{"title":"3D Printer Enclosures","description":"\u003ch2\u003eUnlock ABS, ASA, Nylon \u0026amp; PC Printing\u003c\/h2\u003e\n\u003cp\u003eAn enclosure is not an optional accessory for printing engineering-grade materials — it is a requirement. ABS, ASA, Nylon, and PC all need a stable ambient temperature of 40–50°C to prevent warping, layer delamination, and cracking during printing. An open-frame printer cannot maintain this temperature regardless of bed temperature settings or adhesion methods. A proper enclosure traps the heat generated by the heated bed and hotend, creating the stable thermal environment these materials demand. If you have ever failed repeatedly at ABS or ASA printing, an enclosure resolves the problem at its root cause.\u003c\/p\u003e\n\u003ch3\u003eHow Enclosures Work\u003c\/h3\u003e\n\u003cp\u003eEnclosures work passively — they do not require a separate heater in most setups. The heat generated by a 100°C bed and a 240°C hotend is sufficient to bring the enclosure's internal temperature to 40–50°C within the first few minutes of a print. The enclosure simply prevents that heat from dissipating into the room. This stable ambient temperature eliminates the thermal gradient between the hot base layers and the cooler upper layers that causes warping and delamination in temperature-sensitive materials.\u003c\/p\u003e\n\u003ch3\u003eBenefits Beyond Material Compatibility\u003c\/h3\u003e\n\u003cp\u003eEven for PLA and PETG users, an enclosure delivers meaningful benefits. Print noise is reduced significantly — the enclosure panels absorb and dampen stepper motor and fan noise, making the printer far less intrusive in home and office environments. Dust and debris are kept off the print surface and motion components, reducing maintenance frequency. And for households with children or pets, an enclosure adds a meaningful layer of safety around hot components and moving parts.\u003c\/p\u003e\n\u003ch3\u003eActive vs. Passive Enclosures\u003c\/h3\u003e\n\u003cp\u003eMost enclosures are passive — insulated panels that retain heat without any active heating element. For standard ABS and ASA printing, passive enclosures are fully sufficient. Active enclosures add a dedicated heater to reach and maintain precise internal temperatures, which becomes relevant for Nylon PA12, PC, and high-performance composites that benefit from 50°C+ ambient temperatures. For most users, a quality passive enclosure is the right starting point.\u003c\/p\u003e\n\u003ch3\u003eVentilation Considerations\u003c\/h3\u003e\n\u003cp\u003eABS and ASA produce fumes during printing that are best not accumulated in a closed space. A ventilated enclosure — one with an exhaust fan and optional HEPA\/activated carbon filter — addresses this by directing emissions out of the room or filtering them before recirculating. This is particularly important for enclosed printing in living spaces, offices, or any area with limited natural ventilation.\u003c\/p\u003e\n\u003ch3\u003eRelated Parts\u003c\/h3\u003e\n\u003cp\u003eEnclosures work best when your printer's fundamentals are solid — start with a flat \u003ca href=\"\/collections\/3d-printer-beds\"\u003eheated bed\u003c\/a\u003e, a reliable \u003ca href=\"\/collections\/3d-printer-hotends\"\u003eall-metal hotend\u003c\/a\u003e capable of the temperatures ABS and ASA require, and proper \u003ca href=\"\/collections\/3d-printer-upgrades\"\u003eCapricorn PTFE tubing\u003c\/a\u003e rated for higher temperatures. Back to the full \u003ca href=\"\/pages\/3d-printer-parts\"\u003e3D Printer Parts \u0026amp; Accessories guide\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"zero-g-mercury-one-1-nebula-frame-kit-pro-and-plus-multiple-colors","title":"Zero G Mercury One.1 Nebula Frame Kit (Pro and Plus) Multiple Colors","description":"\u003ch2\u003eZero G Nebula Enclosure Frame Kit for Mercury One.1 — Pre-Cut, Tapped and Anodized 2020 Extrusions by LDO Motors, Pro (255) and Plus (370)\u003c\/h2\u003e\n\n\u003cp\u003e\n  The \u003cstrong\u003eZero G Nebula Frame Kit\u003c\/strong\u003e by LDO Motors is the complete\n  extrusion set for the \u003cstrong\u003eMercury One.1 Nebula enclosure\u003c\/strong\u003e —\n  every piece \u003cstrong\u003epre-cut to exact BOM length, tapped on both ends,\n  and anodized\u003c\/strong\u003e before it ships. No cutting, no tapping, no filing.\n  Available in two sizes — \u003cstrong\u003ePro (255)\u003c\/strong\u003e for Ender 5 Pro\n  conversions and \u003cstrong\u003ePlus (370)\u003c\/strong\u003e for Ender 5 Plus — and multiple\n  anodized color options. Add your own panels and hardware to complete\n  the Nebula enclosure.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  ⚠️ \u003cstrong\u003eExtrusions only.\u003c\/strong\u003e This kit does not include panels,\n  hardware fasteners, printed parts, or foam tape. For a complete build,\n  panels and a hardware kit are sold separately.\u003cbr\u003e\n  ⚠️ \u003cstrong\u003eDoes not reuse stock Ender 5 extrusions.\u003c\/strong\u003e The Nebula\n  frame is a full replacement — none of the original printer's extrusions\n  carry over into the enclosure build.\u003cbr\u003e\n  ⚠️ \u003cstrong\u003ePrinted parts required.\u003c\/strong\u003e Download all STLs from the\n  Zero G GitHub \/ documentation before starting the build.\n\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/NebulaExtrusionBOM.png?v=1745453027\" alt=\"Zero G Nebula extrusion BOM — complete pre-cut tapped anodized extrusion list for Mercury One.1 Pro 255 and Plus 370 frame kit by LDO Motors\" style=\"width:100%;height:auto;\"\u003e\n\n\u003ch3\u003ePre-Cut, Tapped, and Anodized — Ready to Build Out of the Box\u003c\/h3\u003e\n\u003cp\u003e\n  Most frame extrusion kits ship raw and require the builder to cut\n  lengths, tap ends, and deal with anodize-over-cut edges that look\n  unfinished. The LDO Nebula frame kit ships \u003cstrong\u003efully finished\u003c\/strong\u003e:\n  every extrusion is cut to its exact BOM-specified length, tapped at\n  both ends for M5 fasteners, and \u003cstrong\u003eanodized after cutting\u003c\/strong\u003e\n  — not before — so the cut faces are clean and the finish is consistent\n  across the entire frame. This is the same manufacturing standard LDO\n  applies to their Voron printer kits, applied here to the Nebula frame.\n  The result is a frame that assembles cleanly and looks finished from\n  every angle, not just from the front.\n\u003c\/p\u003e\n\n\u003ch3\u003eTwo Sizes — Pro (255) and Plus (370)\u003c\/h3\u003e\n\u003cp\u003e\n  The Nebula enclosure is designed around two Ender 5 platform sizes:\n\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eNebula Pro (255)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDesigned for the \u003cstrong\u003eEnder 5 Pro\u003c\/strong\u003e build volume — 255mm build platform\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003eNebula Plus (370)\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eDesigned for the \u003cstrong\u003eEnder 5 Plus\u003c\/strong\u003e build volume — 370mm build platform\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\n  Select the size that matches your Mercury One.1 build at checkout.\n  Each size ships with the complete extrusion set specific to that\n  configuration — no lengths are shared between sizes.\n\u003c\/p\u003e\n\n\u003ch3\u003eMultiple Anodized Colors — LDO Black and Space Grey\u003c\/h3\u003e\n\u003cp\u003e\n  The frame kit is available in \u003cstrong\u003eLDO Black\u003c\/strong\u003e and\n  \u003cstrong\u003eSpace Grey\u003c\/strong\u003e anodized finish — the same color options\n  used across LDO's full printer hardware lineup. The color selection\n  lets you match the aesthetic of your Mercury One.1 printed parts\n  and accent colors intentionally rather than working around whatever\n  color generic extrusion suppliers ship.\n\u003c\/p\u003e\n\n\u003ch3\u003eWhat Mercury One.1 Builders Need to Know\u003c\/h3\u003e\n\u003cp\u003e\n  The Nebula enclosure is the official Zero G enclosure solution for\n  the Mercury One.1 platform — a CoreXY conversion for the Ender 5\n  family designed by the Zero G team. The Nebula frame creates a\n  fully enclosed print volume around the Mercury One.1 motion system,\n  enabling ABS, ASA, and engineering material printing in a thermally\n  stable chamber. The frame kit here covers the enclosure extrusions\n  specifically — not the Mercury One.1 printer frame itself\n  (which uses the stock Ender 5 extrusions or a separate kit).\n\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLDO Motors\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDesign\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eZero G (ZeroG team)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible build\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMercury One.1 Nebula enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible base printer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEnder 5 Pro (Pro\/255) \/ Ender 5 Plus (Plus\/370)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtrusion profile\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2020 aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable sizes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePro — 255mm | Plus — 370mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAvailable colors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLDO Black \/ Space Grey (anodized)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCut\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePre-cut to exact BOM lengths\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTapped\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes — both ends, M5\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAnodized\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes — post-cut, full finish on cut faces\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReuses stock Ender 5 extrusions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo — complete replacement set\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e✅\u003c\/td\u003e\n\u003ctd\u003eComplete Nebula enclosure extrusion set — all lengths per BOM, pre-cut, tapped, anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's NOT Included\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e❌\u003c\/td\u003e\n\u003ctd\u003eAcrylic or polycarbonate panels — sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e❌\u003c\/td\u003e\n\u003ctd\u003eHardware and fastener kit (screws, T-nuts, hinges, foam tape) — sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e❌\u003c\/td\u003e\n\u003ctd\u003ePrinted parts — download STLs from Zero G GitHub and print before building\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e❌\u003c\/td\u003e\n\u003ctd\u003eMercury One.1 printer motion kit — sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhen Do You Need This?\u003c\/h3\u003e\n\u003cp\u003e\n  Order the Nebula frame kit when you're ready to add an enclosure\n  to your Mercury One.1 build — either as the final step in a new\n  build or as an upgrade to an existing open-frame Mercury One.1\n  that you want to enclose for high-temperature material printing.\n  The pre-cut, pre-tapped, pre-anodized extrusions eliminate the\n  most time-consuming and error-prone parts of frame construction,\n  letting you focus on the printed parts and assembly rather than\n  metal fabrication.\n\u003c\/p\u003e\n\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n    \u003ca href=\"https:\/\/docs.zerog.one\" target=\"_blank\" rel=\"noopener\"\u003e\n      Zero G Documentation — Mercury One.1 Nebula assembly guide, BOM, printed parts\n    \u003c\/a\u003e\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\n  Browse our full enclosure and frame selection at\n  \u003ca href=\"\/collections\/3d-printer-enclosures\"\u003e3D Printer Enclosures\u003c\/a\u003e, or\n  explore all printer upgrades at\n  \u003ca href=\"\/collections\/3d-printer-upgrades\"\u003e3D Printer Upgrades\u003c\/a\u003e.\n\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Pro (Nebula 255\/275) \/ Black","offer_id":52735655379238,"sku":"WES2767PROBLA","price":164.99,"currency_code":"USD","in_stock":true},{"title":"Pro (Nebula 255\/275) \/ Gray","offer_id":52735655412006,"sku":"WES2768PROGRA","price":164.99,"currency_code":"USD","in_stock":true},{"title":"Plus (Nebula 370\/377) \/ Black","offer_id":52735655444774,"sku":"WES2769PLUBLA","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Plus (Nebula 370\/377) \/ Gray","offer_id":52735655477542,"sku":"WES2770PLUGRA","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/zero-g-mercury-one1-nebula-frame-kit-pro-and-plus-multiple-colors-west3d-3d-printing-supplies-ldo-systems-526332.png?v=1773259426"},{"product_id":"ldo-door-panel-retailer-rubber-seal-for-2020-extrusions-4-5m-used-also-in-box-turtle-enclosure","title":"LDO Door Panel Retailer Rubber Seal for 2020 Extrusions 4.5m - Used also in Box Turtle Enclosure","description":"\u003cp\u003eVoron and Box Turtle enclosure builders often face issues with panel gaps causing noise and heat loss, which can affect print stability and enclosure temperature control. Without a proper seal, these gaps lead to inefficient enclosure performance and increased ambient noise.\u003c\/p\u003e\u003cp\u003eThis 4.5-meter LDO rubber door panel seal is designed specifically for 2020 aluminum extrusions, providing a tight gasket to eliminate gaps and reduce noise. Commonly used in LDO Systems Box Turtle enclosures and compatible with Voron 2.4 and Trident builds, this rubber seal enhances enclosure integrity and thermal retention. It’s an essential upgrade for users seeking quieter operation and better temperature stability in their CoreXY or Klipper-based printers.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eRubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e4.5 meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Extrusions\u003c\/td\u003e\n\u003ctd\u003e2020 Aluminum Extrusions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eVoron 2.4, Trident, Box Turtle Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEliminates panel gaps that cause noise and heat loss in enclosed printers like Voron 2.4 and Box Turtle.\u003c\/li\u003e\n\u003cli\u003eImproves thermal retention for more consistent printing temperatures in CoreXY and Klipper ecosystems.\u003c\/li\u003e\n\u003cli\u003eReduces ambient noise from enclosure panels, enhancing user experience during long prints.\u003c\/li\u003e\n\u003cli\u003eEasy retrofit for 2020 extrusion-based enclosures, including popular LDO Systems builds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders upgrading enclosure sealing for better temperature control.\u003c\/li\u003e\n\u003cli\u003eBox Turtle enclosure users needing a reliable rubber gasket for 2020 extrusions.\u003c\/li\u003e\n\u003cli\u003eCoreXY printer owners seeking to reduce noise and improve enclosure efficiency.\u003c\/li\u003e\n\u003cli\u003eKlipper ecosystem users focused on stable environmental conditions for high-quality prints.\u003c\/li\u003e\n\u003cli\u003eDIY enclosure builders using 2020 aluminum extrusions requiring effective door sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaintaining enclosure temperature and reducing drafts with this seal helps optimize printing with temperature-sensitive filaments.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — benefits from stable enclosure temperatures to reduce warping.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — quieter enclosure environment improves print monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/petg-filament\"\u003ePETG Filament\u003c\/a\u003e — consistent temperature helps prevent stringing and layer adhesion issues.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":52735665078566,"sku":"LDO3389","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/ldo-door-panel-retailer-rubber-seal-for-2020-extrusions-45m-used-also-in-box-turtle-enclosure-west3d-3d-printing-supplies-ldo-systems-1323389.jpg?v=1773259442"},{"product_id":"clicky-clack-door-panel-retainer-2-meter-rubber-seal-for-ccd-trident-2-4-and-2020-extrusions","title":"Rubber Panel Retainer Seal for Clicky Clack Door Trident \/ 2.4 and 2020 Extrusions","description":"\u003ch2\u003e2 Meters for Voron 2.4 \u0026amp; Trident (2020 Extrusions)\u003c\/h2\u003e\n\u003cp\u003eIf you're building or upgrading a Clicky Clack Door (CCD) on your Voron 2.4 or Voron Trident, this is the rubber seal you need. This 2-meter strip sits inside the slot of your 2020 aluminum extrusions and grips the edges of your acrylic panel — holding it firmly in place while creating a cleaner, tighter door assembly.\u003c\/p\u003e\n\u003cp\u003eOne 2-meter length is enough to go around all four sides of a standard Clicky Clack Door frame. It's the same panel retainer called out in the official CCD BOM, so there's no guesswork — just cut, fit, and done.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat Does This Rubber Seal Actually Do?\u003c\/h3\u003e\n\u003cp\u003eThink of it like the rubber trim inside a car door — it fills the gap between the metal frame and the glass. In your Voron door, it fills the slot of the 2020 extrusion and squeezes around the edge of your acrylic panel. This does two things:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolds the panel in place\u003c\/strong\u003e — no rattling, no shifting, no loose acrylic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCreates a tighter seal\u003c\/strong\u003e — improves chamber enclosure, which helps when printing ABS, ASA, Nylon, or any filament that needs heat retention.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinter\u003c\/th\u003e\n\u003cth\u003eCompatible?\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoron 2.4 (all sizes)\u003c\/td\u003e\n\u003ctd\u003e✅ Yes\u003c\/td\u003e\n\u003ctd\u003eStandard CCD BOM spec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoron Trident (all sizes)\u003c\/td\u003e\n\u003ctd\u003e✅ Yes\u003c\/td\u003e\n\u003ctd\u003eStandard CCD BOM spec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAny build using 2020 extrusions\u003c\/td\u003e\n\u003ctd\u003e✅ Yes\u003c\/td\u003e\n\u003ctd\u003ePanel must fit the extrusion slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanels thinner than 3mm (US acrylic)\u003c\/td\u003e\n\u003ctd\u003e⚠️ May need adjustment\u003c\/td\u003e\n\u003ctd\u003ePrint wedge shims or adjust panel sizing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2 meters (1 piece, cut to length)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtrusion compatibility\u003c\/td\u003e\n\u003ctd\u003e2020 aluminum extrusion (standard slot)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eRubber (flexible, compressible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical panel thickness\u003c\/td\u003e\n\u003ctd\u003e3mm acrylic (US standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e1 strip (sufficient for one full door frame)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch3\u003eHow to Install — Quick Overview\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut four lengths\u003c\/strong\u003e — measure each side of your door frame. Cut corners at a 45° miter angle for clean joints. Print the community miter guide if you want precise cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush the seal onto the panel edges first\u003c\/strong\u003e — slide each strip onto the edge of the acrylic before assembling the extrusions. This is much easier than inserting the seal after the frame is built.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlide the extrusions onto the seal\u003c\/strong\u003e — the shorter extrusions go on first, then the longer ones. The seal fits snugly, so work one end at a time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDon't over-insert\u003c\/strong\u003e — once a section of seal is in the extrusion slot, it won't slide easily. Start from one end and work your way down.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e⚠️ \u003cstrong\u003ePro tip from the community:\u003c\/strong\u003e If your panel is thinner than 3mm, print small wedge shims to push the panel forward so it presses firmly against the seal. This ensures a proper hold with no play.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWho Is This For?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoron 2.4 or Trident builders\u003c\/strong\u003e installing the Clicky Clack Door mod for the first time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoron owners replacing a worn or damaged panel retainer\u003c\/strong\u003e — the seal does compress over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnyone printing ABS, ASA, or Nylon\u003c\/strong\u003e who wants a tighter chamber seal to hold heat and reduce warping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilders using 2020 extrusions\u003c\/strong\u003e in any custom enclosure build that needs a clean, flexible panel retainer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e2 meters. One door. No more loose panels.\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":52735670452518,"sku":"LDO1637","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/clicky-clack-door-panel-retainer-2-meter-rubber-seal-for-ccd-trident-24-and-2020-extrusions-west3d-3d-printing-supplies-ldo-motors-511198.jpg?v=1773259449"},{"product_id":"colony-clacker-door-kit-for-micron-with-or-without-panel-fridge-door-clicky-clack-by-ldo-systems","title":"Colony Clacker Door Kit for Micron with or without Panel (Fridge Door \/ Clicky-Clack) by LDO Systems","description":"\u003ch2\u003eColony Clacker Door Kit for Micron 180 — Magnetic Fridge Door Latch, Foam Seal, 1515 Extrusions, by LDO Systems × PrintersForAnts\u003c\/h2\u003e\n\n\u003cp\u003e\n  The \u003cstrong\u003eColony Clacker\u003c\/strong\u003e brings the iconic Clicky-Clack fridge door\n  experience to the \u003cstrong\u003eMicron 180\u003c\/strong\u003e and other 1515-based Printers for Ants\n  builds. Designed from scratch by the PrintersForAnts community and manufactured by\n  LDO Systems, this is a \u003cstrong\u003ecomplete hardware kit\u003c\/strong\u003e — 1515 aluminum\n  extrusions, N52 magnets, dowel pins, all fasteners, and foam sealing tape — ready\n  to build with your printed parts and door panel. The magnetic latch delivers that\n  satisfying snap-shut \u003cem\u003eclack\u003c\/em\u003e on every close, and the foam tape seal keeps\n  your chamber temperature consistent for ABS, ASA, and high-temp engineering materials.\n\u003c\/p\u003e\n\n\u003cp\u003e\n  ⚠️ \u003cstrong\u003eMicron 180 only.\u003c\/strong\u003e This kit is sized for the 180mm version of\n  the Micron \/ Micron+. Not compatible with Micron 120, Salad Fork, or other PFA\n  printers without modification.\u003cbr\u003e\n  ⚠️ \u003cstrong\u003ePrinted parts are NOT included.\u003c\/strong\u003e You must print the Colony\n  Clacker STLs before assembling. All STLs are pre-oriented for printing and\n  available free on GitHub.\u003cbr\u003e\n  ⚠️ \u003cstrong\u003eDoor panel availability depends on variant selected.\u003c\/strong\u003e Check\n  your variant selection — this listing is available with or without the acrylic\n  panel.\u003cbr\u003e\n  ⚠️ \u003cstrong\u003eFoam tape quantity:\u003c\/strong\u003e Kit includes 1.3m of foam tape.\n  A double seal requires ~2.5m — plan accordingly if you want double seals\n  (leave no margin for error on cuts).\n\u003c\/p\u003e\n\n\u003ciframe title=\"Colony Clacker for Micron 180 — satisfying magnetic door clack in action\" src=\"https:\/\/www.youtube.com\/embed\/yi75DsFQ0eI\" width=\"100%\" height=\"480\" style=\"width:100%;height:auto;aspect-ratio:16\/9;\" allowfullscreen\u003e\n\u003c\/iframe\u003e\n\n\u003ch3\u003eNot a Scale — A Full Redesign for 1515 Printers\u003c\/h3\u003e\n\u003cp\u003e\n  The original Clicky-Clack Fridge Door by tanaes is designed for 2020-extrusion\n  Voron builds. Simply scaling it down to 1515 doesn't work — the geometry, tolerances,\n  hinge pin sizing, and magnet placement all need to be recalculated for a smaller\n  frame and lighter door panel. The Colony Clacker is a\n  \u003cstrong\u003ecomplete remodel from scratch\u003c\/strong\u003e, not a rescale. Hinge clearances\n  are tightened for the 1515 profile, the latch is optimized for the smaller door\n  mass, STLs are pre-oriented for best print quality using standard Voron settings,\n  and variants are provided for different panel and foam thicknesses — covering\n  frame-to-door distances from 2.8mm to 6.0mm in 0.2mm increments so the fit\n  is precise regardless of your panel material and foam spec.\n\u003c\/p\u003e\n\n\u003ch3\u003eN52 Magnets + Dowel Pin Hinges — The Clack Mechanism\u003c\/h3\u003e\n\u003cp\u003e\n  The satisfying snap of the Colony Clacker comes from \u003cstrong\u003e8× 6mm×3mm N52\n  magnets\u003c\/strong\u003e embedded in the printed latch body — N52 being the strongest\n  commercially available permanent magnet grade. When the door reaches the closed\n  position, the magnets engage with a definitive click that confirms the door is\n  sealed, not just resting against the frame. The hinges use \u003cstrong\u003e5mm×40mm\n  dowel pins\u003c\/strong\u003e through M5 split bushings for smooth, backlash-free rotation\n  that keeps the door aligned on every open and close cycle. On initial build,\n  if clacking is subdued, check that the two latch screws aren't overtightened\n  and allow a few sessions for the foam to compress and settle.\n\u003c\/p\u003e\n\n\u003ch3\u003eFoam Tape Seal — Chamber Temperature Where It Belongs\u003c\/h3\u003e\n\u003cp\u003e\n  Passive enclosures on small printers lose chamber heat fast through door gaps.\n  The Colony Clacker includes \u003cstrong\u003e3mm foam tape\u003c\/strong\u003e that compresses\n  against the frame when the door closes, creating a continuous perimeter seal.\n  This is what elevates the Colony Clacker from an aesthetic mod to a functional\n  upgrade — ABS and ASA printing on a Micron benefits directly from a properly\n  sealed door that holds chamber temperatures above the warping threshold. The\n  foam also cushions the door close, giving the clack a satisfying tactile feel\n  rather than a hard impact.\n\u003c\/p\u003e\n\n\u003ch3\u003e1515 Aluminum Extrusions — LDO Quality, Black Anodized\u003c\/h3\u003e\n\u003cp\u003e\n  The kit includes all \u003cstrong\u003e1515 aluminum extrusions\u003c\/strong\u003e needed for the\n  door frame in black anodized finish — matching the LDO Micron kit aesthetic.\n  Extrusions are cut to the correct lengths for the Micron 180 door geometry.\n  No additional cutting required.\n\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e✅\u003c\/td\u003e\n\u003ctd\u003e1515 aluminum extrusions — all lengths for Micron 180 door frame, black anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e✅\u003c\/td\u003e\n\u003ctd\u003e8× 6mm×3mm N52 magnets (latch)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e✅\u003c\/td\u003e\n\u003ctd\u003e4× 5mm×40mm dowel pins (hinges)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e✅\u003c\/td\u003e\n\u003ctd\u003e4× M5×7mm×8mm split bushings (hinges)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e✅\u003c\/td\u003e\n\u003ctd\u003eM3 fastener kit — BHCS and SHCS in required lengths, M3 hex nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e✅\u003c\/td\u003e\n\u003ctd\u003e1.3m foam tape — 3mm (single seal; 2.5m needed for double seal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e✅ (variant)\u003c\/td\u003e\n\u003ctd\u003eAcrylic door panel — if \"with panel\" variant selected\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's NOT Included\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e❌\u003c\/td\u003e\n\u003ctd\u003ePrinted parts — download STLs free from the Colony Clacker GitHub and print before assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e❌\u003c\/td\u003e\n\u003ctd\u003eDoor panel — if \"without panel\" variant selected\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e❌\u003c\/td\u003e\n\u003ctd\u003eAdditional foam tape for double seal — kit includes 1.3m, double seal requires ~2.5m total\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eHinge Variants — Panel and Foam Thickness\u003c\/h3\u003e\n\u003cp\u003e\n  Colony Clacker STLs include hinge variants sized for different frame-to-door\n  distances, from \u003cstrong\u003e2.8mm to 6.0mm in 0.2mm steps\u003c\/strong\u003e. The required\n  offset is embossed on the back of each hinge STL (e.g., \"6\" = 6mm). Select\n  the correct variant based on your panel thickness plus foam tape thickness.\n  For standard 3mm acrylic + 3mm foam, use the 6mm variant as a starting point\n  and adjust if the door doesn't close flush.\n\u003c\/p\u003e\n\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n    \u003ca href=\"https:\/\/github.com\/PrintersForAnts\/ColonyClacker?tab=readme-ov-file\" target=\"_blank\" rel=\"noopener\"\u003e\n      Colony Clacker GitHub — STLs, assembly instructions, BOM, hinge variant guide\n    \u003c\/a\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003ca href=\"https:\/\/youtube.com\/shorts\/yi75DsFQ0eI?si=P8Z4A60wTr4WiRiI\" target=\"_blank\" rel=\"noopener\"\u003e\n      Watch the Colony Clacker in action (YouTube Short)\n    \u003c\/a\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003ca href=\"https:\/\/github.com\/tanaes\/whopping_Voron_mods\/tree\/main\/clickyclacky_door\" target=\"_blank\" rel=\"noopener\"\u003e\n      Original Clicky-Clack Fridge Door mod by tanaes (Voron 2020 version)\n    \u003c\/a\u003e\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\n  Browse our full enclosure and panel selection at\n  \u003ca href=\"\/collections\/3d-printer-enclosures\"\u003e3D Printer Enclosures\u003c\/a\u003e, or explore all\n  Micron and PFA upgrades at\n  \u003ca href=\"\/collections\/3d-printer-upgrades\"\u003e3D Printer Upgrades\u003c\/a\u003e.\n\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Black","offer_id":52735671075110,"sku":"LDO3349BLA","price":19.99,"currency_code":"USD","in_stock":false},{"title":"Space Grey","offer_id":52735671107878,"sku":"LDO3350SPA","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/colony-clacker-door-kit-for-micron-with-or-without-panel-fridge-door-clicky-clack-west3d-3d-printing-supplies-ldo-systems-4446866_3ed3c201-3291-4e31-b0e2-bd13aa9e8028.png?v=1773259450"}],"url":"https:\/\/supplies3d.shop\/collections\/3d-printer-enclosures.oembed","provider":"SUPPLIES3D","version":"1.0","type":"link"}