{"title":"3D Printer Bed Surfaces","description":"\u003ch2\u003ePerfect Adhesion, Effortless Release\u003c\/h2\u003e\n\u003cp\u003eThe print surface is the single point of contact between your printer and every part you make. Get it right and first layers stick firmly, parts release cleanly, and you never reach for a glue stick again. Get it wrong and no amount of leveling, temperature tuning, or slicer adjustment fully compensates. A quality bed surface is one of the most impactful and affordable upgrades available for any FDM printer.\u003c\/p\u003e\n\u003ch3\u003ePEI Spring Steel Sheets — The Gold Standard\u003c\/h3\u003e\n\u003cp\u003ePEI (polyetherimide) coated spring steel sheets have become the preferred bed surface for most FDM printing. The science is simple: PLA, PETG, ABS, and most common filaments adhere firmly to PEI when the bed is hot, then release effortlessly as the sheet cools. The spring steel flexes slightly when removed from the magnetic base, popping parts off without tools, scrapers, or force. Textured PEI adds a subtle matte finish to the bottom of every part as a bonus.\u003c\/p\u003e\n\u003ch3\u003eBorosilicate Glass — Flat and Reliable\u003c\/h3\u003e\n\u003cp\u003eBorosilicate glass beds offer exceptional flatness straight out of the box — a real advantage when your aluminum bed has minor warping. Glass heats more slowly and holds temperature steadily once reached. It works well with PLA and PETG using a light application of glue stick or hairspray for adhesion, and parts release cleanly once cooled. It is heavier than steel sheets and doesn't flex for part removal, but for users who prioritize surface flatness above all else, glass remains a solid choice.\u003c\/p\u003e\n\u003ch3\u003eMagnetic Flex Plates\u003c\/h3\u003e\n\u003cp\u003eMagnetic flex plate systems consist of a magnetic base that adheres to your heated bed and a removable steel sheet that snaps on top. The convenience factor is high — swap surfaces in seconds for different materials, or keep a second sheet loaded with the next print while the first one cools. Most PEI spring steel systems use this magnetic base design.\u003c\/p\u003e\n\u003ch3\u003eWhich Surface for Which Filament?\u003c\/h3\u003e\n\u003cp\u003ePEI handles PLA, PETG, ABS, ASA, and TPU without adhesives. Glass works best with PLA and PETG. For Nylon and PC, a garolite or specialized high-temp surface performs better than standard PEI. Always check the recommended bed surface for your specific filament before printing.\u003c\/p\u003e\n\u003ch3\u003eRelated Parts\u003c\/h3\u003e\n\u003cp\u003eBed surfaces sit on top of your \u003ca href=\"\/collections\/3d-printer-beds\"\u003eheated bed platform\u003c\/a\u003e — if your aluminum bed is warped, replace it first for best results. Pair with an \u003ca href=\"\/collections\/auto-bed-leveling\"\u003eauto bed leveling sensor\u003c\/a\u003e to eliminate manual tramming entirely. Back to the full \u003ca href=\"\/pages\/3d-printer-parts\"\u003e3D Printer Parts \u0026amp; Accessories guide\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"biqu-panda-cryogrip-pro-cool-build-plate-for-bambu-labs-h2d-p1-x1-a1-and-a1-mini-double-sided","title":"Biqu Panda CryoGrip Pro Cool Build Plate for Bambu Labs H2D \/ P1 \/ X1 \/ A1 and A1 Mini - Double Sided","description":"\u003cp\u003eCold adhesion challenges on Bambu Lab printers like the X1, P1, and A1 series can cause print failures or warping when using standard build plates. Without a reliable surface, prints may detach mid-print or require high bed temperatures that limit material choices.\u003c\/p\u003e\u003cp\u003eThe BIQU Panda CryoGrip Pro Cool Build Plate is a double-sided, 7-layer composite plate engineered specifically for Bambu Labs H2D, P1, X1, A1, and A1 Mini printers. It delivers strong adhesion at lower bed temperatures without the need for adhesives or high heat, improving first layer reliability and print success. Its magnetic design allows quick plate swaps, and the two textured surfaces—Glacier and Frostbite—offer versatile grip options for different filament types. This build plate is ideal for users seeking consistent cold adhesion and easy print removal on Bambu Lab machines.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eBambu Labs H2D, P1, X1, A1, A1 Mini\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Plate Type\u003c\/td\u003e\n\u003ctd\u003eDouble-sided 7-layer composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface Textures\u003c\/td\u003e\n\u003ctd\u003eGlacier and Frostbite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdhesion Method\u003c\/td\u003e\n\u003ctd\u003eCold adhesion without adhesives or high heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnetic\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnsures reliable first layer adhesion on Bambu Lab H2D, P1, X1, and A1 series printers without high bed temperatures\u003c\/li\u003e\n\u003cli\u003eReduces print failures caused by warping or detachment during cold printing\u003c\/li\u003e\n\u003cli\u003eDouble-sided design offers versatile surface options for different filament types and print needs\u003c\/li\u003e\n\u003cli\u003eMagnetic plate enables fast and easy print removal and plate swaps\u003c\/li\u003e\n\u003cli\u003eEliminates the need for additional adhesives or surface treatments that can damage the plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBambu Labs X1 and P1 users upgrading to a more reliable build surface\u003c\/li\u003e\n\u003cli\u003eOwners of Bambu Labs A1 and A1 Mini seeking improved cold adhesion\u003c\/li\u003e\n\u003cli\u003eH2D printer operators requiring consistent print bed grip without high temperatures\u003c\/li\u003e\n\u003cli\u003eUsers printing PLA, PETG, and other filaments that benefit from lower bed temperatures\u003c\/li\u003e\n\u003cli\u003eAnyone wanting a magnetic, double-sided build plate for quick print removal on Bambu Lab machines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis build plate’s cold adhesion properties make it ideal for printing common filaments that require moderate bed temperatures.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — excellent adhesion on the CryoGrip Pro surface without warping\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/petg-filament\"\u003ePETG Filament\u003c\/a\u003e — improved bed grip at lower temperatures reduces print failures\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — stable adhesion for ABS prints on Bambu Lab printers with controlled cooling\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"X1 \/ P1 \/ A1 \/ Frostbite (light texture)","offer_id":52735659409702,"sku":"BTT2280","price":24.99,"currency_code":"USD","in_stock":true},{"title":"X1 \/ P1 \/ A1 \/ Glacier (smoother texture)","offer_id":52735659442470,"sku":"BTT2498X1 GLA","price":24.99,"currency_code":"USD","in_stock":true},{"title":"A1 Mini \/ Frostbite (light texture)","offer_id":52735659475238,"sku":"BTT2771A1 FRO","price":19.99,"currency_code":"USD","in_stock":true},{"title":"A1 Mini \/ Glacier (smoother texture)","offer_id":52735659508006,"sku":"BTT2500A1 GLA","price":19.99,"currency_code":"USD","in_stock":true},{"title":"H2D \/ H2S \/ Glacier (smoother texture)","offer_id":52735659540774,"sku":"BTT2883H2DGLA","price":42.99,"currency_code":"USD","in_stock":true},{"title":"H2D \/ H2S \/ Frostbite (light texture)","offer_id":52735659573542,"sku":"BTT3903H2DFRO","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/biqu-panda-cryogrip-pro-cool-build-plate-for-bambu-labs-p1-and-x1-double-sided-west3d-3d-printing-supplies-btt-451992.webp?v=1773259426"},{"product_id":"west3ds-ultra-rugged-pei-bed-flex-plates","title":"West3D's Ultra Rugged PEI Bed Flex Plates","description":"\u003ch2\u003eWest3D High Performance Black PEI Flex Plate — 0.65mm Spring Steel, 0.3mm PEI, High-Temp Magnetic Backing, Single and Double Sided\u003c\/h2\u003e\n\u003cp\u003eWest3D's own spring steel PEI flex plate — built thicker than anything else on the market and designed to outlast the plates you've been replacing. The spring steel sheet is \u003cstrong\u003e0.65mm thick\u003c\/strong\u003e — 30% thicker than West3D's own standard plates and more than double the thickness of most market alternatives. The PEI surface is \u003cstrong\u003e~0.3mm thick\u003c\/strong\u003e per side, also above standard. The result is a plate that holds its shape through hundreds of print cycles, doesn't curl at the edges, and gives you more surface life before the PEI wears thin. Available in single-sided smooth, double-sided smooth, double-sided smooth\/texture, double-sided texture, and single-sided texture — with or without the West3D logo etched on the smooth side.\u003c\/p\u003e\n\u003cp\u003e⚠️ \u003cstrong\u003ePETG on the smooth side will adhere aggressively.\u003c\/strong\u003e Always use a separating agent (glue stick or similar) on the smooth side when printing PETG. Printing PETG directly on smooth PEI without a release agent risks delaminating or permanently damaging the PEI film.\u003cbr\u003e⚠️ \u003cstrong\u003eContact probes (TAP, similar) on the smooth side.\u003c\/strong\u003e High-force contact probes can leave small impressions in the smooth PEI. These typically diminish when the plate is reheated and do not affect print quality, but if you use a TAP-style probe regularly, use the texture side for probing or consider a different smooth-side plate variant.\u003cbr\u003e⚠️ \u003cstrong\u003eSmooth side may ship with a protective film.\u003c\/strong\u003e Remove this film before printing.\u003cbr\u003e⚠️ \u003cstrong\u003eNot affiliated with or endorsed by Voron Design.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe style=\"width: 100%; height: auto; aspect-ratio: 16\/9;\" height=\"480\" width=\"100%\" src=\"https:\/\/www.youtube.com\/embed\/e8jOOx24plg?si=O8YjG04bdO8FJ3qr\" title=\"West3D PEI flex plate comparison — all printing surfaces reviewed by LeeMerie3D\"\u003e\n\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003e0.65mm Spring Steel — Why Thickness Matters\u003c\/h3\u003e\n\u003cp\u003eMost flex plates on the market use spring steel at 0.4–0.5mm. Thinner steel flexes more easily for part release, which sounds like an advantage until the plate starts developing a set — a permanent warp or bow that develops in thinner steel after repeated thermal cycling. At \u003cstrong\u003e0.65mm\u003c\/strong\u003e, this plate has enough stiffness to resist deformation over the long term while still providing the pop-off flex you need to release prints. Combined with the \u003cstrong\u003e~0.3mm PEI layer\u003c\/strong\u003e per side — substantially thicker than the thin-film PEI on most budget plates — this gives you more surface material to wear through before the plate degrades to the point of needing replacement.\u003c\/p\u003e\n\u003ch3\u003eSmooth Side — Glass-Like First Layer, Maximum Adhesion\u003c\/h3\u003e\n\u003cp\u003eThe smooth PEI surface delivers excellent adhesion to PLA, ABS, ASA, PC, and most engineering-grade filaments when the bed is at temperature. As the plate cools, adhesion releases and most prints pop off with minimal force. For filament types where you want guaranteed release on cool-down, the smooth side gives you the cleanest, flattest first-layer surface finish available on a flex plate. \u003cstrong\u003eUse a glue stick on the smooth side for PETG\u003c\/strong\u003e — without a release agent, PETG bonds directly to PEI so strongly that it will peel the film on removal.\u003c\/p\u003e\n\u003ch3\u003eTexture Side — Matte Finish, No Release Agent Needed for Most Materials\u003c\/h3\u003e\n\u003cp\u003eThe textured (powder-coated) side leaves an \u003cstrong\u003eultra-fine texture pattern\u003c\/strong\u003e on the first layer of your print — the aesthetic many Voron and CoreXY builders prefer for functional parts. The texture also provides mechanical grip rather than pure chemical adhesion, which means most materials release cleanly at room temperature without warping risk and without needing any release agent. It's also safer to use with contact probes like TAP since the textured surface is more resistant to impression marks than smooth PEI.\u003c\/p\u003e\n\u003ch3\u003eOversized Format — Easy On, Easy Off\u003c\/h3\u003e\n\u003cp\u003eLike all West3D flex plates, this plate is \u003cstrong\u003eslightly oversized relative to the nominal build area\u003c\/strong\u003e. This extra margin makes aligning the plate to your magnetic base faster and more forgiving — you're not trying to place a plate that exactly matches the magnet edge with no room for adjustment. The oversize is calculated to work with standard magnetic bases for each size without overhang issues on typical Voron-class printers.\u003c\/p\u003e\n\u003ch3\u003eAvailable Sizes and Variants\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eFor Build Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e125×125mm\u003c\/td\u003e\n\u003ctd\u003eVoron V0 and 120mm build printers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e255×255mm\u003c\/td\u003e\n\u003ctd\u003eVoron V2.4 250mm, Trident 250mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e305×305mm\u003c\/td\u003e\n\u003ctd\u003eVoron V2.4 300mm, Trident 300mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e355×355mm\u003c\/td\u003e\n\u003ctd\u003eVoron V2.4 350mm, Trident 350mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVariant\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eBest for\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-Sided Smooth\u003c\/td\u003e\n\u003ctd\u003eGlass-like finish, maximum part detail, glass-smooth bottom surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-Sided Texture\u003c\/td\u003e\n\u003ctd\u003eMatte texture finish only, TAP-safe probing side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDouble-Sided Smooth\u003c\/td\u003e\n\u003ctd\u003eTwo smooth surfaces — flip when one side needs a break\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDouble-Sided Smooth\/Texture\u003c\/td\u003e\n\u003ctd\u003eMost versatile — smooth for detail prints, texture for functional\/abrasive materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDouble-Sided Texture\u003c\/td\u003e\n\u003ctd\u003eMaximum durability, zero adhesion surprises, TAP-safe both sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMaterial Compatibility Guide\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePLA, PLA+\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e✅ Both sides — smooth for best surface finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eABS, ASA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e✅ Both sides — smooth side preferred for adhesion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e⚠️ Smooth side only WITH glue stick — texture side direct is safer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTPU \/ Flexibles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e✅ Texture side — easier release than smooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePC, PA, PA-CF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e✅ Smooth side with bed temp 80–110°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePEEK, PEI (ULTEM)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e⚠️ Verify magnetic backing temperature rating for your bed temp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSlicer Bed PNG Files\u003c\/h3\u003e\n\u003cp\u003eWest3D provides custom PNG bed images for use in your slicer's build plate visualization — sized for each plate variant, including logo and plain options:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/5C9E1168-8492-43EC-95D1-59AC3EC70BDF.png?v=1650526857\" target=\"_blank\"\u003e Slicer PNG — 355 \/ 305 \/ 255mm sizes \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/80CD92A3-2AFD-4601-AC2D-D6C95F501A1C.jpg?v=1650557784\" target=\"_blank\"\u003e Slicer PNG — 125mm size \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOther West3D Flex Plate Options\u003c\/h3\u003e\n\u003cp\u003eNot finding what you need in this listing? Browse West3D's full build surface lineup:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/west3d.com\/products\/super-stick-double-sided-flex-plate-for-high-warp-filaments\"\u003eSuper Stick Plates\u003c\/a\u003e — for high-warp filaments\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/west3d.com\/products\/peo-black-pei-performance-double-sided-flex-plates-with-high-temp-magnetic-backing\"\u003ePEO \/ Black PEI Plates\u003c\/a\u003e — PEO texture + black PEI\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/west3d.com\/products\/carbon-fiber-black-pei-performance-double-sided-flex-plates-with-high-temp-magnetic-backing\"\u003eCarbon Fiber \/ Black PEI Plates\u003c\/a\u003e — CF texture + black PEI\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/west3d.com\/products\/3dmp-single-sided-pei-flex-plate-smooth-and-texture\"\u003e3DMakerParts PEI Plates\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse our full build surface selection at \u003ca href=\"\/collections\/3d-printer-bed-surfaces\"\u003e3D Printer Bed Surfaces\u003c\/a\u003e, or explore all printer upgrade accessories at \u003ca href=\"\/collections\/3d-printer-upgrades\"\u003e3D Printer Upgrades\u003c\/a\u003e.\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"355x355mm (For 350mm Build Plates) \/ Single-Sided Smooth PEI","offer_id":52735671304486,"sku":"WES1714","price":48.99,"currency_code":"USD","in_stock":false},{"title":"305x305mm (For 300mm Build Plates) \/ Single-Sided Smooth PEI","offer_id":52735671337254,"sku":"WES1715","price":44.99,"currency_code":"USD","in_stock":false},{"title":"255x255mm (For 250mm Build Plates) \/ Single-Sided Smooth PEI","offer_id":52735671370022,"sku":"WES1716","price":35.99,"currency_code":"USD","in_stock":false},{"title":"125x125mm (For 120mm Build Plates) \/ Single-Sided Smooth PEI","offer_id":52735671402790,"sku":"WES1717","price":17.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/west3ds-ultra-rugged-pei-bed-flex-plates-west3d-3d-printing-supplies-west3d-printing-210614.jpg?v=1773259450"},{"product_id":"biqu-cryogrip-pro-glacier-build-plate-for-3d-printers-extreme-grip-semi-smooth-texture","title":"Biqu CryoGrip Pro Glacier Build Plate for 3D Printers - Extreme Grip Semi-Smooth Texture","description":"\u003ch2\u003eBIQU Panda CryoGrip Glacier Build Plate — Satin Texture, PLA \/ PETG \/ ABS \/ PA\u003c\/h2\u003e\n\n\u003cp\u003eThe Glacier is a satin-textured cool build plate with exceptional multi-material adhesion — strong grip at printing temperature, clean release when the plate cools. No glue, no hairspray, no bed prep. Works reliably with PLA, PETG, ABS, PA, and most other common filaments across a wide range of printer platforms. Available in six sizes covering everything from Ender 3 to large-format Voron builds.\u003c\/p\u003e\n\n\u003cp\u003eLooking for Cryo Plates for Bambu printers specifically? We have those \u003ca href=\"https:\/\/west3d.com\/products\/biqu-panda-cryo-cool-build-plate-for-bambu-labs-p1-and-x1-double-sided\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSatin Texture — Adhesion Without the Mess\u003c\/h3\u003e\n\u003cp\u003eThe Glacier's satin surface finish provides a balance between the aggressive grip of textured PEI and the smooth release of polished plates. Parts adhere firmly during printing and release cleanly once the plate drops to room temperature — no flex required, no spatula battles. The finish leaves a consistent satin surface on the bottom of prints, which is noticeably cleaner than the rough underside that textured PEI produces.\u003c\/p\u003e\n\n\u003ch3\u003eRecommended Settings\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePLA:\u003c\/strong\u003e bed temperature ~50°C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePETG:\u003c\/strong\u003e bed temperature ~70°C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eABS \/ PA:\u003c\/strong\u003e standard material temperatures apply\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e⚠ Do NOT use IPA on this plate\u003c\/strong\u003e — IPA degrades cool plate surfaces. Clean with water only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAvailable Sizes — Compatibility Guide\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSize\u003c\/th\u003e\n      \u003cth\u003eCompatible Printers\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003e235 × 235mm\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eCreality Ender 3 \/ Ender 3 V2 \/ Ender 3 Pro \/ Ender 3S \/ CR-20 \/ Ender 5 \/ Sovol SV05 \/ Flashforge AD5X and similar 235mm bed machines\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003e254.5 × 241mm\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003ePrusa MK4 \/ MK4S \/ MK3 \/ MK3S\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003e310 × 310mm\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eQIDI Plus4 \/ Voron 300 build and similar 300mm bed machines\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003e310 × 315mm\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eCreality K1 Max \/ Ender-3 V3 Plus \/ Ender-3 S1 Plus\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003e356 × 356mm\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eVoron 350 build and similar large-format machines\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003cstrong\u003e370 × 370mm\u003c\/strong\u003e\u003c\/td\u003e\n      \u003ctd\u003eCreality K2 Plus\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eMaterial Compatibility\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eFilament\u003c\/th\u003e\n      \u003cth\u003eRecommended Bed Temp\u003c\/th\u003e\n      \u003cth\u003ePerformance\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePLA\u003c\/td\u003e\n\u003ctd\u003e~50°C\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePETG\u003c\/td\u003e\n\u003ctd\u003e~70°C\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eVery Good\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePA (Nylon)\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eVery Good\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMost other filaments\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCare \u0026amp; Maintenance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDo NOT use IPA or any alcohol-based cleaner\u003c\/strong\u003e — this degrades the cool plate surface permanently\u003c\/li\u003e\n  \u003cli\u003eClean with warm water and a soft cloth\u003c\/li\u003e\n  \u003cli\u003eAllow the plate to cool fully before attempting to remove prints — the release is temperature-dependent\u003c\/li\u003e\n  \u003cli\u003eAvoid sharp tools on the print surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e→ Browse all \u003ca href=\"\/collections\/3d-printer-bed-surfaces\"\u003e3D Printer Bed Surfaces\u003c\/a\u003e or explore our full \u003ca href=\"\/collections\/3d-printer-upgrades\"\u003e3D Printer Upgrades\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"235x235mm (Ender 3\/V2\/Pro\/Ender 3S\/CR20\/Ender 5\/Sovol SV05\/Flashforge AD5X etc.)","offer_id":52735673893158,"sku":"BTT2558GLA","price":26.99,"currency_code":"USD","in_stock":true},{"title":"254.5x241 (PRUSA MK4\/MK4S\/MK3\/MK3S)","offer_id":52735673925926,"sku":"BTT2559254","price":26.99,"currency_code":"USD","in_stock":false},{"title":"310x310mm (Qidi Plus 4 \/ Voron etc.)","offer_id":52735673958694,"sku":"BTT2560300","price":35.99,"currency_code":"USD","in_stock":true},{"title":"310x315mm (K1 Max\/Ender-3 V3 PLUS\/Ender-3 S1 PLUS)","offer_id":52735673991462,"sku":"BTT2561310","price":36.99,"currency_code":"USD","in_stock":true},{"title":"356x356mm (Voron etc.)","offer_id":52735674024230,"sku":"BTT2562356","price":42.99,"currency_code":"USD","in_stock":false},{"title":"370x370mm (Creality K2 Plus)","offer_id":52735674056998,"sku":"BTT3838370","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/biqu-cryogrip-pro-glacier-build-plate-for-3d-printers-extreme-grip-semi-smooth-texture-west3d-3d-printing-supplies-btt-578539.webp?v=1773259454"},{"product_id":"honeybadger-gold-pei-smooth-textured-or-dual-textured-pei","title":"Honeybadger Gold pei Smooth \u0026 textured or dual textured PEI","description":"\u003cp\u003e3D printer users in the Voron and Klipper communities often face adhesion challenges that lead to print failures or warping, especially when printing with advanced materials. Without a reliable build surface, prints can detach mid-print, causing wasted time and filament.\u003c\/p\u003e\u003cp\u003eThe Honeybadger Gold Dual Smooth \u0026amp; Textured PEI plate by Fabreeko offers a versatile build surface with a 0.5mm genuine spring steel base and a 10 mil thick Sabic Ultem 1000 smooth side, twice the thickness of industry standards. This dual-sided plate provides a fine textured PEI side for superior adhesion and a smooth side for a matte finish, ideal for a wide range of filaments and print styles. It is widely used in high-performance CoreXY and Voron 2.4 builds, where reliable first-layer adhesion and easy part removal are critical. This Fabreeko 3D printer build surface upgrade enhances print reliability and surface quality for demanding users.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e0.5mm Genuine Spring Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmooth Side Thickness\u003c\/td\u003e\n\u003ctd\u003e0.25mm (10 mil) Sabic Ultem 1000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface Texture\u003c\/td\u003e\n\u003ctd\u003eDual-sided: Fine Textured PEI \u0026amp; Smooth PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eVoron 2.4, Trident, CoreXY Builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders benefit from the dual-textured surface for flexible adhesion options depending on filament type.\u003c\/li\u003e\n\u003cli\u003ePrevents print warping and detachment on high-temp filaments like ABS and polycarbonate.\u003c\/li\u003e\n\u003cli\u003eTwice the smooth side thickness reduces wear and extends build plate lifespan compared to standard PEI sheets.\u003c\/li\u003e\n\u003cli\u003eFine textured side improves first layer grip for challenging filaments such as PETG and nylon.\u003c\/li\u003e\n\u003cli\u003eCompatible with spring steel flex plates for easy print removal and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident users upgrading to a durable dual-sided PEI build surface.\u003c\/li\u003e\n\u003cli\u003eCoreXY builders requiring reliable adhesion for high-temp and engineering filaments.\u003c\/li\u003e\n\u003cli\u003eKlipper ecosystem users seeking consistent first layer adhesion and easy part release.\u003c\/li\u003e\n\u003cli\u003eAdvanced users printing ABS, PETG, nylon, and polycarbonate filaments.\u003c\/li\u003e\n\u003cli\u003eAnyone needing a flexible, long-lasting spring steel build plate upgrade.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis dual-textured PEI plate supports a wide range of filaments, enabling superior adhesion and surface finish for your prints.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — ideal for high-temp printing with excellent adhesion on textured PEI.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/polycarbonate-pc-filament\"\u003ePolycarbonate (PC) Filament\u003c\/a\u003e — benefits from the durable smooth Ultem surface for clean release.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — prints cleanly on the smooth side for a matte finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabreeko","offers":[{"title":"Smooth \u0026 textured \/ 125 mm (voron vzero)","offer_id":52904598602022,"sku":"A2-S0001","price":22.99,"currency_code":"USD","in_stock":false},{"title":"Smooth \u0026 textured \/ 160 mm","offer_id":52904598634790,"sku":"A2-S0003","price":22.99,"currency_code":"USD","in_stock":false},{"title":"Smooth \u0026 textured \/ 235 mm (creality)","offer_id":52904598667558,"sku":"A2-001345","price":27.99,"currency_code":"USD","in_stock":false},{"title":"Smooth \u0026 textured \/ 250 mm","offer_id":52904598700326,"sku":"A2-S0048","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Smooth \u0026 textured \/ 255x245 mm","offer_id":53144293605670,"sku":"A2-GST-125","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Smooth \u0026 textured \/ 255 mm (voron 250mm)","offer_id":52904598733094,"sku":"A2-S0049","price":34.99,"currency_code":"USD","in_stock":false},{"title":"Smooth \u0026 textured \/ 275 mm (zero G)","offer_id":52904598765862,"sku":"A2-275DGST","price":36.99,"currency_code":"USD","in_stock":false},{"title":"Smooth \u0026 textured \/ 276x293 mm (Snapmaker U1)","offer_id":53142602088742,"sku":"sku-48477500801279","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Smooth \u0026 textured \/ 280 mm (Qidi Q2)","offer_id":53143292674342,"sku":"sku-48477624533247","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Smooth \u0026 textured \/ 305 mm (voron 300mm)","offer_id":52904598798630,"sku":"A2-S0050","price":44.99,"currency_code":"USD","in_stock":false},{"title":"Smooth \u0026 textured \/ 310 mm (qidi Plus 4)","offer_id":52904598831398,"sku":"F1-310-ST","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Smooth \u0026 textured \/ 355 mm (voron 350mm)","offer_id":52904598864166,"sku":"A2-S0051","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Smooth \u0026 textured \/ 355x346 mm (Bambu H2D\/H2S No QR)","offer_id":53142602121510,"sku":"sku-48477500834047","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Smooth \u0026 textured \/ 377 mm (ender 5 plus \u0026 zeroG)","offer_id":52904598896934,"sku":"sku-47054792622335","price":59.99,"currency_code":"USD","in_stock":false},{"title":"Textured on both sides \/ 255x245 mm","offer_id":53144293638438,"sku":"A2-GST-126","price":28.99,"currency_code":"USD","in_stock":false},{"title":"Textured on both sides \/ 275 mm (zero G)","offer_id":52904598929702,"sku":"A2-HB275-DG","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Textured on both sides \/ 276x293 mm (Snapmaker U1)","offer_id":53142602154278,"sku":"sku-48477500866815","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Textured on both sides \/ 280 mm (Qidi Q2)","offer_id":53143292707110,"sku":"sku-48477624566015","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Textured on both sides \/ 310 mm (qidi Plus 4)","offer_id":52904598962470,"sku":"F1-310DG","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Textured on both sides \/ 355x346 mm (Bambu H2D\/H2S No QR)","offer_id":53142602187046,"sku":"sku-48477500899583","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Textured on both sides \/ 377 mm (ender 5 plus \u0026 zeroG)","offer_id":52904598995238,"sku":"F1-HB377DGT","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/4B6B2F88-9BFE-4878-B9C7-9D0F57C92512_1680x_ad640484-2ba5-4d70-85a2-57d52cb11c71.jpg?v=1774982639"},{"product_id":"honeybadger-zero-g-mercury-1-dual-sided-black-textured-smooth-pei-flex-plates","title":"HoneyBadger Zero G Mercury 1 Dual Sided Black Textured \u0026 Smooth PEI Flex Plates","description":"\u003cp\u003eReliable bed adhesion remains a critical challenge for CoreXY and high-speed FDM printers, where inconsistent first layers can cause print failures or warping. Without a durable, flexible build surface, users risk frequent print removals and bed damage.\u003c\/p\u003e\u003cp\u003eThe HoneyBadger Zero G Mercury 1 Dual Sided Black Textured \u0026amp; Smooth PEI Flex Plates offer a versatile solution with 0.5mm genuine spring steel base featuring a fine-textured powder-coated PEI on one side and a smooth Japanese Black P series PEI by Mitsubishi on the other. Designed for demanding 3D printer builds like Voron 2.4, Trident, and other CoreXY systems, these flex plates provide excellent adhesion for a wide range of filaments while enabling easy part removal through flexing. Fabreeko’s HoneyBadger quality ensures durability and consistent performance for users upgrading or replacing their build surfaces.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e0.5mm Genuine Spring Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface Sides\u003c\/td\u003e\n\u003ctd\u003eTextured Powder Coated PEI \/ Smooth Japanese Black P Series PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface Finish\u003c\/td\u003e\n\u003ctd\u003eDual-sided: Textured \u0026amp; Smooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eVoron 2.4, Trident, CoreXY Builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnsures reliable first layer adhesion on high-speed CoreXY printers like Voron 2.4 and Trident\u003c\/li\u003e\n\u003cli\u003eDual-sided design offers flexibility for different filament types and print requirements\u003c\/li\u003e\n\u003cli\u003eDurable 0.5mm spring steel resists warping and damage over extended use\u003c\/li\u003e\n\u003cli\u003eFacilitates easy print removal by flexing the plate, reducing risk of damaging prints or bed\u003c\/li\u003e\n\u003cli\u003eCompatible with a wide range of filaments including PLA, PETG, and ABS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders upgrading their flexible build surfaces\u003c\/li\u003e\n\u003cli\u003eCoreXY enthusiasts seeking durable dual-sided PEI flex plates\u003c\/li\u003e\n\u003cli\u003eUsers printing abrasive or high-temperature filaments requiring reliable adhesion\u003c\/li\u003e\n\u003cli\u003e3D printer owners replacing worn or damaged spring steel flex plates\u003c\/li\u003e\n\u003cli\u003eFabreeko HoneyBadger fans wanting premium quality build plates\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoosing the right filament complements the dual-sided PEI flex plate’s adhesion properties for optimal print quality.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — excellent adhesion on smooth PEI side for detailed prints\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/petg-filament\"\u003ePETG Filament\u003c\/a\u003e — textured PEI side improves grip and reduces warping\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — durable adhesion on textured side for high-temp printing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabreeko","offers":[{"title":"275*275 (for use with Fabreeko Mic 6 plate)","offer_id":52904599322918,"sku":"A2-S0223","price":48.99,"currency_code":"USD","in_stock":true},{"title":"377*370  (Stock Ender 5 plus size)","offer_id":52904599355686,"sku":"A2-B377DSB","price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/image_cc4978a9-595c-4eef-a01e-0d888eba16cc.jpg?v=1774982638"},{"product_id":"honeybadger-black-textured-pei","title":"HoneyBadger Black Textured PEI","description":"\u003cp\u003e3D printing enthusiasts building or upgrading Voron 2.4, Trident, and RatRig CoreXY printers know that bed adhesion is critical to print success — poor adhesion leads to warping, failed prints, and wasted filament. Reliable, textured PEI spring steel sheets prevent these issues by providing consistent first-layer grip without damaging prints or the build surface.\u003c\/p\u003e\u003cp\u003eThe HoneyBadger Black Textured PEI is a 0.5mm genuine spring steel sheet coated with a fine-textured, ultra-sticky powder-coated PEI surface. Designed for high-performance CoreXY and Cartesian printers like Voron 2.4, Trident, RatRig, and Ender 3 series, this single-sided flex plate offers excellent adhesion for a wide range of filaments including PLA, PETG, and ABS. Its durable spring steel base resists warping and can be paired with compatible magnets for easy removal and flexible print removal. The textured finish reduces the risk of prints sticking too aggressively, balancing adhesion and release perfectly for repeatable print success.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e0.5mm Genuine Spring Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface Finish\u003c\/td\u003e\n\u003ctd\u003eFine Textured Powder Coated PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet Type\u003c\/td\u003e\n\u003ctd\u003eSingle Sided\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eVoron 2.4, Trident, RatRig, Ender 3\/5\/S1\/Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnsures consistent first-layer adhesion on CoreXY printers like Voron 2.4 and Trident, reducing print failures.\u003c\/li\u003e\n\u003cli\u003eDurable spring steel base resists warping and damage over time compared to glass or aluminum beds.\u003c\/li\u003e\n\u003cli\u003eTextured PEI surface balances strong adhesion with easy print removal, ideal for PLA, PETG, and ABS filaments.\u003c\/li\u003e\n\u003cli\u003eCompatible with RatRig and Ender 3 series printers, providing a flexible upgrade path for popular builds.\u003c\/li\u003e\n\u003cli\u003eSingle-sided design simplifies installation and maintenance while delivering reliable print surface performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders upgrading to a reliable, textured PEI flex plate.\u003c\/li\u003e\n\u003cli\u003eRatRig CoreXY users seeking a durable, spring steel print surface with excellent adhesion.\u003c\/li\u003e\n\u003cli\u003eEnder 3\/5\/S1\/Pro owners replacing stock build plates for improved first-layer grip.\u003c\/li\u003e\n\u003cli\u003eUsers printing PLA, PETG, or ABS who need a balance of adhesion and easy print removal.\u003c\/li\u003e\n\u003cli\u003eCoreXY and Cartesian printer communities focused on consistent, repeatable print quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis textured PEI sheet pairs well with common filaments that benefit from reliable bed adhesion and smooth first layers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — ideal for beginners and everyday prints requiring good adhesion and easy removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/petg-filament\"\u003ePETG Filament\u003c\/a\u003e — benefits from textured PEI to reduce stringing and improve bed grip.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — textured PEI helps combat warping and improves adhesion for high-temp materials.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabreeko","offers":[{"title":"125x125 v0.2 fitment","offer_id":52904601026854,"sku":"A1-S125SBT","price":21.99,"currency_code":"USD","in_stock":true},{"title":"160x160","offer_id":52904601059622,"sku":"A1-S160SBT","price":24.99,"currency_code":"USD","in_stock":true},{"title":"185x185","offer_id":52904601092390,"sku":"A1-185SBT","price":26.99,"currency_code":"USD","in_stock":true},{"title":"190x190","offer_id":52904601125158,"sku":"A1-S190SBT","price":27.99,"currency_code":"USD","in_stock":true},{"title":"220x220","offer_id":52904601157926,"sku":"A2-S220SBT","price":27.99,"currency_code":"USD","in_stock":true},{"title":"235x235","offer_id":52904601190694,"sku":"A2-S235DST","price":28.5,"currency_code":"USD","in_stock":true},{"title":"241x254 Mk3s","offer_id":52904601223462,"sku":"A1-S241SBT","price":28.99,"currency_code":"USD","in_stock":false},{"title":"250x125  Idex","offer_id":52904601256230,"sku":"A1-Idex250","price":28.99,"currency_code":"USD","in_stock":true},{"title":"276x293 mm (Snapmaker U1)","offer_id":53146765951270,"sku":"sku-48482161230079","price":34.99,"currency_code":"USD","in_stock":true},{"title":"280 mm (Qidi Q2)","offer_id":53146765984038,"sku":"sku-48482161262847","price":34.99,"currency_code":"USD","in_stock":true},{"title":"305x305","offer_id":52904601288998,"sku":"A1-S0109","price":44.99,"currency_code":"USD","in_stock":false},{"title":"310x310","offer_id":52904601321766,"sku":"A1-310BT","price":44.99,"currency_code":"USD","in_stock":false},{"title":"320x320","offer_id":52904601354534,"sku":"A1-S320SBT","price":47.99,"currency_code":"USD","in_stock":true},{"title":"330x330","offer_id":52904601387302,"sku":"A1-S330SBT","price":49.99,"currency_code":"USD","in_stock":true},{"title":"355x346 mm (Bambu H2D\/H2S)","offer_id":53146766016806,"sku":"sku-48482161295615","price":54.99,"currency_code":"USD","in_stock":true},{"title":"355x355","offer_id":52904601420070,"sku":"A1-S355SBT","price":54.99,"currency_code":"USD","in_stock":false},{"title":"420x420","offer_id":52904601452838,"sku":"A1-S420SBT","price":79.99,"currency_code":"USD","in_stock":true},{"title":"520x520","offer_id":52904601485606,"sku":"F5-S520SBT","price":129.99,"currency_code":"USD","in_stock":true},{"title":"255x255 mm dual textured","offer_id":52904601518374,"sku":"F1-S255SBT","price":37.99,"currency_code":"USD","in_stock":false},{"title":"310x310 mm Dual Textured","offer_id":52904601551142,"sku":"A1-310DBT","price":49.99,"currency_code":"USD","in_stock":true},{"title":"410x410 mm dual textured","offer_id":52904601583910,"sku":"A1-410DTB","price":79.99,"currency_code":"USD","in_stock":true},{"title":"510x510 mm dual black textured","offer_id":52904601616678,"sku":"A1-S510-DBT","price":119.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/image_786a0ab0-9761-4965-b09e-d94f1bc60eb7.jpg?v=1774982639"},{"product_id":"honeybadger-p-series-smooth-black-pei-flex-plates-gen-2","title":"HoneyBadger P-Series Smooth Black PEI Flex Plates Gen 2","description":"\u003cp\u003eCoreXY and Cartesian 3D printer users often face adhesion challenges that lead to print failures or damage to build surfaces. Without a reliable flex plate, prints can warp or stick too aggressively, causing damage during removal and reducing print quality.\u003c\/p\u003e\u003cp\u003eThe HoneyBadger P-Series Smooth Black PEI Flex Plates Gen 2 offer a premium, flat Japanese PEI surface designed for excellent adhesion across a wide range of filaments. This Gen 2 version is approximately 0.7mm thick, combining a 0.5mm spring steel base with a smooth black PEI top layer, providing durability and flexibility for easy print removal. Popular among Voron 2.4, Trident, Ratrig V-Core, and Ender 3\/5\/S1\/Pro users, these flex plates improve print bed reliability and surface longevity. Note that PETG requires a release agent to prevent excessive bonding, and these plates are not recommended for Voron TAP due to potential nozzle indentation.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e0.5mm Spring Steel with Japanese Smooth Black PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Thickness\u003c\/td\u003e\n\u003ctd\u003e~0.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Temperature\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eVoron 2.4, Trident, Ratrig V-Core, Ender 3\/5\/S1\/Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident builders benefit from a perfectly flat, durable PEI surface that reduces print warping and improves first layer adhesion.\u003c\/li\u003e\n\u003cli\u003eRatrig V-Core users gain a flex plate sized with generous overhang for easy print removal and bed coverage.\u003c\/li\u003e\n\u003cli\u003eEnder 3\/5\/S1\/Pro owners experience enhanced print surface longevity and smoother print removal compared to stock beds.\u003c\/li\u003e\n\u003cli\u003eHigh-temperature resistance up to 120°C supports a wider range of filaments without surface degradation.\u003c\/li\u003e\n\u003cli\u003eSpring steel flexibility allows for effortless part removal, reducing damage to prints and the build plate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVoron 2.4 and Trident users upgrading to a more reliable and flat PEI flex plate.\u003c\/li\u003e\n\u003cli\u003eRatrig V-Core builders needing a larger flex plate with excellent adhesion and durability.\u003c\/li\u003e\n\u003cli\u003eEnder 3\/5\/S1\/Pro users replacing stock build surfaces for improved print adhesion and removal.\u003c\/li\u003e\n\u003cli\u003eCoreXY and Cartesian printers requiring a smooth PEI surface for consistent first layers.\u003c\/li\u003e\n\u003cli\u003eUsers printing PLA, ABS, PETG (with release agent), and other common filaments on flexible steel sheets.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoosing the right filament complements the HoneyBadger P-Series flex plate’s adhesion properties and durability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — ideal for smooth first layers and easy removal on PEI surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/petg-filament\"\u003ePETG Filament\u003c\/a\u003e — use with a release agent to prevent excessive bonding on smooth PEI.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — high-temp compatibility ensures stable adhesion without surface damage.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabreeko","offers":[{"title":"125x125 mm","offer_id":52904601714982,"sku":"A2-S0185","price":19.99,"currency_code":"USD","in_stock":false},{"title":"160x160 mm","offer_id":52904601747750,"sku":"A2-S0186","price":24.99,"currency_code":"USD","in_stock":true},{"title":"185x185 mm","offer_id":52904601780518,"sku":"A2-S0187","price":28.99,"currency_code":"USD","in_stock":true},{"title":"190x190 mm","offer_id":52904601813286,"sku":"A2-S0188","price":28.99,"currency_code":"USD","in_stock":true},{"title":"220x220 mm","offer_id":52904601846054,"sku":"A2-S0189","price":28.99,"currency_code":"USD","in_stock":true},{"title":"241x254 mm","offer_id":52904601878822,"sku":"A2-S0190","price":34.99,"currency_code":"USD","in_stock":true},{"title":"235x235 mm","offer_id":52904601911590,"sku":"A2-S0235P","price":34.99,"currency_code":"USD","in_stock":true},{"title":"255x255 mm","offer_id":52904601944358,"sku":"A2- S0191","price":37.99,"currency_code":"USD","in_stock":true},{"title":"305x305 mm","offer_id":52904601977126,"sku":"A2-S0192","price":47.99,"currency_code":"USD","in_stock":false},{"title":"310x310 mm","offer_id":52904602009894,"sku":"A2-310PS","price":47.99,"currency_code":"USD","in_stock":true},{"title":"320x320 mm","offer_id":52904602042662,"sku":"A2-S0193","price":48.99,"currency_code":"USD","in_stock":true},{"title":"330x330 mm","offer_id":52904602075430,"sku":"A2-S0194","price":49.99,"currency_code":"USD","in_stock":false},{"title":"355x355 mm","offer_id":52904602108198,"sku":"A2-S0195","price":54.99,"currency_code":"USD","in_stock":true},{"title":"410x410 mm","offer_id":52904602140966,"sku":"A1-S0196","price":69.99,"currency_code":"USD","in_stock":true},{"title":"510x510 mm","offer_id":52904602173734,"sku":"A1-S0197","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/image_19509d29-737d-4e24-8348-f2f1698ff221.jpg?v=1774982639"},{"product_id":"honeybadger-textured-smooth-pei-for-bambu-labs-x1-x1c-p1-p1s","title":"HoneyBadger Textured \u0026 Smooth PEI for Bambu Labs X1, X1C, P1 \u0026 P1S","description":"\u003cp\u003eUsers of Bambu Labs X1, X1C, P1, and P1S printers often face adhesion inconsistencies that lead to print failures or warping, especially with high-temperature or flexible filaments. Without a reliable build surface, prints can detach mid-process, wasting time and material.\u003c\/p\u003e\u003cp\u003eThe HoneyBadger Textured \u0026amp; Smooth PEI sheet by Fabreeko is a 0.5mm genuine spring steel plate designed specifically for Bambu Labs X1 series and P1 models. It features a dual-sided finish: one side with fine-textured, ultra-sticky powder-coated PEI for superior first-layer adhesion, and the other with smooth Japanese black PEI for easy part release. This build surface upgrade is favored by the Bambu Labs community for its durability, consistent adhesion, and compatibility with a wide range of filaments including PLA, PETG, and ABS. Note that these plates do not include a QR tag, so disabling build plate position detection in your printer settings is recommended to avoid print pauses.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Printers\u003c\/td\u003e\n\u003ctd\u003eBambu Labs X1, X1C, P1, P1S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e0.5mm Genuine Spring Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface Finish\u003c\/td\u003e\n\u003ctd\u003eDual-sided: Textured Powder-coated PEI \/ Smooth Japanese Black PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Surface Type\u003c\/td\u003e\n\u003ctd\u003ePEI Sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial Features\u003c\/td\u003e\n\u003ctd\u003eReal Carbon Fiber backing, Ultra-sticky adhesion, Durable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhy Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnsures consistent first-layer adhesion on Bambu Labs X1 and P1 series, reducing print failures.\u003c\/li\u003e\n\u003cli\u003eDual-sided design offers versatility for different filament types and print requirements.\u003c\/li\u003e\n\u003cli\u003eDurable spring steel construction resists warping and damage over extended use.\u003c\/li\u003e\n\u003cli\u003eFavored by Bambu Labs community for reliable performance and longevity.\u003c\/li\u003e\n\u003cli\u003eImproves print surface quality for both textured and smooth finishes depending on print needs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBambu Labs X1 and X1C users seeking a reliable, dual-sided build surface upgrade.\u003c\/li\u003e\n\u003cli\u003eP1 and P1S owners wanting improved adhesion and easy part release without frequent bed prep.\u003c\/li\u003e\n\u003cli\u003eEnthusiasts printing with PLA, PETG, ABS, and flexible filaments on Bambu Labs printers.\u003c\/li\u003e\n\u003cli\u003eUsers who prefer a durable spring steel plate that resists warping and maintains flatness.\u003c\/li\u003e\n\u003cli\u003eThose disabling QR tag detection to avoid unnecessary print pauses on Bambu Labs machines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePair With the Right Filament\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis HoneyBadger PEI sheet enhances adhesion and print quality, making it ideal for a variety of filament types on Bambu Labs printers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/pla-filament\"\u003ePLA Filament\u003c\/a\u003e — excellent adhesion on textured side for detailed prints.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/petg-filament\"\u003ePETG Filament\u003c\/a\u003e — strong bed grip reduces warping during printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/supplies3d.shop\/collections\/abs-filament\"\u003eABS Filament\u003c\/a\u003e — smooth side aids in clean part release after high-temp printing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fabreeko","offers":[{"title":"Dual Smooth","offer_id":52904602403110,"sku":"A1-s258DBS","price":30.59,"currency_code":"USD","in_stock":true},{"title":"Dual Textured black","offer_id":52904602435878,"sku":"A1-S258DBT","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Dual Textured Gold","offer_id":52904602468646,"sku":"A1-S258DGT","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Smooth\/Textured","offer_id":52904602501414,"sku":"A1-S0207","price":33.99,"currency_code":"USD","in_stock":false},{"title":"Smooth\/Carbon fiber","offer_id":52904602534182,"sku":"A1-S0208","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Dual Semi Satin, Black","offer_id":52904602566950,"sku":"A1-S258DSS","price":35.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1004\/1986\/2822\/files\/image_7c8b52a1-8812-4042-9358-b23c99eddcbd.jpg?v=1774982640"}],"url":"https:\/\/supplies3d.shop\/collections\/3d-printer-bed-surfaces.oembed","provider":"SUPPLIES3D","version":"1.0","type":"link"}