\u003e — ideal for demanding mechanical parts requiring wear resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/nylon-filament\"\u003eNylon Filament\u003c\/a\u003e — benefits from the nozzle's high-temp capability and smooth flow\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — takes advantage of enhanced heat transfer for stable extrusion\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabreeko","offers":[{"title":"V6 \/ 0.4","offer_id":52904597225766,"sku":"Av6-04","price":74.99,"currency_code":"USD","in_stock":true},{"title":"V6 \/ 0.5","offer_id":52904597258534,"sku":"Av6-05","price":74.99,"currency_code":"USD","in_stock":true},{"title":"V6 \/ 0.6","offer_id":52904597291302,"sku":"Av6-06","price":74.99,"currency_code":"USD","in_stock":true},{"title":"V6 \/ 0.8","offer_id":52904597324070,"sku":"Av6-08","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Qidi Plus 4 \/ 0.4","offer_id":52904597356838,"sku":"Ap4-04","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Qidi Plus 4 \/ 0.5","offer_id":52904597389606,"sku":"Ap4-05","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Qidi Plus 4 \/ 0.6","offer_id":52904597422374,"sku":"Ap4-06","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Qidi Plus 4 \/ 0.8","offer_id":52904597455142,"sku":"Ap4-08","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Qidi Q2 \/ 0.4","offer_id":53086110155046,"sku":"sku-48412490137855","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Qidi Q2 \/ 0.5","offer_id":53086110187814,"sku":"sku-48412490170623","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Qidi Q2 \/ 0.6","offer_id":53086110220582,"sku":"sku-48412490203391","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Qidi Q2 \/ 0.8","offer_id":53086110253350,"sku":"sku-48412490236159","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Prusa XL\/Mk4\/Core One (Nextruder) \/ 0.4","offer_id":52904597487910,"sku":"Aprs-04","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Prusa XL\/Mk4\/Core One (Nextruder) \/ 0.5","offer_id":52904597520678,"sku":"Aprs-02","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Prusa XL\/Mk4\/Core One (Nextruder) \/ 0.6","offer_id":52904597553446,"sku":"Aprs-06","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Prusa XL\/Mk4\/Core One (Nextruder) \/ 0.8","offer_id":52904597586214,"sku":"Aprs-08","price":74.99,"currency_code":"USD","in_stock":true},{"title":"K1C Unicorn \/ 0.4","offer_id":52904597618982,"sku":"Ak1c-04","price":74.99,"currency_code":"USD","in_stock":true},{"title":"K1C Unicorn \/ 0.5","offer_id":52904597651750,"sku":"Ak1c-05","price":74.99,"currency_code":"USD","in_stock":true},{"title":"K1C Unicorn \/ 0.6","offer_id":52904597684518,"sku":"Ak1c-06","price":74.99,"currency_code":"USD","in_stock":false},{"title":"K1C Unicorn \/ 0.8","offer_id":52904597717286,"sku":"Ak1c-08","price":74.99,"currency_code":"USD","in_stock":false},{"title":"K2P Unicorn \/ 0.4","offer_id":52904597750054,"sku":"Ak2P-04","price":74.99,"currency_code":"USD","in_stock":true},{"title":"K2P Unicorn \/ 0.5","offer_id":52904597782822,"sku":"Ak2P-05","price":74.99,"currency_code":"USD","in_stock":true},{"title":"K2P Unicorn \/ 0.6","offer_id":52904597815590,"sku":"Ak2P-06","price":74.99,"currency_code":"USD","in_stock":false},{"title":"K2P Unicorn \/ 0.8","offer_id":52904597848358,"sku":"Ak2P-08","price":74.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/SocialMedia-Facebook.jpg?v=1774982634"}],"url":"https:\/\/supplies3d.shop\/collections\/3d-printer-nozzles.oembed","provider":"SUPPLIES3D","version":"1.0","type":"link"}